diff options
| author | Niklas Cassel <cassel@kernel.org> | 2026-09-16 15:00:32 +0200 |
|---|---|---|
| committer | Niklas Cassel <cassel@kernel.org> | 2026-09-16 16:18:00 +0200 |
| commit | 8d836581f9b1f57ceaa2b47654754ef1260b410b (patch) | |
| tree | 1dbd4d0dfb99c2e238356cbe947e5b0be3e3a571 /Documentation/virt/kvm/x86 | |
| download | linux-stable-8d836581f9b1f57ceaa2b47654754ef1260b410b.tar.gz linux-stable-8d836581f9b1f57ceaa2b47654754ef1260b410b.zip | |
ata: libata-scsi: fix ata_dsm_trim_pages() kernel-docgrafted
make htmldocs fails with:
Documentation/driver-api/libata:604: ./drivers/ata/libata-scsi.c:2301:
ERROR: Unexpected indentation. [docutils]
The Return: section of ata_dsm_trim_pages() ends its first sentence with
a colon and continues with an indented bullet list. reStructuredText
requires a blank line before an indented block, so docutils chokes on
the list.
Simply adding the missing blank line does not work either: Return: is a
kernel-doc "special section", which is terminated by the first blank
line, so the bullet list would end up in the Description section,
detached from the sentence introducing it.
Spell the two bounds out as prose instead, so that the Return: section
stays self-contained. Documentation-only change.
Fixes: e64e6b5dc867 ("ata: libata-scsi: scale DSM TRIM payload by MAX PAGES PER DSM COMMAND")
Reported-by: Thomas Huth <thuth@redhat.com>
Closes: https://lore.kernel.org/linux-ide/b0a0b8e8-cc4f-4c7b-8bc5-fee0712d405a@redhat.com/
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20260916130031.29990-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Diffstat (limited to 'Documentation/virt/kvm/x86')
| -rw-r--r-- | Documentation/virt/kvm/x86/amd-memory-encryption.rst | 663 | ||||
| -rw-r--r-- | Documentation/virt/kvm/x86/cpuid.rst | 124 | ||||
| -rw-r--r-- | Documentation/virt/kvm/x86/errata.rst | 87 | ||||
| -rw-r--r-- | Documentation/virt/kvm/x86/hypercalls.rst | 192 | ||||
| -rw-r--r-- | Documentation/virt/kvm/x86/index.rst | 19 | ||||
| -rw-r--r-- | Documentation/virt/kvm/x86/intel-tdx.rst | 268 | ||||
| -rw-r--r-- | Documentation/virt/kvm/x86/mmu.rst | 507 | ||||
| -rw-r--r-- | Documentation/virt/kvm/x86/msr.rst | 390 | ||||
| -rw-r--r-- | Documentation/virt/kvm/x86/nested-vmx.rst | 244 | ||||
| -rw-r--r-- | Documentation/virt/kvm/x86/running-nested-guests.rst | 278 | ||||
| -rw-r--r-- | Documentation/virt/kvm/x86/timekeeping.rst | 645 |
11 files changed, 3417 insertions, 0 deletions
diff --git a/Documentation/virt/kvm/x86/amd-memory-encryption.rst b/Documentation/virt/kvm/x86/amd-memory-encryption.rst new file mode 100644 index 000000000..bd04a908a --- /dev/null +++ b/Documentation/virt/kvm/x86/amd-memory-encryption.rst @@ -0,0 +1,663 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================================== +Secure Encrypted Virtualization (SEV) +====================================== + +Overview +======== + +Secure Encrypted Virtualization (SEV) is a feature found on AMD processors. + +SEV is an extension to the AMD-V architecture which supports running +virtual machines (VMs) under the control of a hypervisor. When enabled, +the memory contents of a VM will be transparently encrypted with a key +unique to that VM. + +The hypervisor can determine the SEV support through the CPUID +instruction. The CPUID function 0x8000001f reports information related +to SEV:: + + 0x8000001f[eax]: + Bit[1] indicates support for SEV + ... + [ecx]: + Bits[31:0] Number of encrypted guests supported simultaneously + +If support for SEV is present, MSR 0xc001_0010 (MSR_AMD64_SYSCFG) and MSR 0xc001_0015 +(MSR_K7_HWCR) can be used to determine if it can be enabled:: + + 0xc001_0010: + Bit[23] 1 = memory encryption can be enabled + 0 = memory encryption can not be enabled + + 0xc001_0015: + Bit[0] 1 = memory encryption can be enabled + 0 = memory encryption can not be enabled + +When SEV support is available, it can be enabled in a specific VM by +setting the SEV bit before executing VMRUN.:: + + VMCB[0x90]: + Bit[1] 1 = SEV is enabled + 0 = SEV is disabled + +SEV hardware uses ASIDs to associate a memory encryption key with a VM. +Hence, the ASID for the SEV-enabled guests must be from 1 to a maximum value +defined in the CPUID 0x8000001f[ecx] field. + +The KVM_MEMORY_ENCRYPT_OP ioctl +=============================== + +The main ioctl to access SEV is KVM_MEMORY_ENCRYPT_OP, which operates on +the VM file descriptor. If the argument to KVM_MEMORY_ENCRYPT_OP is NULL, +the ioctl returns 0 if SEV is enabled and ``ENOTTY`` if it is disabled +(on some older versions of Linux, the ioctl tries to run normally even +with a NULL argument, and therefore will likely return ``EFAULT`` instead +of zero if SEV is enabled). If non-NULL, the argument to +KVM_MEMORY_ENCRYPT_OP must be a struct kvm_sev_cmd:: + + struct kvm_sev_cmd { + __u32 id; + __u64 data; + __u32 error; + __u32 sev_fd; + }; + + +The ``id`` field contains the subcommand, and the ``data`` field points to +another struct containing arguments specific to command. The ``sev_fd`` +should point to a file descriptor that is opened on the ``/dev/sev`` +device, if needed (see individual commands). + +On output, ``error`` is zero on success, or an error code. Error codes +are defined in ``<linux/psp-dev.h>``. + +KVM implements the following commands to support common lifecycle events of SEV +guests, such as launching, running, snapshotting, migrating and decommissioning. + +1. KVM_SEV_INIT2 +---------------- + +The KVM_SEV_INIT2 command is used by the hypervisor to initialize the SEV platform +context. In a typical workflow, this command should be the first command issued. + +For this command to be accepted, either KVM_X86_SEV_VM or KVM_X86_SEV_ES_VM +must have been passed to the KVM_CREATE_VM ioctl. A virtual machine created +with those machine types in turn cannot be run until KVM_SEV_INIT2 is invoked. + +Parameters: struct kvm_sev_init (in) + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_init { + __u64 vmsa_features; /* initial value of features field in VMSA */ + __u32 flags; /* must be 0 */ + __u16 ghcb_version; /* maximum guest GHCB version allowed */ + __u16 pad1; + __u32 pad2[8]; + }; + +It is an error if the hypervisor does not support any of the bits that +are set in ``flags`` or ``vmsa_features``. ``vmsa_features`` must be +0 for SEV virtual machines, as they do not have a VMSA. + +``ghcb_version`` must be 0 for SEV virtual machines, as they do not issue GHCB +requests. If ``ghcb_version`` is 0 for any other guest type, then the maximum +allowed guest GHCB protocol will default to version 2. + +This command replaces the deprecated KVM_SEV_INIT and KVM_SEV_ES_INIT commands. +The commands did not have any parameters (the ```data``` field was unused) and +only work for the KVM_X86_DEFAULT_VM machine type (0). + +They behave as if: + +* the VM type is KVM_X86_SEV_VM for KVM_SEV_INIT, or KVM_X86_SEV_ES_VM for + KVM_SEV_ES_INIT + +* the ``flags`` and ``vmsa_features`` fields of ``struct kvm_sev_init`` are + set to zero, and ``ghcb_version`` is set to 0 for KVM_SEV_INIT and 1 for + KVM_SEV_ES_INIT. + +If the ``KVM_X86_SEV_VMSA_FEATURES`` attribute does not exist, the hypervisor only +supports KVM_SEV_INIT and KVM_SEV_ES_INIT. In that case, note that KVM_SEV_ES_INIT +might set the debug swap VMSA feature (bit 5) depending on the value of the +``debug_swap`` parameter of ``kvm-amd.ko``. + +2. KVM_SEV_LAUNCH_START +----------------------- + +The KVM_SEV_LAUNCH_START command is used for creating the memory encryption +context. To create the encryption context, user must provide a guest policy, +the owner's public Diffie-Hellman (PDH) key and session information. + +Parameters: struct kvm_sev_launch_start (in/out) + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_launch_start { + __u32 handle; /* if zero then firmware creates a new handle */ + __u32 policy; /* guest's policy */ + + __u64 dh_uaddr; /* userspace address pointing to the guest owner's PDH key */ + __u32 dh_len; + + __u64 session_addr; /* userspace address which points to the guest session information */ + __u32 session_len; + }; + +On success, the 'handle' field contains a new handle and on error, a negative value. + +KVM_SEV_LAUNCH_START requires the ``sev_fd`` field to be valid. + +For more details, see SEV spec Section 6.2. + +3. KVM_SEV_LAUNCH_UPDATE_DATA +----------------------------- + +The KVM_SEV_LAUNCH_UPDATE_DATA is used for encrypting a memory region. It also +calculates a measurement of the memory contents. The measurement is a signature +of the memory contents that can be sent to the guest owner as an attestation +that the memory was encrypted correctly by the firmware. + +Parameters (in): struct kvm_sev_launch_update_data + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_launch_update { + __u64 uaddr; /* userspace address to be encrypted (must be 16-byte aligned) */ + __u32 len; /* length of the data to be encrypted (must be 16-byte aligned) */ + }; + +For more details, see SEV spec Section 6.3. + +4. KVM_SEV_LAUNCH_MEASURE +------------------------- + +The KVM_SEV_LAUNCH_MEASURE command is used to retrieve the measurement of the +data encrypted by the KVM_SEV_LAUNCH_UPDATE_DATA command. The guest owner may +wait to provide the guest with confidential information until it can verify the +measurement. Since the guest owner knows the initial contents of the guest at +boot, the measurement can be verified by comparing it to what the guest owner +expects. + +If len is zero on entry, the measurement blob length is written to len and +uaddr is unused. + +Parameters (in): struct kvm_sev_launch_measure + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_launch_measure { + __u64 uaddr; /* where to copy the measurement */ + __u32 len; /* length of measurement blob */ + }; + +For more details on the measurement verification flow, see SEV spec Section 6.4. + +5. KVM_SEV_LAUNCH_FINISH +------------------------ + +After completion of the launch flow, the KVM_SEV_LAUNCH_FINISH command can be +issued to make the guest ready for the execution. + +Returns: 0 on success, -negative on error + +6. KVM_SEV_GUEST_STATUS +----------------------- + +The KVM_SEV_GUEST_STATUS command is used to retrieve status information about a +SEV-enabled guest. + +Parameters (out): struct kvm_sev_guest_status + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_guest_status { + __u32 handle; /* guest handle */ + __u32 policy; /* guest policy */ + __u8 state; /* guest state (see enum below) */ + }; + +SEV guest state: + +:: + + enum { + SEV_STATE_INVALID = 0; + SEV_STATE_LAUNCHING, /* guest is currently being launched */ + SEV_STATE_SECRET, /* guest is being launched and ready to accept the ciphertext data */ + SEV_STATE_RUNNING, /* guest is fully launched and running */ + SEV_STATE_RECEIVING, /* guest is being migrated in from another SEV machine */ + SEV_STATE_SENDING /* guest is getting migrated out to another SEV machine */ + }; + +7. KVM_SEV_DBG_DECRYPT +---------------------- + +The KVM_SEV_DEBUG_DECRYPT command can be used by the hypervisor to request the +firmware to decrypt the data at the given memory region. + +Parameters (in): struct kvm_sev_dbg + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_dbg { + __u64 src_uaddr; /* userspace address of data to decrypt */ + __u64 dst_uaddr; /* userspace address of destination */ + __u32 len; /* length of memory region to decrypt */ + }; + +The command returns an error if the guest policy does not allow debugging. + +8. KVM_SEV_DBG_ENCRYPT +---------------------- + +The KVM_SEV_DEBUG_ENCRYPT command can be used by the hypervisor to request the +firmware to encrypt the data at the given memory region. + +Parameters (in): struct kvm_sev_dbg + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_dbg { + __u64 src_uaddr; /* userspace address of data to encrypt */ + __u64 dst_uaddr; /* userspace address of destination */ + __u32 len; /* length of memory region to encrypt */ + }; + +The command returns an error if the guest policy does not allow debugging. + +9. KVM_SEV_LAUNCH_SECRET +------------------------ + +The KVM_SEV_LAUNCH_SECRET command can be used by the hypervisor to inject secret +data after the measurement has been validated by the guest owner. + +Parameters (in): struct kvm_sev_launch_secret + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_launch_secret { + __u64 hdr_uaddr; /* userspace address containing the packet header */ + __u32 hdr_len; + + __u64 guest_uaddr; /* the guest memory region where the secret should be injected */ + __u32 guest_len; + + __u64 trans_uaddr; /* the hypervisor memory region which contains the secret */ + __u32 trans_len; + }; + +10. KVM_SEV_GET_ATTESTATION_REPORT +---------------------------------- + +The KVM_SEV_GET_ATTESTATION_REPORT command can be used by the hypervisor to query the attestation +report containing the SHA-256 digest of the guest memory and VMSA passed through the KVM_SEV_LAUNCH +commands and signed with the PEK. The digest returned by the command should match the digest +used by the guest owner with the KVM_SEV_LAUNCH_MEASURE. + +If len is zero on entry, the measurement blob length is written to len and +uaddr is unused. + +Parameters (in): struct kvm_sev_attestation + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_attestation_report { + __u8 mnonce[16]; /* A random mnonce that will be placed in the report */ + + __u64 uaddr; /* userspace address where the report should be copied */ + __u32 len; + }; + +11. KVM_SEV_SEND_START +---------------------- + +The KVM_SEV_SEND_START command can be used by the hypervisor to create an +outgoing guest encryption context. + +If session_len is zero on entry, the length of the guest session information is +written to session_len and all other fields are not used. + +Parameters (in): struct kvm_sev_send_start + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_send_start { + __u32 policy; /* guest policy */ + + __u64 pdh_cert_uaddr; /* platform Diffie-Hellman certificate */ + __u32 pdh_cert_len; + + __u64 plat_certs_uaddr; /* platform certificate chain */ + __u32 plat_certs_len; + + __u64 amd_certs_uaddr; /* AMD certificate */ + __u32 amd_certs_len; + + __u64 session_uaddr; /* Guest session information */ + __u32 session_len; + }; + +12. KVM_SEV_SEND_UPDATE_DATA +---------------------------- + +The KVM_SEV_SEND_UPDATE_DATA command can be used by the hypervisor to encrypt the +outgoing guest memory region with the encryption context creating using +KVM_SEV_SEND_START. + +If hdr_len or trans_len are zero on entry, the length of the packet header and +transport region are written to hdr_len and trans_len respectively, and all +other fields are not used. + +Parameters (in): struct kvm_sev_send_update_data + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_launch_send_update_data { + __u64 hdr_uaddr; /* userspace address containing the packet header */ + __u32 hdr_len; + + __u64 guest_uaddr; /* the source memory region to be encrypted */ + __u32 guest_len; + + __u64 trans_uaddr; /* the destination memory region */ + __u32 trans_len; + }; + +13. KVM_SEV_SEND_FINISH +------------------------ + +After completion of the migration flow, the KVM_SEV_SEND_FINISH command can be +issued by the hypervisor to delete the encryption context. + +Returns: 0 on success, -negative on error + +14. KVM_SEV_SEND_CANCEL +------------------------ + +After completion of SEND_START, but before SEND_FINISH, the source VMM can issue the +SEND_CANCEL command to stop a migration. This is necessary so that a cancelled +migration can restart with a new target later. + +Returns: 0 on success, -negative on error + +15. KVM_SEV_RECEIVE_START +------------------------- + +The KVM_SEV_RECEIVE_START command is used for creating the memory encryption +context for an incoming SEV guest. To create the encryption context, the user must +provide a guest policy, the platform public Diffie-Hellman (PDH) key and session +information. + +Parameters: struct kvm_sev_receive_start (in/out) + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_receive_start { + __u32 handle; /* if zero then firmware creates a new handle */ + __u32 policy; /* guest's policy */ + + __u64 pdh_uaddr; /* userspace address pointing to the PDH key */ + __u32 pdh_len; + + __u64 session_uaddr; /* userspace address which points to the guest session information */ + __u32 session_len; + }; + +On success, the 'handle' field contains a new handle and on error, a negative value. + +For more details, see SEV spec Section 6.12. + +16. KVM_SEV_RECEIVE_UPDATE_DATA +------------------------------- + +The KVM_SEV_RECEIVE_UPDATE_DATA command can be used by the hypervisor to copy +the incoming buffers into the guest memory region with encryption context +created during the KVM_SEV_RECEIVE_START. + +Parameters (in): struct kvm_sev_receive_update_data + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_launch_receive_update_data { + __u64 hdr_uaddr; /* userspace address containing the packet header */ + __u32 hdr_len; + + __u64 guest_uaddr; /* the destination guest memory region */ + __u32 guest_len; + + __u64 trans_uaddr; /* the incoming buffer memory region */ + __u32 trans_len; + }; + +17. KVM_SEV_RECEIVE_FINISH +-------------------------- + +After completion of the migration flow, the KVM_SEV_RECEIVE_FINISH command can be +issued by the hypervisor to make the guest ready for execution. + +Returns: 0 on success, -negative on error + +18. KVM_SEV_SNP_LAUNCH_START +---------------------------- + +The KVM_SNP_LAUNCH_START command is used for creating the memory encryption +context for the SEV-SNP guest. It must be called prior to issuing +KVM_SEV_SNP_LAUNCH_UPDATE or KVM_SEV_SNP_LAUNCH_FINISH; + +Parameters (in): struct kvm_sev_snp_launch_start + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_snp_launch_start { + __u64 policy; /* Guest policy to use. */ + __u8 gosvw[16]; /* Guest OS visible workarounds. */ + __u16 flags; /* Must be zero. */ + __u8 pad0[6]; + __u64 pad1[4]; + }; + +See SNP_LAUNCH_START in the SEV-SNP specification [snp-fw-abi]_ for further +details on the input parameters in ``struct kvm_sev_snp_launch_start``. + +19. KVM_SEV_SNP_LAUNCH_UPDATE +----------------------------- + +The KVM_SEV_SNP_LAUNCH_UPDATE command is used for loading userspace-provided +data into a guest GPA range, measuring the contents into the SNP guest context +created by KVM_SEV_SNP_LAUNCH_START, and then encrypting/validating that GPA +range so that it will be immediately readable using the encryption key +associated with the guest context once it is booted, after which point it can +attest the measurement associated with its context before unlocking any +secrets. + +It is required that the GPA ranges initialized by this command have had the +KVM_MEMORY_ATTRIBUTE_PRIVATE attribute set in advance. See the documentation +for KVM_SET_MEMORY_ATTRIBUTES for more details on this aspect. + +Upon success, this command is not guaranteed to have processed the entire +range requested. Instead, the ``gfn_start``, ``uaddr``, and ``len`` fields of +``struct kvm_sev_snp_launch_update`` will be updated to correspond to the +remaining range that has yet to be processed. The caller should continue +calling this command until those fields indicate the entire range has been +processed, e.g. ``len`` is 0, ``gfn_start`` is equal to the last GFN in the +range plus 1, and ``uaddr`` is the last byte of the userspace-provided source +buffer address plus 1. In the case where ``type`` is KVM_SEV_SNP_PAGE_TYPE_ZERO, +``uaddr`` will be ignored completely. + +Parameters (in): struct kvm_sev_snp_launch_update + +Returns: 0 on success, < 0 on error, -EAGAIN if caller should retry + +:: + + struct kvm_sev_snp_launch_update { + __u64 gfn_start; /* Guest page number to load/encrypt data into. */ + __u64 uaddr; /* 4k-aligned address of data to be loaded/encrypted. */ + __u64 len; /* 4k-aligned length in bytes to copy into guest memory.*/ + __u8 type; /* The type of the guest pages being initialized. */ + __u8 pad0; + __u16 flags; /* Must be zero. */ + __u32 pad1; + __u64 pad2[4]; + + }; + +where the allowed values for page_type are #define'd as:: + + KVM_SEV_SNP_PAGE_TYPE_NORMAL + KVM_SEV_SNP_PAGE_TYPE_ZERO + KVM_SEV_SNP_PAGE_TYPE_UNMEASURED + KVM_SEV_SNP_PAGE_TYPE_SECRETS + KVM_SEV_SNP_PAGE_TYPE_CPUID + +See the SEV-SNP spec [snp-fw-abi]_ for further details on how each page type is +used/measured. + +20. KVM_SEV_SNP_LAUNCH_FINISH +----------------------------- + +After completion of the SNP guest launch flow, the KVM_SEV_SNP_LAUNCH_FINISH +command can be issued to make the guest ready for execution. + +Parameters (in): struct kvm_sev_snp_launch_finish + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_snp_launch_finish { + __u64 id_block_uaddr; + __u64 id_auth_uaddr; + __u8 id_block_en; + __u8 auth_key_en; + __u8 vcek_disabled; + __u8 host_data[32]; + __u8 pad0[3]; + __u16 flags; /* Must be zero */ + __u64 pad1[4]; + }; + + +See SNP_LAUNCH_FINISH in the SEV-SNP specification [snp-fw-abi]_ for further +details on the input parameters in ``struct kvm_sev_snp_launch_finish``. + +21. KVM_SEV_SNP_ENABLE_REQ_CERTS +-------------------------------- + +The KVM_SEV_SNP_ENABLE_REQ_CERTS command will configure KVM to exit to +userspace with a ``KVM_EXIT_SNP_REQ_CERTS`` exit type as part of handling +a guest attestation report, which will to allow userspace to provide a +certificate corresponding to the endorsement key used by firmware to sign +that attestation report. + +Returns: 0 on success, -negative on error + +NOTE: The endorsement key used by firmware may change as a result of +management activities like updating SEV-SNP firmware or loading new +endorsement keys, so some care should be taken to keep the returned +certificate data in sync with the actual endorsement key in use by +firmware at the time the attestation request is sent to SNP firmware. The +recommended scheme to do this is to use file locking (e.g. via fcntl()'s +F_OFD_SETLK) in the following manner: + + - Prior to obtaining/providing certificate data as part of servicing an + exit type of ``KVM_EXIT_SNP_REQ_CERTS``, the VMM should obtain a + shared/read or exclusive/write lock on the certificate blob file before + reading it and returning it to KVM, and continue to hold the lock until + the attestation request is actually sent to firmware. To facilitate + this, the VMM can set the ``immediate_exit`` flag of kvm_run just after + supplying