drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 190 insertions, 0 deletions

diff --git a/arch/alpha/boot/main.c b/arch/alpha/boot/main.c
new file mode 100644
index 000000000..22a1cb026
--- /dev/null
+++ b/arch/alpha/boot/main.c
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/alpha/boot/main.c
+ *
+ * Copyright (C) 1994, 1995 Linus Torvalds
+ *
+ * This file is the bootloader for the Linux/AXP kernel
+ */
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <generated/utsrelease.h>
+#include <linux/mm.h>
+
+#include <asm/console.h>
+#include <asm/hwrpb.h>
+
+#include <linux/stdarg.h>
+
+#include "ksize.h"
+
+extern unsigned long switch_to_osf_pal(unsigned long nr,
+	struct pcb_struct * pcb_va, struct pcb_struct * pcb_pa,
+	unsigned long *vptb);
+struct hwrpb_struct *hwrpb = INIT_HWRPB;
+static struct pcb_struct pcb_va[1];
+
+/*
+ * Find a physical address of a virtual object..
+ *
+ * This is easy using the virtual page table address.
+ */
+
+static inline void *
+find_pa(unsigned long *vptb, void *ptr)
+{
+	unsigned long address = (unsigned long) ptr;
+	unsigned long result;
+
+	result = vptb[address >> 13];
+	result >>= 32;
+	result <<= 13;
+	result |= address & 0x1fff;
+	return (void *) result;
+}	
+
+/*
+ * This function moves into OSF/1 pal-code, and has a temporary
+ * PCB for that. The kernel proper should replace this PCB with
+ * the real one as soon as possible.
+ *
+ * The page table muckery in here depends on the fact that the boot
+ * code has the L1 page table identity-map itself in the second PTE
+ * in the L1 page table. Thus the L1-page is virtually addressable
+ * itself (through three levels) at virtual address 0x200802000.
+ */
+
+#define VPTB	((unsigned long *) 0x200000000)
+#define L1	((unsigned long *) 0x200802000)
+
+void
+pal_init(void)
+{
+	unsigned long i, rev;
+	struct percpu_struct * percpu;
+	struct pcb_struct * pcb_pa;
+
+	/* Create the dummy PCB.  */
+	pcb_va->ksp = 0;
+	pcb_va->usp = 0;
+	pcb_va->ptbr = L1[1] >> 32;
+	pcb_va->asn = 0;
+	pcb_va->pcc = 0;
+	pcb_va->unique = 0;
+	pcb_va->flags = 1;
+	pcb_va->res1 = 0;
+	pcb_va->res2 = 0;
+	pcb_pa = find_pa(VPTB, pcb_va);
+
+	/*
+	 * a0 = 2 (OSF)
+	 * a1 = return address, but we give the asm the vaddr of the PCB
+	 * a2 = physical addr of PCB
+	 * a3 = new virtual page table pointer
+	 * a4 = KSP (but the asm sets it)
+	 */
+	srm_printk("Switching to OSF PAL-code .. ");
+
+	i = switch_to_osf_pal(2, pcb_va, pcb_pa, VPTB);
+	if (i) {
+		srm_printk("failed, code %ld\n", i);
+		__halt();
+	}
+
+	percpu = (struct percpu_struct *)
+		(INIT_HWRPB->processor_offset + (unsigned long) INIT_HWRPB);
+	rev = percpu->pal_revision = percpu->palcode_avail[2];
+
+	srm_printk("Ok (rev %lx)\n", rev);
+
+	tbia(); /* do it directly in case we are SMP */
+}
+
+static inline long openboot(void)
+{
+	char bootdev[256];
+	long result;
+
+	result = callback_getenv(ENV_BOOTED_DEV, bootdev, 255);
+	if (result < 0)
+		return result;
+	return callback_open(bootdev, result & 255);
+}
+
+static inline long close(long dev)
+{
+	return callback_close(dev);
+}
+
+static inline long load(long dev, unsigned long addr, unsigned long count)
+{
+	char bootfile[256];
+	extern char _end;
+	long result, boot_size = &_end - (char *) BOOT_ADDR;
+
+	result = callback_getenv(ENV_BOOTED_FILE, bootfile, 255);
+	if (result < 0)
+		return result;
+	result &= 255;
+	bootfile[result] = '\0';
+	if (result)
+		srm_printk("Boot file specification (%s) not implemented\n",
+		       bootfile);
+	return callback_read(dev, count, (void *)addr, boot_size/512 + 1);
+}
+
+/*
+ * Start the kernel.
+ */
+static void runkernel(void)
+{
+	__asm__ __volatile__(
+		"bis %1,%1,$30\n\t"
+		"bis %0,%0,$26\n\t"
+		"ret ($26)"
+		: /* no outputs: it doesn't even return */
+		: "r" (START_ADDR),
+		  "r" (PAGE_SIZE + INIT_STACK));
+}
+
+void start_kernel(void)
+{
+	long i;
+	long dev;
+	int nbytes;
+	char envval[256];
+
+	srm_printk("Linux/AXP bootloader for Linux " UTS_RELEASE "\n");
+	if (INIT_HWRPB->pagesize != 8192) {
+		srm_printk("Expected 8kB pages, got %ldkB\n", INIT_HWRPB->pagesize >> 10);
+		return;
+	}
+	pal_init();
+	dev = openboot();
+	if (dev < 0) {
+		srm_printk("Unable to open boot device: %016lx\n", dev);
+		return;
+	}
+	dev &= 0xffffffff;
+	srm_printk("Loading vmlinux ...");
+	i = load(dev, START_ADDR, KERNEL_SIZE);
+	close(dev);
+	if (i != KERNEL_SIZE) {
+		srm_printk("Failed (%lx)\n", i);
+		return;
+	}
+
+	nbytes = callback_getenv(ENV_BOOTED_OSFLAGS, envval, sizeof(envval));
+	if (nbytes < 0) {
+		nbytes = 0;
+	}
+	envval[nbytes] = '\0';
+	strcpy((char*)ZERO_PGE, envval);
+
+	srm_printk(" Ok\nNow booting the kernel\n");
+	runkernel();
+	for (i = 0 ; i < 0x100000000 ; i++)
+		/* nothing */;
+	__halt();
+}