the certificate data, and just before resuming the vCPU. + This will ensure the vCPU will exit again to userspace with ``-EINTR`` + after it finishes fetching the attestation request from firmware, at + which point the VMM can safely drop the file lock. + + - Tools/libraries that perform updates to SNP firmware TCB values or + endorsement keys (e.g. via /dev/sev interfaces such as ``SNP_COMMIT``, + ``SNP_SET_CONFIG``, or ``SNP_VLEK_LOAD``, see + Documentation/virt/coco/sev-guest.rst for more details) in such a way + that the certificate blob needs to be updated, should similarly take an + exclusive lock on the certificate blob for the duration of any updates + to endorsement keys or the certificate blob contents to ensure that + VMMs using the above scheme will not return certificate blob data that + is out of sync with the endorsement key used by firmware at the time + the attestation request is actually issued. + +This scheme is recommended so that tools can use a fairly generic/natural +approach to synchronizing firmware/certificate updates via file-locking, +which should make it easier to maintain interoperability across +tools/VMMs/vendors. + +Device attribute API +==================== + +Attributes of the SEV implementation can be retrieved through the +``KVM_HAS_DEVICE_ATTR`` and ``KVM_GET_DEVICE_ATTR`` ioctls on the ``/dev/kvm`` +device node, using group ``KVM_X86_GRP_SEV``. + +The following attributes are currently implemented: + +* ``KVM_X86_SEV_VMSA_FEATURES``: return the set of all bits that + are accepted in the ``vmsa_features`` of ``KVM_SEV_INIT2``. + +* ``KVM_X86_SEV_SNP_REQ_CERTS``: return a value of 1 if the kernel supports the + ``KVM_EXIT_SNP_REQ_CERTS`` exit, which allows for fetching endorsement key + certificates from userspace for each SNP attestation request the guest issues. + +Firmware Management +=================== + +The SEV guest key management is handled by a separate processor called the AMD +Secure Processor (AMD-SP). Firmware running inside the AMD-SP provides a secure +key management interface to perform common hypervisor activities such as +encrypting bootstrap code, snapshot, migrating and debugging the guest. For more +information, see the SEV Key Management spec [api-spec]_ + +The AMD-SP firmware can be initialized either by using its own non-volatile +storage or the OS can manage the NV storage for the firmware using +parameter ``init_ex_path`` of the ``ccp`` module. If the file specified +by ``init_ex_path`` does not exist or is invalid, the OS will create or +override the file with PSP non-volatile storage. + +References +========== + + +See [white-paper]_, [api-spec]_, [amd-apm]_, [kvm-forum]_, and [snp-fw-abi]_ +for more info. + +.. [white-paper] https://docs.amd.com/v/u/en-US/memory-encryption-white-paper +.. [api-spec] https://docs.amd.com/v/u/en-US/55766_PUB_3.24_SEV_API +.. [amd-apm] https://docs.amd.com/v/u/en-US/24593_3.44_APM_Vol2 (section 15.34) +.. [kvm-forum] https://www.linux-kvm.org/images/7/74/02x08A-Thomas_Lendacky-AMDs_Virtualizatoin_Memory_Encryption_Technology.pdf +.. [snp-fw-abi] https://www.amd.com/content/dam/amd/en/documents/developer/56860.pdf diff --git a/Documentation/virt/kvm/x86/cpuid.rst b/Documentation/virt/kvm/x86/cpuid.rst new file mode 100644 index 000000000..bda3e3e73 --- /dev/null +++ b/Documentation/virt/kvm/x86/cpuid.rst @@ -0,0 +1,124 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============== +KVM CPUID bits +============== + +:Author: Glauber Costa <glommer@gmail.com> + +A guest running on a kvm host, can check some of its features using +cpuid. This is not always guaranteed to work, since userspace can +mask-out some, or even all KVM-related cpuid features before launching +a guest. + +KVM cpuid functions are: + +function: KVM_CPUID_SIGNATURE (0x40000000) + +returns:: + + eax = 0x40000001 + ebx = 0x4b4d564b + ecx = 0x564b4d56 + edx = 0x4d + +Note that this value in ebx, ecx and edx corresponds to the string "KVMKVMKVM". +The value in eax corresponds to the maximum cpuid function present in this leaf, +and will be updated if more functions are added in the future. +Note also that old hosts set eax value to 0x0. This should +be interpreted as if the value was 0x40000001. +This function queries the presence of KVM cpuid leafs. + +function: define KVM_CPUID_FEATURES (0x40000001) + +returns:: + + ebx, ecx + eax = an OR'ed group of (1 << flag) + +where ``flag`` is defined as below: + +================================== =========== ================================ +flag value meaning +================================== =========== ================================ +KVM_FEATURE_CLOCKSOURCE 0 kvmclock available at msrs + 0x11 and 0x12 + +KVM_FEATURE_NOP_IO_DELAY 1 not necessary to perform delays + on PIO operations + +KVM_FEATURE_MMU_OP 2 deprecated + +KVM_FEATURE_CLOCKSOURCE2 3 kvmclock available at msrs + 0x4b564d00 and 0x4b564d01 + +KVM_FEATURE_ASYNC_PF 4 async pf can be enabled by + writing to msr 0x4b564d02 + +KVM_FEATURE_STEAL_TIME 5 steal time can be enabled by + writing to msr 0x4b564d03 + +KVM_FEATURE_PV_EOI 6 paravirtualized end of interrupt + handler can be enabled by + writing to msr 0x4b564d04 + +KVM_FEATURE_PV_UNHALT 7 guest checks this feature bit + before enabling paravirtualized + spinlock support + +KVM_FEATURE_PV_TLB_FLUSH 9 guest checks this feature bit + before enabling paravirtualized + tlb flush + +KVM_FEATURE_ASYNC_PF_VMEXIT 10 paravirtualized async PF VM EXIT + can be enabled by setting bit 2 + when writing to msr 0x4b564d02 + +KVM_FEATURE_PV_SEND_IPI 11 guest checks this feature bit + before enabling paravirtualized + send IPIs + +KVM_FEATURE_POLL_CONTROL 12 host-side polling on HLT can + be disabled by writing + to msr 0x4b564d05. + +KVM_FEATURE_PV_SCHED_YIELD 13 guest checks this feature bit + before using paravirtualized + sched yield. + +KVM_FEATURE_ASYNC_PF_INT 14 guest checks this feature bit + before using the second async + pf control msr 0x4b564d06 and + async pf acknowledgment msr + 0x4b564d07. + +KVM_FEATURE_MSI_EXT_DEST_ID 15 guest checks this feature bit + before using extended destination + ID bits in MSI address bits 11-5. + +KVM_FEATURE_HC_MAP_GPA_RANGE 16 guest checks this feature bit before + using the map gpa range hypercall + to notify the page state change + +KVM_FEATURE_MIGRATION_CONTROL 17 guest checks this feature bit before + using MSR_KVM_MIGRATION_CONTROL + +KVM_FEATURE_CLOCKSOURCE_STABLE_BIT 24 host will warn if no guest-side + per-cpu warps are expected in + kvmclock +================================== =========== ================================ + +:: + + edx = an OR'ed group of (1 << flag) + +Where ``flag`` here is defined as below: + +================== ============ ================================= +flag value meaning +================== ============ ================================= +KVM_HINTS_REALTIME 0 guest checks this feature bit to + determine that vCPUs are never + preempted for an unlimited time + allowing optimizations +================== ============ ================================= diff --git a/Documentation/virt/kvm/x86/errata.rst b/Documentation/virt/kvm/x86/errata.rst new file mode 100644 index 000000000..a9cf0e004 --- /dev/null +++ b/Documentation/virt/kvm/x86/errata.rst @@ -0,0 +1,87 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================================= +Known limitations of CPU virtualization +======================================= + +Whenever perfect emulation of a CPU feature is impossible or too hard, KVM +has to choose between not implementing the feature at all or introducing +behavioral differences between virtual machines and bare metal systems. + +This file documents some of the known limitations that KVM has in +virtualizing CPU features. + +x86 +=== + +``KVM_GET_SUPPORTED_CPUID`` issues +---------------------------------- + +x87 features +~~~~~~~~~~~~ + +Unlike most other CPUID feature bits, CPUID[EAX=7,ECX=0]:EBX[6] +(FDP_EXCPTN_ONLY) and CPUID[EAX=7,ECX=0]:EBX]13] (ZERO_FCS_FDS) are +clear if the features are present and set if the features are not present. + +Clearing these bits in CPUID has no effect on the operation of the guest; +if these bits are set on hardware, the features will not be present on +any virtual machine that runs on that hardware. + +**Workaround:** It is recommended to always set these bits in guest CPUID. +Note however that any software (e.g ``WIN87EM.DLL``) expecting these features +to be present likely predates these CPUID feature bits, and therefore +doesn't know to check for them anyway. + +``KVM_SET_VCPU_EVENTS`` issue +----------------------------- + +Invalid KVM_SET_VCPU_EVENTS input with respect to error codes *may* result in +failed VM-Entry on Intel CPUs. Pre-CET Intel CPUs require that exception +injection through the VMCS correctly set the "error code valid" flag, e.g. +require the flag be set when injecting a #GP, clear when injecting a #UD, +clear when injecting a soft exception, etc. Intel CPUs that enumerate +IA32_VMX_BASIC[56] as '1' relax VMX's consistency checks, and AMD CPUs have no +restrictions whatsoever. KVM_SET_VCPU_EVENTS doesn't sanity check the vector +versus "has_error_code", i.e. KVM's ABI follows AMD behavior. + +Nested virtualization features +------------------------------ + +On AMD CPUs, when GIF is cleared, #DB exceptions or traps due to a breakpoint +register match are ignored and discarded by the CPU. The CPU relies on the VMM +to fully virtualize this behavior, even when vGIF is enabled for the guest +(i.e. vGIF=0 does not cause the CPU to drop #DBs when the guest is running). +KVM does not virtualize this behavior as the complexity is unjustified given +the rarity of the use case. One way to handle this would be for KVM to +intercept the #DB, temporarily disable the breakpoint, single-step over the +instruction, then re-enable the breakpoint. + +x2APIC +------ +When KVM_X2APIC_API_USE_32BIT_IDS is enabled, KVM activates a hack/quirk that +allows sending events to a single vCPU using its x2APIC ID even if the target +vCPU has legacy xAPIC enabled, e.g. to bring up hotplugged vCPUs via INIT-SIPI +on VMs with > 255 vCPUs. A side effect of the quirk is that, if multiple vCPUs +have the same physical APIC ID, KVM will deliver events targeting that APIC ID +only to the vCPU with the lowest vCPU ID. If KVM_X2APIC_API_USE_32BIT_IDS is +not enabled, KVM follows x86 architecture when processing interrupts (all vCPUs +matching the target APIC ID receive the interrupt). + +MTRRs +----- +KVM does not virtualize guest MTRR memory types. KVM emulates accesses to MTRR +MSRs, i.e. {RD,WR}MSR in the guest will behave as expected, but KVM does not +honor guest MTRRs when determining the effective memory type, and instead +treats all of guest memory as having Writeback (WB) MTRRs. + +CR0.CD +------ +KVM does not virtualize CR0.CD on Intel CPUs. Similar to MTRR MSRs, KVM +emulates CR0.CD accesses so that loads and stores from/to CR0 behave as +expected, but setting CR0.CD=1 has no impact on the cachaeability of guest +memory. + +Note, this erratum does not affect AMD CPUs, which fully virtualize CR0.CD in +hardware, i.e. put the CPU caches into "no fill" mode when CR0.CD=1, even when +running in the guest.
\ No newline at end of file diff --git a/Documentation/virt/kvm/x86/hypercalls.rst b/Documentation/virt/kvm/x86/hypercalls.rst new file mode 100644 index 000000000..521ecf9a8 --- /dev/null +++ b/Documentation/virt/kvm/x86/hypercalls.rst @@ -0,0 +1,192 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================== +Linux KVM Hypercall +=================== + +X86: + KVM Hypercalls have a three-byte sequence of either the vmcall or the vmmcall + instruction. The hypervisor can replace it with instructions that are + guaranteed to be supported. + + Up to four arguments may be passed in rbx, rcx, rdx, and rsi respectively. + The hypercall number should be placed in rax and the return value will be + placed in rax. No other registers will be clobbered unless explicitly stated + by the particular hypercall. + +S390: + R2-R7 are used for parameters 1-6. In addition, R1 is used for hypercall + number. The return value is written to R2. + + S390 uses diagnose instruction as hypercall (0x500) along with hypercall + number in R1. + + For further information on the S390 diagnose call as supported by KVM, + refer to Documentation/virt/kvm/s390/s390-diag.rst. + +PowerPC: + It uses R3-R10 and hypercall number in R11. R4-R11 are used as output registers. + Return value is placed in R3. + + KVM hypercalls uses 4 byte opcode, that are patched with 'hypercall-instructions' + property inside the device tree's /hypervisor node. + For more information refer to Documentation/virt/kvm/ppc-pv.rst + +MIPS: + KVM hypercalls use the HYPCALL instruction with code 0 and the hypercall + number in $2 (v0). Up to four arguments may be placed in $4-$7 (a0-a3) and + the return value is placed in $2 (v0). + +KVM Hypercalls Documentation +============================ + +The template for each hypercall is: +1. Hypercall name. +2. Architecture(s) +3. Status (deprecated, obsolete, active) +4. Purpose + +1. KVM_HC_VAPIC_POLL_IRQ +------------------------ + +:Architecture: x86 +:Status: active +:Purpose: Trigger guest exit so that the host can check for pending + interrupts on reentry. + +2. KVM_HC_MMU_OP +---------------- + +:Architecture: x86 +:Status: deprecated. +:Purpose: Support MMU operations such as writing to PTE, + flushing TLB, release PT. + +3. KVM_HC_FEATURES +------------------ + +:Architecture: PPC +:Status: active +:Purpose: Expose hypercall availability to the guest. On x86 platforms, cpuid + used to enumerate which hypercalls are available. On PPC, either + device tree based lookup ( which is also what EPAPR dictates) + OR KVM specific enumeration mechanism (which is this hypercall) + can be used. + +4. KVM_HC_PPC_MAP_MAGIC_PAGE +---------------------------- + +:Architecture: PPC +:Status: active +:Purpose: To enable communication between the hypervisor and guest there is a + shared page that contains parts of supervisor visible register state. + The guest can map this shared page to access its supervisor register + through memory using this hypercall. + +5. KVM_HC_KICK_CPU +------------------ + +:Architecture: x86 +:Status: active +:Purpose: Hypercall used to wakeup a vcpu from HLT state +:Usage example: + A vcpu of a paravirtualized guest that is busywaiting in guest + kernel mode for an event to occur (ex: a spinlock to become available) can + execute HLT instruction once it has busy-waited for more than a threshold + time-interval. Execution of HLT instruction would cause the hypervisor to put + the vcpu to sleep until occurrence of an appropriate event. Another vcpu of the + same guest can wakeup the sleeping vcpu by issuing KVM_HC_KICK_CPU hypercall, + specifying APIC ID (a1) of the vcpu to be woken up. An additional argument (a0) + is used in the hypercall for future use. + + +6. KVM_HC_CLOCK_PAIRING +----------------------- +:Architecture: x86 +:Status: active +:Purpose: Hypercall used to synchronize host and guest clocks. + +Usage: + +a0: guest physical address where host copies +"struct kvm_clock_offset" structure. + +a1: clock_type, ATM only KVM_CLOCK_PAIRING_WALLCLOCK (0) +is supported (corresponding to the host's CLOCK_REALTIME clock). + + :: + + struct kvm_clock_pairing { + __s64 sec; + __s64 nsec; + __u64 tsc; + __u32 flags; + __u32 pad[9]; + }; + + Where: + * sec: seconds from clock_type clock. + * nsec: nanoseconds from clock_type clock. + * tsc: guest TSC value used to calculate sec/nsec pair + * flags: flags, unused (0) at the moment. + +The hypercall lets a guest compute a precise timestamp across +host and guest. The guest can use the returned TSC value to +compute the CLOCK_REALTIME for its clock, at the same instant. + +Returns KVM_EOPNOTSUPP if the host does not use TSC clocksource, +or if clock type is different than KVM_CLOCK_PAIRING_WALLCLOCK. + +7. KVM_HC_SEND_IPI +------------------ + +:Architecture: x86 +:Status: active +:Purpose: Send IPIs to multiple vCPUs. + +- a0: lower part of the bitmap of destination APIC IDs +- a1: higher part of the bitmap of destination APIC IDs +- a2: the lowest APIC ID in bitmap +- a3: APIC ICR + +The hypercall lets a guest send multicast IPIs, with at most 128 +128 destinations per hypercall in 64-bit mode and 64 vCPUs per +hypercall in 32-bit mode. The destinations are represented by a +bitmap contained in the first two arguments (a0 and a1). Bit 0 of +a0 corresponds to the APIC ID in the third argument (a2), bit 1 +corresponds to the APIC ID a2+1, and so on. + +Returns the number of CPUs to which the IPIs were delivered successfully. + +8. KVM_HC_SCHED_YIELD +--------------------- + +:Architecture: x86 +:Status: active +:Purpose: Hypercall used to yield if the IPI target vCPU is preempted + +a0: destination APIC ID + +:Usage example: When sending a call-function IPI-many to vCPUs, yield if + any of the IPI target vCPUs was preempted. + +9. KVM_HC_MAP_GPA_RANGE +------------------------- +:Architecture: x86 +:Status: active +:Purpose: Request KVM to map a GPA range with the specified attributes. + +a0: the guest physical address of the start page +a1: the number of (4kb) pages (must be contiguous in GPA space) +a2: attributes + + Where 'attributes' : + * bits 3:0 - preferred page size encoding 0 = 4kb, 1 = 2mb, 2 = 1gb, etc... + * bit 4 - plaintext = 0, encrypted = 1 + * bits 63:5 - reserved (must be zero) + +**Implementation note**: this hypercall is implemented in userspace via +the KVM_CAP_EXIT_HYPERCALL capability. Userspace must enable that capability +before advertising KVM_FEATURE_HC_MAP_GPA_RANGE in the guest CPUID. In +addition, if the guest supports KVM_FEATURE_MIGRATION_CONTROL, userspace +must also set up an MSR filter to process writes to MSR_KVM_MIGRATION_CONTROL. diff --git a/Documentation/virt/kvm/x86/index.rst b/Documentation/virt/kvm/x86/index.rst new file mode 100644 index 000000000..851e99174 --- /dev/null +++ b/Documentation/virt/kvm/x86/index.rst @@ -0,0 +1,19 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================== +KVM for x86 systems +=================== + +.. toctree:: + :maxdepth: 2 + + amd-memory-encryption + cpuid + errata + hypercalls + intel-tdx + mmu + msr + nested-vmx + running-nested-guests + timekeeping diff --git a/Documentation/virt/kvm/x86/intel-tdx.rst b/Documentation/virt/kvm/x86/intel-tdx.rst new file mode 100644 index 000000000..6a222e9d0 --- /dev/null +++ b/Documentation/virt/kvm/x86/intel-tdx.rst @@ -0,0 +1,268 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================================== +Intel Trust Domain Extensions (TDX) +=================================== + +Overview +======== +Intel's Trust Domain Extensions (TDX) protect confidential guest VMs from the +host and physical attacks. A CPU-attested software module called 'the TDX +module' runs inside a new CPU isolated range to provide the functionalities to +manage and run protected VMs, a.k.a, TDX guests or TDs. + +Please refer to [1] for the whitepaper, specifications and other resources. + +This documentation describes TDX-specific KVM ABIs. The TDX module needs to be +initialized before it can be used by KVM to run any TDX guests. The host +core-kernel provides the support of initializing the TDX module, which is +described in the Documentation/arch/x86/tdx.rst. + +API description +=============== + +KVM_MEMORY_ENCRYPT_OP +--------------------- +:Type: vm ioctl, vcpu ioctl + +For TDX operations, KVM_MEMORY_ENCRYPT_OP is re-purposed to be generic +ioctl with TDX specific sub-ioctl() commands. + +:: + + /* Trust Domain Extensions sub-ioctl() commands. */ + enum kvm_tdx_cmd_id { + KVM_TDX_CAPABILITIES = 0, + KVM_TDX_INIT_VM, + KVM_TDX_INIT_VCPU, + KVM_TDX_INIT_MEM_REGION, + KVM_TDX_FINALIZE_VM, + KVM_TDX_GET_CPUID, + + KVM_TDX_CMD_NR_MAX, + }; + + struct kvm_tdx_cmd { + /* enum kvm_tdx_cmd_id */ + __u32 id; + /* flags for sub-command. If sub-command doesn't use this, set zero. */ + __u32 flags; + /* + * data for each sub-command. An immediate or a pointer to the actual + * data in process virtual address. If sub-command doesn't use it, + * set zero. + */ + __u64 data; + /* + * Auxiliary error code. The sub-command may return TDX SEAMCALL + * status code in addition to -Exxx. + */ + __u64 hw_error; + }; + +KVM_TDX_CAPABILITIES +-------------------- +:Type: vm ioctl +:Returns: 0 on success, <0 on error + +Return the TDX capabilities that current KVM supports with the specific TDX +module loaded in the system. It reports what features/capabilities are allowed +to be configured to the TDX guest. + +- id: KVM_TDX_CAPABILITIES +- flags: must be 0 +- data: pointer to struct kvm_tdx_capabilities +- hw_error: must be 0 + +:: + + struct kvm_tdx_capabilities { + __u64 supported_attrs; + __u64 supported_xfam; + + /* TDG.VP.VMCALL hypercalls executed in kernel and forwarded to + * userspace, respectively + */ + __u64 kernel_tdvmcallinfo_1_r11; + __u64 user_tdvmcallinfo_1_r11; + + /* TDG.VP.VMCALL instruction executions subfunctions executed in kernel + * and forwarded to userspace, respectively + */ + __u64 kernel_tdvmcallinfo_1_r12; + __u64 user_tdvmcallinfo_1_r12; + + __u64 reserved[250]; + + /* Configurable CPUID bits for userspace */ + struct kvm_cpuid2 cpuid; + }; + + +KVM_TDX_INIT_VM +--------------- +:Type: vm ioctl +:Returns: 0 on success, <0 on error + +Perform TDX specific VM initialization. This needs to be called after +KVM_CREATE_VM and before creating any VCPUs. + +- id: KVM_TDX_INIT_VM +- flags: must be 0 +- data: pointer to struct kvm_tdx_init_vm +- hw_error: must be 0 + +:: + + struct kvm_tdx_init_vm { + __u64 attributes; + __u64 xfam; + __u64 mrconfigid[6]; /* sha384 digest */ + __u64 mrowner[6]; /* sha384 digest */ + __u64 mrownerconfig[6]; /* sha384 digest */ + + /* The total space for TD_PARAMS before the CPUIDs is 256 bytes */ + __u64 reserved[12]; + + /* + * Call KVM_TDX_INIT_VM before vcpu creation, thus before + * KVM_SET_CPUID2. + * This configuration supersedes KVM_SET_CPUID2s for VCPUs because the + * TDX module directly virtualizes those CPUIDs without VMM. The user + * space VMM, e.g. qemu, should make KVM_SET_CPUID2 consistent with + * those values. If it doesn't, KVM may have wrong idea of vCPUIDs of + * the guest, and KVM may wrongly emulate CPUIDs or MSRs that the TDX + * module doesn't virtualize. + */ + struct kvm_cpuid2 cpuid; + }; + + +KVM_TDX_INIT_VCPU +----------------- +:Type: vcpu ioctl +:Returns: 0 on success, <0 on error + +Perform TDX specific VCPU initialization. + +- id: KVM_TDX_INIT_VCPU +- flags: must be 0 +- data: initial value of the guest TD VCPU RCX +- hw_error: must be 0 + +KVM_TDX_INIT_MEM_REGION +----------------------- +:Type: vcpu ioctl +:Returns: 0 on success, <0 on error + +Initialize @nr_pages TDX guest private memory starting from @gpa with userspace +provided data from @source_addr. @source_addr must be PAGE_SIZE-aligned. + +Note, before calling this sub command, memory attribute of the range +[gpa, gpa + nr_pages] needs to be private. Userspace can use +KVM_SET_MEMORY_ATTRIBUTES to set the attribute. + +If KVM_TDX_MEASURE_MEMORY_REGION flag is specified, it also extends measurement. + +- id: KVM_TDX_INIT_MEM_REGION +- flags: currently only KVM_TDX_MEASURE_MEMORY_REGION is defined +- data: pointer to struct kvm_tdx_init_mem_region +- hw_error: must be 0 + +:: + + #define KVM_TDX_MEASURE_MEMORY_REGION (1UL << 0) + + struct kvm_tdx_init_mem_region { + __u64 source_addr; + __u64 gpa; + __u64 nr_pages; + }; + + +KVM_TDX_FINALIZE_VM +------------------- +:Type: vm ioctl +:Returns: 0 on success, <0 on error + +Complete measurement of the initial TD contents and mark it ready to run. + +- id: KVM_TDX_FINALIZE_VM +- flags: must be 0 +- data: must be 0 +- hw_error: must be 0 + + +KVM_TDX_GET_CPUID +----------------- +:Type: vcpu ioctl +:Returns: 0 on success, <0 on error + +Get the CPUID values that the TDX module virtualizes for the TD guest. +When it returns -E2BIG, the user space should allocate a larger buffer and +retry. The minimum buffer size is updated in the nent field of the +struct kvm_cpuid2. + +- id: KVM_TDX_GET_CPUID +- flags: must be 0 +- data: pointer to struct kvm_cpuid2 (in/out) +- hw_error: must be 0 (out) + +:: + + struct kvm_cpuid2 { + __u32 nent; + __u32 padding; + struct kvm_cpuid_entry2 entries[0]; + }; + + struct kvm_cpuid_entry2 { + __u32 function; + __u32 index; + __u32 flags; + __u32 eax; + __u32 ebx; + __u32 ecx; + __u32 edx; + __u32 padding[3]; + }; + +KVM TDX creation flow +===================== +In addition to the standard KVM flow, new TDX ioctls need to be called. The +control flow is as follows: + +#. Check system wide capability + + * KVM_CAP_VM_TYPES: Check if VM type is supported and if KVM_X86_TDX_VM + is supported. + +#. Create VM + + * KVM_CREATE_VM + * KVM_TDX_CAPABILITIES: Query TDX capabilities for creating TDX guests. + * KVM_CHECK_EXTENSION(KVM_CAP_MAX_VCPUS): Query maximum VCPUs the TD can + support at VM level (TDX has its own limitation on this). + * KVM_SET_TSC_KHZ: Configure TD's TSC frequency if a different TSC frequency + than host is desired. This is Optional. + * KVM_TDX_INIT_VM: Pass TDX specific VM parameters. + +#. Create VCPU + + * KVM_CREATE_VCPU + * KVM_TDX_INIT_VCPU: Pass TDX specific VCPU parameters. + * KVM_SET_CPUID2: Configure TD's CPUIDs. + * KVM_SET_MSRS: Configure TD's MSRs. + +#. Initialize initial guest memory + + * Prepare content of initial guest memory. + * KVM_TDX_INIT_MEM_REGION: Add initial guest memory. + * KVM_TDX_FINALIZE_VM: Finalize the measurement of the TDX guest. + +#. Run VCPU + +References +========== + +https://www.intel.com/content/www/us/en/developer/tools/trust-domain-extensions/documentation.html diff --git a/Documentation/virt/kvm/x86/mmu.rst b/Documentation/virt/kvm/x86/mmu.rst new file mode 100644 index 000000000..666aa1796 --- /dev/null +++ b/Documentation/virt/kvm/x86/mmu.rst @@ -0,0 +1,507 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================== +The x86 kvm shadow mmu +====================== + +The mmu (in arch/x86/kvm, files mmu.[ch] and paging_tmpl.h) is responsible +for presenting a standard x86 mmu to the guest, while translating guest +physical addresses to host physical addresses. + +The mmu code attempts to satisfy the following requirements: + +- correctness: + the guest should not be able to determine that it is running + on an emulated mmu except for timing (we attempt to comply + with the specification, not emulate the characteristics of + a particular implementation such as tlb size) +- security: + the guest must not be able to touch host memory not assigned + to it +- performance: + minimize the performance penalty imposed by the mmu +- scaling: + need to scale to large memory and large vcpu guests +- hardware: + support the full range of x86 virtualization hardware +- integration: + Linux memory management code must be in control of guest memory + so that swapping, page migration, page merging, transparent + hugepages, and similar features work without change +- dirty tracking: + report writes to guest memory to enable live migration + and framebuffer-based displays +- footprint: + keep the amount of pinned kernel memory low (most memory + should be shrinkable) +- reliability: + avoid multipage or GFP_ATOMIC allocations + +Acronyms +======== + +==== ==================================================================== +pfn host page frame number +hpa host physical address +hva host virtual address +gfn guest frame number +gpa guest physical address +gva guest virtual address +ngpa nested guest physical address +ngva nested guest virtual address +pte page table entry (used also to refer generically to paging structure + entries) +gpte guest pte (referring to gfns) +spte shadow pte (referring to pfns) +tdp two dimensional paging (vendor neutral term for NPT and EPT) +==== ==================================================================== + +Virtual and real hardware supported +=================================== + +The mmu supports first-generation mmu hardware, which allows an atomic switch +of the current paging mode and cr3 during guest entry, as well as +two-dimensional paging (AMD's NPT and Intel's EPT). The emulated hardware +it exposes is the traditional 2/3/4 level x86 mmu, with support for global +pages, pae, pse, pse36, cr0.wp, and 1GB pages. Emulated hardware also +able to expose NPT capable hardware on NPT capable hosts. + +Translation +=========== + +The primary job of the mmu is to program the processor's mmu to translate +addresses for the guest. Different translations are required at different +times: + +- when guest paging is disabled, we translate guest physical addresses to + host physical addresses (gpa->hpa) +- when guest paging is enabled, we translate guest virtual addresses, to + guest physical addresses, to host physical addresses (gva->gpa->hpa) +- when the guest launches a guest of its own, we translate nested guest + virtual addresses, to nested guest physical addresses, to guest physical + addresses, to host physical addresses (ngva->ngpa->gpa->hpa) + +The primary challenge is to encode between 1 and 3 translations into hardware +that support only 1 (traditional) and 2 (tdp) translations. When the +number of required translations matches the hardware, the mmu operates in +direct mode; otherwise it operates in shadow mode (see below). + +Memory +====== + +Guest memory (gpa) is part of the user address space of the process that is +using kvm. Userspace defines the translation between guest addresses and user +addresses (gpa->hva); note that two gpas may alias to the same hva, but not +vice versa. + +These hvas may be backed using any method available to the host: anonymous +memory, file backed memory, and device memory. Memory might be paged by the +host at any time. + +Events +====== + +The mmu is driven by events, some from the guest, some from the host. + +Guest generated events: + +- writes to control registers (especially cr3) +- invlpg/invlpga instruction execution +- access to missing or protected translations + +Host generated events: + +- changes in the gpa->hpa translation (either through gpa->hva changes or + through hva->hpa changes) +- memory pressure (the shrinker) + +Shadow pages +============ + +The principal data structure is the shadow page, 'struct kvm_mmu_page'. A +shadow page contains 512 sptes, which can be either leaf or nonleaf sptes. A +shadow page may contain a mix of leaf and nonleaf sptes. + +A nonleaf spte allows the hardware mmu to reach the leaf pages and +is not related to a translation directly. It points to other shadow pages. + +A leaf spte corresponds to either one or two translations encoded into +one paging structure entry. These are always the lowest level of the +translation stack, with optional higher level translations left to NPT/EPT. +Leaf ptes point at guest pages. + +The following table shows translations encoded by leaf ptes, with higher-level +translations in parentheses: + + Non-nested guests:: + + nonpaging: gpa->hpa + paging: gva->gpa->hpa + paging, tdp: (gva->)gpa->hpa + + Nested guests:: + + non-tdp: ngva->gpa->hpa (*) + tdp: (ngva->)ngpa->gpa->hpa + + (*) the guest hypervisor will encode the ngva->gpa translation into its page + tables if npt is not present + +Shadow pages contain the following information: + role.level: + The level in the shadow paging hierarchy that this shadow page belongs to. + 1=4k sptes, 2=2M sptes, 3=1G sptes, etc. + role.direct: + If set, leaf sptes reachable from this page are for a linear range. + Examples include real mode translation, large guest pages backed by small + host pages, and gpa->hpa translations when NPT or EPT is active. + The linear range starts at (gfn << PAGE_SHIFT) and its size is determined + by role.level (2MB for first level, 1GB for second level, 0.5TB for third + level, 256TB for fourth level) + If clear, this page corresponds to a guest page table denoted by the gfn + field. + role.quadrant: + When role.has_4_byte_gpte=1, the guest uses 32-bit gptes while the host uses 64-bit + sptes. That means a guest page table contains more ptes than the host, + so multiple shadow pages are needed to shadow one guest page. + For first-level shadow pages, role.quadrant can be 0 or 1 and denotes the + first or second 512-gpte block in the guest page table. For second-level + page tables, each 32-bit gpte is converted to two 64-bit sptes + (since each first-level guest page is shadowed by two first-level + shadow pages) so role.quadrant takes values in the range 0..3. Each + quadrant maps 1GB virtual address space. + role.access: + Inherited guest access permissions from the parent ptes in the form uwx. + Note execute permission is positive, not negative. + role.invalid: + The page is invalid and should not be used. It is a root page that is + currently pinned (by a cpu hardware register pointing to it); once it is + unpinned it will be destroyed. + role.has_4_byte_gpte: + Reflects the size of the guest PTE for which the page is valid, i.e. '0' + if direct map or 64-bit gptes are in use, '1' if 32-bit gptes are in use. + role.efer_nx: + Contains the value of efer.nx for which the page is valid. + role.cr0_wp: + Contains the value of cr0.wp for which the page is valid. + role.cr4_smep: + Contains the value of cr4.smep for which the page is valid. + role.smap_andnot_wp: + Contains the value of cr4.smap && !cr0.wp for which the page is valid + (pages for which this is true are different from other pages; see the + treatment of cr0.wp=0 below). + role.smm: + Is 1 if the page is valid in system management mode. This field + determines which of the kvm_memslots array was used to build this + shadow page; it is also used to go back from a struct kvm_mmu_page + to a memslot, through the kvm_memslots_for_spte_role macro and + __gfn_to_memslot. + role.ad_disabled: + Is 1 if the MMU instance cannot use A/D bits. EPT did not have A/D + bits before Haswell; shadow EPT page tables also cannot use A/D bits + if the L1 hypervisor does not enable them. + role.guest_mode: + Indicates the shadow page is created for a nested guest. + role.passthrough: + The page is not backed by a guest page table, but its first entry + points to one. This is set if NPT uses 5-level page tables (host + CR4.LA57=1) and is shadowing L1's 4-level NPT (L1 CR4.LA57=0). + mmu_valid_gen: + The MMU generation of this page, used to fast zap of all MMU pages within a + VM without blocking vCPUs too long. Specifically, KVM updates the per-VM + valid MMU generation which causes the mismatch of mmu_valid_gen for each mmu + page. This makes all existing MMU pages obsolete. Obsolete pages can't be + used. Therefore, vCPUs must load a new, valid root before re-entering the + guest. The MMU generation is only ever '0' or '1'. Note, the TDP MMU doesn't + use this field as non-root TDP MMU pages are reachable only from their + owning root. Thus it suffices for TDP MMU to use role.invalid in root pages + to invalidate all MMU pages. + gfn: + Either the guest page table containing the translations shadowed by this + page, or the base page frame for linear translations. See role.direct. + spt: + A pageful of 64-bit sptes containing the translations for this page. + Accessed by both kvm and hardware. + The page pointed to by spt will have its page->private pointing back + at the shadow page structure. + sptes in spt point either at guest pages, or at lower-level shadow pages. + Specifically, if sp1 and sp2 are shadow pages, then sp1->spt[n] may point + at __pa(sp2->spt). sp2 will point back at sp1 through parent_pte. + The spt array forms a DAG structure with the shadow page as a node, and + guest pages as leaves. + shadowed_translation: + An array of 512 shadow translation entries, one for each present pte. Used + to perform a reverse map from a pte to a gfn as well as its access + permission. When role.direct is set, the shadow_translation array is not + allocated. This is because the gfn contained in any element of this array + can be calculated from the gfn field when used. In addition, when + role.direct is set, KVM does not track access permission for each of the + gfn. See role.direct and gfn. + root_count / tdp_mmu_root_count: + root_count is a reference counter for root shadow pages in Shadow MMU. + vCPUs elevate the refcount when getting a shadow page that will be used as + a root page, i.e. page that will be loaded into hardware directly (CR3, + PDPTRs, nCR3 EPTP). Root pages cannot be destroyed while their refcount is + non-zero. See role.invalid. tdp_mmu_root_count is similar but exclusively + used in TDP MMU as an atomic refcount. + parent_ptes: + The reverse mapping for the pte/ptes pointing at this page's spt. If + parent_ptes bit 0 is zero, only one spte points at this page and + parent_ptes points at this single spte, otherwise, there exists multiple + sptes pointing at this page and (parent_ptes & ~0x1) points at a data + structure with a list of parent sptes. + ptep: + The kernel virtual address of the SPTE that points at this shadow page. + Used exclusively by the TDP MMU, this field is a union with parent_ptes. + unsync: + If true, then the translations in this page may not match the guest's + translation. This is equivalent to the state of the tlb when a pte is + changed but before the tlb entry is flushed. Accordingly, unsync ptes + are synchronized when the guest executes invlpg or flushes its tlb by + other means. Valid for leaf pages. + unsync_children: + How many sptes in the page point at pages that are unsync (or have + unsynchronized children). + unsync_child_bitmap: + A bitmap indicating which sptes in spt point (directly or indirectly) at + pages that may be unsynchronized. Used to quickly locate all unsynchronized + pages reachable from a given page. + clear_spte_count: + Only present on 32-bit hosts, where a 64-bit spte cannot be written + atomically. The reader uses this while running out of the MMU lock + to detect in-progress updates and retry them until the writer has + finished the write. + write_flooding_count: + A guest may write to a page table many times, causing a lot of + emulations if the page needs to be write-protected (see "Synchronized + and unsynchronized pages" below). Leaf pages can be unsynchronized + so that they do not trigger frequent emulation, but this is not + possible for non-leafs. This field counts the number of emulations + since the last time the page table was actually used; if emulation + is triggered too frequently on this page, KVM will unmap the page + to avoid emulation in the future. + tdp_mmu_page: + Is 1 if the shadow page is a TDP MMU page. This variable is used to + bifurcate the control flows for KVM when walking any data structure that + may contain pages from both TDP MMU and shadow MMU. + +Reverse map +=========== + +The mmu maintains a reverse mapping whereby all ptes mapping a page can be +reached given its gfn. This is used, for example, when swapping out a page. + +Synchronized and unsynchronized pages +===================================== + +The guest uses two events to synchronize its tlb and page tables: tlb flushes +and page invalidations (invlpg). + +A tlb flush means that we need to synchronize all sptes reachable from the +guest's cr3. This is expensive, so we keep all guest page tables write +protected, and synchronize sptes to gptes when a gpte is written. + +A special case is when a guest page table is reachable from the current +guest cr3. In this case, the guest is obliged to issue an invlpg instruction +before using the translation. We take advantage of that by removing write +protection from the guest page, and allowing the guest to modify it freely. +We synchronize modified gptes when the guest invokes invlpg. This reduces +the amount of emulation we have to do when the guest modifies multiple gptes, +or when the a guest page is no longer used as a page table and is used for +random guest data. + +As a side effect we have to resynchronize all reachable unsynchronized shadow +pages on a tlb flush. + + +Reaction to events +================== + +- guest page fault (or npt page fault, or ept violation) + +This is the most complicated event. The cause of a page fault can be: + + - a true guest fault (the guest translation won't allow the access) (*) + - access to a missing translation + - access to a protected translation + - when logging dirty pages, memory is write protected + - synchronized shadow pages are write protected (*) + - access to untranslatable memory (mmio) + + (*) not applicable in direct mode + +Handling a page fault is performed as follows: + + - if the RSV bit of the error code is set, the page fault is caused by guest + accessing MMIO and cached MMIO information is available. + + - walk shadow page table + - check for valid generation number in the spte (see "Fast invalidation of + MMIO sptes" below) + - cache the information to vcpu->arch.mmio_gva, vcpu->arch.mmio_access and + vcpu->arch.mmio_gfn, and call the emulator + + - If both P bit and R/W bit of error code are set, this could possibly + be handled as a "fast page fault" (fixed without taking the MMU lock). See + the description in Documentation/virt/kvm/locking.rst. + + - if needed, walk the guest page tables to determine the guest translation + (gva->gpa or ngpa->gpa) + + - if permissions are insufficient, reflect the fault back to the guest + + - determine the host page + + - if this is an mmio request, there is no host page; cache the info to + vcpu->arch.mmio_gva, vcpu->arch.mmio_access and vcpu->arch.mmio_gfn + + - walk the shadow page table to find the spte for the translation, + instantiating missing intermediate page tables as necessary + + - If this is an mmio request, cache the mmio info to the spte and set some + reserved bit on the spte (see callers of kvm_mmu_set_mmio_spte_mask) + + - try to unsynchronize the page + + - if successful, we can let the guest continue and modify the gpte + + - emulate the instruction + + - if failed, unshadow the page and let the guest continue + + - update any translations that were modified by the instruction + +invlpg handling: + + - walk the shadow page hierarchy and drop affected translations + - try to reinstantiate the indicated translation in the hope that the + guest will use it in the near future + +Guest control register updates: + +- mov to cr3 + + - look up new shadow roots + - synchronize newly reachable shadow pages + +- mov to cr0/cr4/efer + + - set up mmu context for new paging mode + - look up new shadow roots + - synchronize newly reachable shadow pages + +Host translation updates: + + - mmu notifier called with updated hva + - look up affected sptes through reverse map + - drop (or update) translations + +Emulating cr0.wp +================ + +If tdp is not enabled, the host must keep cr0.wp=1 so page write protection +works for the guest kernel, not guest userspace. When the guest +cr0.wp=1, this does not present a problem. However when the guest cr0.wp=0, +we cannot map the permissions for gpte.u=1, gpte.w=0 to any spte (the +semantics require allowing any guest kernel access plus user read access). + +We handle this by mapping the permissions to two possible sptes, depending +on fault type: + +- kernel write fault: spte.u=0, spte.w=1 (allows full kernel access, + disallows user access) +- read fault: spte.u=1, spte.w=0 (allows full read access, disallows kernel + write access) + +(user write faults generate a #PF) + +In the first case there are two additional complications: + +- if CR4.SMEP is enabled: since we've turned the page into a kernel page, + the kernel may now execute it. We handle this by also setting spte.nx. + If we get a user fetch or read fault, we'll change spte.u=1 and + spte.nx=gpte.nx back. For this to work, KVM forces EFER.NX to 1 when + shadow paging is in use. +- if CR4.SMAP is disabled: since the page has been changed to a kernel + page, it can not be reused when CR4.SMAP is enabled. We set + CR4.SMAP && !CR0.WP into shadow page's role to avoid this case. Note, + here we do not care the case that CR4.SMAP is enabled since KVM will + directly inject #PF to guest due to failed permission check. + +To prevent an spte that was converted into a kernel page with cr0.wp=0 +from being written by the kernel after cr0.wp has changed to 1, we make +the value of cr0.wp part of the page role. This means that an spte created +with one value of cr0.wp cannot be used when cr0.wp has a different value - +it will simply be missed by the shadow page lookup code. A similar issue +exists when an spte created with cr0.wp=0 and cr4.smap=0 is used after +changing cr4.smap to 1. To avoid this, the value of !cr0.wp && cr4.smap +is also made a part of the page role. + +Large pages +=========== + +The mmu supports all combinations of large and small guest and host pages. +Supported page sizes include 4k, 2M, 4M, and 1G. 4M pages are treated as +two separate 2M pages, on both guest and host, since the mmu always uses PAE +paging. + +To instantiate a large spte, four constraints must be satisfied: + +- the spte must point to a large host page +- the guest pte must be a large pte of at least equivalent size (if tdp is + enabled, there is no guest pte and this condition is satisfied) +- if the spte will be writeable, the large page frame may not overlap any + write-protected pages +- the guest page must be wholly contained by a single memory slot + +To check the last two conditions, the mmu maintains a ->disallow_lpage set of +arrays for each memory slot and large page size. Every write protected page +causes its disallow_lpage to be incremented, thus preventing instantiation of +a large spte. The frames at the end of an unaligned memory slot have +artificially inflated ->disallow_lpages so they can never be instantiated. + +Fast invalidation of MMIO sptes +=============================== + +As mentioned in "Reaction to events" above, kvm will cache MMIO +information in leaf sptes. When a new memslot is added or an existing +memslot is changed, this information may become stale and needs to be +invalidated. This also needs to hold the MMU lock while walking all +shadow pages, and is made more scalable with a similar technique. + +MMIO sptes have a few spare bits, which are used to store a +generation number. The global generation number is stored in +kvm_memslots(kvm)->generation, and increased whenever guest memory info +changes. + +When KVM finds an MMIO spte, it checks the generation number of the spte. +If the generation number of the spte does not equal the global generation +number, it will ignore the cached MMIO information and handle the page +fault through the slow path. + +Since only 18 bits are used to store generation-number on mmio spte, all +pages are zapped when there is an overflow. + +Unfortunately, a single memory access might access kvm_memslots(kvm) multiple +times, the last one happening when the generation number is retrieved and +stored into the MMIO spte. Thus, the MMIO spte might be created based on +out-of-date information, but with an up-to-date generation number. + +To avoid this, the generation number is incremented again after synchronize_srcu +returns; thus, bit 63 of kvm_memslots(kvm)->generation set to 1 only during a +memslot update, while some SRCU readers might be using the old copy. We do not +want to use an MMIO sptes created with an odd generation number, and we can do +this without losing a bit in the MMIO spte. The "update in-progress" bit of the +generation is not stored in MMIO spte, and is so is implicitly zero when the +generation is extracted out of the spte. If KVM is unlucky and creates an MMIO +spte while an update is in-progress, the next access to the spte will always be +a cache miss. For example, a subsequent access during the update window will +miss due to the in-progress flag diverging, while an access after the update +window closes will have a higher generation number (as compared to the spte). + + +Further reading +=============== + +- NPT presentation from KVM Forum 2008 + https://www.linux-kvm.org/images/c/c8/KvmForum2008%24kdf2008_21.pdf diff --git a/Documentation/virt/kvm/x86/msr.rst b/Documentation/virt/kvm/x86/msr.rst new file mode 100644 index 000000000..3aecf2a70 --- /dev/null +++ b/Documentation/virt/kvm/x86/msr.rst @@ -0,0 +1,390 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================= +KVM-specific MSRs +================= + +:Author: Glauber Costa <glommer@redhat.com>, Red Hat Inc, 2010 + +KVM makes use of some custom MSRs to service some requests. + +Custom MSRs have a range reserved for them, that goes from +0x4b564d00 to 0x4b564dff. There are MSRs outside this area, +but they are deprecated and their use is discouraged. + +Custom MSR list +--------------- + +The current supported Custom MSR list is: + +MSR_KVM_WALL_CLOCK_NEW: + 0x4b564d00 + +data: + 4-byte alignment physical address of a memory area which must be + in guest RAM. This memory is expected to hold a copy of the following + structure:: + + struct pvclock_wall_clock { + u32 version; + u32 sec; + u32 nsec; + } __attribute__((__packed__)); + + whose data will be filled in by the hypervisor. The hypervisor is only + guaranteed to update this data at the moment of MSR write. + Users that want to reliably query this information more than once have + to write more than once to this MSR. Fields have the following meanings: + + version: + guest has to check version before and after grabbing + time information and check that they are both equal and even. + An odd version indicates an in-progress update. + + sec: + number of seconds for wallclock at time of boot. + + nsec: + number of nanoseconds for wallclock at time of boot. + + In order to get the current wallclock time, the system_time from + MSR_KVM_SYSTEM_TIME_NEW needs to be added. + + Note that although MSRs are per-CPU entities, the effect of this + particular MSR is global. + + Availability of this MSR must be checked via bit 3 in 0x4000001 cpuid + leaf prior to usage. + +MSR_KVM_SYSTEM_TIME_NEW: + 0x4b564d01 + +data: + 4-byte aligned physical address of a memory area which must be in + guest RAM, plus an enable bit in bit 0. This memory is expected to hold + a copy of the following structure:: + + struct pvclock_vcpu_time_info { + u32 version; + u32 pad0; + u64 tsc_timestamp; + u64 system_time; + u32 tsc_to_system_mul; + s8 tsc_shift; + u8 flags; + u8 pad[2]; + } __attribute__((__packed__)); /* 32 bytes */ + + whose data will be filled in by the hypervisor periodically. Only one + write, or registration, is needed for each VCPU. The interval between + updates of this structure is arbitrary and implementation-dependent. + The hypervisor may update this structure at any time it sees fit until + anything with bit0 == 0 is written to it. + + Fields have the following meanings: + + version: + guest has to check version before and after grabbing + time information and check that they are both equal and even. + An odd version indicates an in-progress update. + + tsc_timestamp: + the tsc value at the current VCPU at the time + of the update of this structure. Guests can subtract this value + from current tsc to derive a notion of elapsed time since the + structure update. + + system_time: + a host notion of monotonic time, including sleep + time at the time this structure was last updated. Unit is + nanoseconds. + + tsc_to_system_mul: + multiplier to be used when converting + tsc-related quantity to nanoseconds + + tsc_shift: + shift to be used when converting tsc-related + quantity to nanoseconds. This shift will ensure that + multiplication with tsc_to_system_mul does not overflow. + A positive value denotes a left shift, a negative value + a right shift. + + The conversion from tsc to nanoseconds involves an additional + right shift by 32 bits. With this information, guests can + derive per-CPU time by doing:: + + time = (current_tsc - tsc_timestamp) + if (tsc_shift >= 0) + time <<= tsc_shift; + else + time >>= -tsc_shift; + time = (time * tsc_to_system_mul) >> 32 + time = time + system_time + + flags: + bits in this field indicate extended capabilities + coordinated between the guest and the hypervisor. Availability + of specific flags has to be checked in 0x40000001 cpuid leaf. + Current flags are: + + + +-----------+--------------+----------------------------------+ + | flag bit | cpuid bit | meaning | + +-----------+--------------+----------------------------------+ + | | | time measures taken across | + | 0 | 24 | multiple cpus are guaranteed to | + | | | be monotonic | + +-----------+--------------+----------------------------------+ + | | | guest vcpu has been paused by | + | 1 | N/A | the host | + | | | See 4.70 in api.txt | + +-----------+--------------+----------------------------------+ + + Availability of this MSR must be checked via bit 3 in 0x4000001 cpuid + leaf prior to usage. + + +MSR_KVM_WALL_CLOCK: + 0x11 + +data and functioning: + same as MSR_KVM_WALL_CLOCK_NEW. Use that instead. + + This MSR falls outside the reserved KVM range and may be removed in the + future. Its usage is deprecated. + + Availability of this MSR must be checked via bit 0 in 0x4000001 cpuid + leaf prior to usage. + +MSR_KVM_SYSTEM_TIME: + 0x12 + +data and functioning: + same as MSR_KVM_SYSTEM_TIME_NEW. Use that instead. + + This MSR falls outside the reserved KVM range and may be removed in the + future. Its usage is deprecated. + + Availability of this MSR must be checked via bit 0 in 0x4000001 cpuid + leaf prior to usage. + + The suggested algorithm for detecting kvmclock presence is then:: + + if (!kvm_para_available()) /* refer to cpuid.txt */ + return NON_PRESENT; + + flags = cpuid_eax(0x40000001); + if (flags & 3) { + msr_kvm_system_time = MSR_KVM_SYSTEM_TIME_NEW; + msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK_NEW; + return PRESENT; + } else if (flags & 0) { + msr_kvm_system_time = MSR_KVM_SYSTEM_TIME; + msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK; + return PRESENT; + } else + return NON_PRESENT; + +MSR_KVM_ASYNC_PF_EN: + 0x4b564d02 + +data: + Asynchronous page fault (APF) control MSR. + + Bits 63-6 hold 64-byte aligned physical address of a 64 byte memory area + which must be in guest RAM. This memory is expected to hold the + following structure:: + + struct kvm_vcpu_pv_apf_data { + /* Used for 'page not present' events delivered via #PF */ + __u32 flags; + + /* Used for 'page ready' events delivered via interrupt notification */ + __u32 token; + + __u8 pad[56]; + }; + + Bits 5-4 of the MSR are reserved and should be zero. Bit 0 is set to 1 + when asynchronous page faults are enabled on the vcpu, 0 when disabled. + Bit 1 is 1 if asynchronous page faults can be injected when vcpu is in + cpl == 0. Bit 2 is 1 if asynchronous page faults are delivered to L1 as + #PF vmexits. Bit 2 can be set only if KVM_FEATURE_ASYNC_PF_VMEXIT is + present in CPUID. Bit 3 enables interrupt based delivery of 'page ready' + events. Bit 3 can only be set if KVM_FEATURE_ASYNC_PF_INT is present in + CPUID. + + 'Page not present' events are currently always delivered as synthetic + #PF exception. During delivery of these events APF CR2 register contains + a token that will be used to notify the guest when missing page becomes + available. Also, to make it possible to distinguish between real #PF and + APF, first 4 bytes of 64 byte memory location ('flags') will be written + to by the hypervisor at the time of injection. Only first bit of 'flags' + is currently supported, when set, it indicates that the guest is dealing + with asynchronous 'page not present' event. If during a page fault APF + 'flags' is '0' it means that this is regular page fault. Guest is + supposed to clear 'flags' when it is done handling #PF exception so the + next event can be delivered. + + Note, since APF 'page not present' events use the same exception vector + as regular page fault, guest must reset 'flags' to '0' before it does + something that can generate normal page fault. + + Bytes 4-7 of 64 byte memory location ('token') will be written to by the + hypervisor at the time of APF 'page ready' event injection. The content + of these bytes is a token which was previously delivered in CR2 as + 'page not present' event. The event indicates the page is now available. + Guest is supposed to write '0' to 'token' when it is done handling + 'page ready' event and to write '1' to MSR_KVM_ASYNC_PF_ACK after + clearing the location; writing to the MSR forces KVM to re-scan its + queue and deliver the next pending notification. + + Note, MSR_KVM_ASYNC_PF_INT MSR specifying the interrupt vector for 'page + ready' APF delivery needs to be written to before enabling APF mechanism + in MSR_KVM_ASYNC_PF_EN or interrupt #0 can get injected. The MSR is + available if KVM_FEATURE_ASYNC_PF_INT is present in CPUID. + + Note, previously, 'page ready' events were delivered via the same #PF + exception as 'page not present' events but this is now deprecated. If + bit 3 (interrupt based delivery) is not set APF events are not delivered. + + If APF is disabled while there are outstanding APFs, they will + not be delivered. + + Currently 'page ready' APF events will be always delivered on the + same vcpu as 'page not present' event was, but guest should not rely on + that. + +MSR_KVM_STEAL_TIME: + 0x4b564d03 + +data: + 64-byte alignment physical address of a memory area which must be + in guest RAM, plus an enable bit in bit 0. This memory is expected to + hold a copy of the following structure:: + + struct kvm_steal_time { + __u64 steal; + __u32 version; + __u32 flags; + __u8 preempted; + __u8 u8_pad[3]; + __u32 pad[11]; + } + + whose data will be filled in by the hypervisor periodically. Only one + write, or registration, is needed for each VCPU. The interval between + updates of this structure is arbitrary and implementation-dependent. + The hypervisor may update this structure at any time it sees fit until + anything with bit0 == 0 is written to it. Guest is required to make sure + this structure is initialized to zero. + + Fields have the following meanings: + + version: + a sequence counter. In other words, guest has to check + this field before and after grabbing time information and make + sure they are both equal and even. An odd version indicates an + in-progress update. + + flags: + At this point, always zero. May be used to indicate + changes in this structure in the future. + + steal: + the amount of time in which this vCPU did not run, in + nanoseconds. Time during which the vcpu is idle, will not be + reported as steal time. + + preempted: + indicate the vCPU who owns this struct is running or + not. Non-zero values mean the vCPU has been preempted. Zero + means the vCPU is not preempted. NOTE, it is always zero if the + the hypervisor doesn't support this field. + +MSR_KVM_EOI_EN: + 0x4b564d04 + +data: + Bit 0 is 1 when PV end of interrupt is enabled on the vcpu; 0 + when disabled. Bit 1 is reserved and must be zero. When PV end of + interrupt is enabled (bit 0 set), bits 63-2 hold a 4-byte aligned + physical address of a 4 byte memory area which must be in guest RAM and + must be zeroed. + + The first, least significant bit of 4 byte memory location will be + written to by the hypervisor, typically at the time of interrupt + injection. Value of 1 means that guest can skip writing EOI to the apic + (using MSR or MMIO write); instead, it is sufficient to signal + EOI by clearing the bit in guest memory - this location will + later be polled by the hypervisor. + Value of 0 means that the EOI write is required. + + It is always safe for the guest to ignore the optimization and perform + the APIC EOI write anyway. + + Hypervisor is guaranteed to only modify this least + significant bit while in the current VCPU context, this means that + guest does not need to use either lock prefix or memory ordering + primitives to synchronise with the hypervisor. + + However, hypervisor can set and clear this memory bit at any time: + therefore to make sure hypervisor does not interrupt the + guest and clear the least significant bit in the memory area + in the window between guest testing it to detect + whether it can skip EOI apic write and between guest + clearing it to signal EOI to the hypervisor, + guest must both read the least significant bit in the memory area and + clear it using a single CPU instruction, such as test and clear, or + compare and exchange. + +MSR_KVM_POLL_CONTROL: + 0x4b564d05 + + Control host-side polling. + +data: + Bit 0 enables (1) or disables (0) host-side HLT polling logic. + + KVM guests can request the host not to poll on HLT, for example if + they are performing polling themselves. + +MSR_KVM_ASYNC_PF_INT: + 0x4b564d06 + +data: + Second asynchronous page fault (APF) control MSR. + + Bits 0-7: APIC vector for delivery of 'page ready' APF events. + Bits 8-63: Reserved + + Interrupt vector for asynchnonous 'page ready' notifications delivery. + The vector has to be set up before asynchronous page fault mechanism + is enabled in MSR_KVM_ASYNC_PF_EN. The MSR is only available if + KVM_FEATURE_ASYNC_PF_INT is present in CPUID. + +MSR_KVM_ASYNC_PF_ACK: + 0x4b564d07 + +data: + Asynchronous page fault (APF) acknowledgment. + + When the guest is done processing 'page ready' APF event and 'token' + field in 'struct kvm_vcpu_pv_apf_data' is cleared it is supposed to + write '1' to bit 0 of the MSR, this causes the host to re-scan its queue + and check if there are more notifications pending. The MSR is available + if KVM_FEATURE_ASYNC_PF_INT is present in CPUID. + +MSR_KVM_MIGRATION_CONTROL: + 0x4b564d08 + +data: + This MSR is available if KVM_FEATURE_MIGRATION_CONTROL is present in + CPUID. Bit 0 represents whether live migration of the guest is allowed. + + When a guest is started, bit 0 will be 0 if the guest has encrypted + memory and 1 if the guest does not have encrypted memory. If the + guest is communicating page encryption status to the host using the + ``KVM_HC_MAP_GPA_RANGE`` hypercall, it can set bit 0 in this MSR to + allow live migration of the guest. diff --git a/Documentation/virt/kvm/x86/nested-vmx.rst b/Documentation/virt/kvm/x86/nested-vmx.rst new file mode 100644 index 000000000..ac2095d41 --- /dev/null +++ b/Documentation/virt/kvm/x86/nested-vmx.rst @@ -0,0 +1,244 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========== +Nested VMX +========== + +Overview +--------- + +On Intel processors, KVM uses Intel's VMX (Virtual-Machine eXtensions) +to easily and efficiently run guest operating systems. Normally, these guests +*cannot* themselves be hypervisors running their own guests, because in VMX, +guests cannot use VMX instructions. + +The "Nested VMX" feature adds this missing capability - of running guest +hypervisors (which use VMX) with their own nested guests. It does so by +allowing a guest to use VMX instructions, and correctly and efficiently +emulating them using the single level of VMX available in the hardware. + +We describe in much greater detail the theory behind the nested VMX feature, +its implementation and its performance characteristics, in the OSDI 2010 paper +"The Turtles Project: Design and Implementation of Nested Virtualization", +available at: + + https://www.usenix.org/events/osdi10/tech/full_papers/Ben-Yehuda.pdf + + +Terminology +----------- + +Single-level virtualization has two levels - the host (KVM) and the guests. +In nested virtualization, we have three levels: The host (KVM), which we call +L0, the guest hypervisor, which we call L1, and its nested guest, which we +call L2. + + +Running nested VMX +------------------ + +The nested VMX feature is enabled by default since Linux kernel v4.20. For +older Linux kernel, it can be enabled by giving the "nested=1" option to the +kvm-intel module. + + +No modifications are required to user space (qemu). However, qemu's default +emulated CPU type (qemu64) does not list the "VMX" CPU feature, so it must be +explicitly enabled, by giving qemu one of the following options: + + - cpu host (emulated CPU has all features of the real CPU) + + - cpu qemu64,+vmx (add just the vmx feature to a named CPU type) + + +ABIs +---- + +Nested VMX aims to present a standard and (eventually) fully-functional VMX +implementation for the a guest hypervisor to use. As such, the official +specification of the ABI that it provides is Intel's VMX specification, +namely volume 3B of their "Intel 64 and IA-32 Architectures Software +Developer's Manual". Not all of VMX's features are currently fully supported, +but the goal is to eventually support them all, starting with the VMX features +which are used in practice by popular hypervisors (KVM and others). + +As a VMX implementation, nested VMX presents a VMCS structure to L1. +As mandated by the spec, other than the two fields revision_id and abort, +this structure is *opaque* to its user, who is not supposed to know or care +about its internal structure. Rather, the structure is accessed through the +VMREAD and VMWRITE instructions. +Still, for debugging purposes, KVM developers might be interested to know the +internals of this structure; This is struct vmcs12 from arch/x86/kvm/vmx.c. + +The name "vmcs12" refers to the VMCS that L1 builds for L2. In the code we +also have "vmcs01", the VMCS that L0 built for L1, and "vmcs02" is the VMCS +which L0 builds to actually run L2 - how this is done is explained in the +aforementioned paper. + +For convenience, we repeat the content of struct vmcs12 here. If the internals +of this structure changes, this can break live migration across KVM versions. +VMCS12_REVISION (from vmx.c) should be changed if struct vmcs12 or its inner +struct shadow_vmcs is ever changed. + +:: + + typedef u64 natural_width; + struct __packed vmcs12 { + /* According to the Intel spec, a VMCS region must start with + * these two user-visible fields */ + u32 revision_id; + u32 abort; + + u32 launch_state; /* set to 0 by VMCLEAR, to 1 by VMLAUNCH */ + u32 padding[7]; /* room for future expansion */ + + u64 io_bitmap_a; + u64 io_bitmap_b; + u64 msr_bitmap; + u64 vm_exit_msr_store_addr; + u64 vm_exit_msr_load_addr; + u64 vm_entry_msr_load_addr; + u64 tsc_offset; + u64 virtual_apic_page_addr; + u64 apic_access_addr; + u64 ept_pointer; + u64 guest_physical_address; + u64 vmcs_link_pointer; + u64 guest_ia32_debugctl; + u64 guest_ia32_pat; + u64 guest_ia32_efer; + u64 guest_pdptr0; + u64 guest_pdptr1; + u64 guest_pdptr2; + u64 guest_pdptr3; + u64 host_ia32_pat; + u64 host_ia32_efer; + u64 padding64[8]; /* room for future expansion */ + natural_width cr0_guest_host_mask; + natural_width cr4_guest_host_mask; + natural_width cr0_read_shadow; + natural_width cr4_read_shadow; + natural_width dead_space[4]; /* Last remnants of cr3_target_value[0-3]. */ + natural_width exit_qualification; + natural_width guest_linear_address; + natural_width guest_cr0; + natural_width guest_cr3; + natural_width guest_cr4; + natural_width guest_es_base; + natural_width guest_cs_base; + natural_width guest_ss_base; + natural_width guest_ds_base; + natural_width guest_fs_base; + natural_width guest_gs_base; + natural_width guest_ldtr_base; + natural_width guest_tr_base; + natural_width guest_gdtr_base; + natural_width guest_idtr_base; + natural_width guest_dr7; + natural_width guest_rsp; + natural_width guest_rip; + natural_width guest_rflags; + natural_width guest_pending_dbg_exceptions; + natural_width guest_sysenter_esp; + natural_width guest_sysenter_eip; + natural_width host_cr0; + natural_width host_cr3; + natural_width host_cr4; + natural_width host_fs_base; + natural_width host_gs_base; + natural_width host_tr_base; + natural_width host_gdtr_base; + natural_width host_idtr_base; + natural_width host_ia32_sysenter_esp; + natural_width host_ia32_sysenter_eip; + natural_width host_rsp; + natural_width host_rip; + natural_width paddingl[8]; /* room for future expansion */ + u32 pin_based_vm_exec_control; + u32 cpu_based_vm_exec_control; + u32 exception_bitmap; + u32 page_fault_error_code_mask; + u32 page_fault_error_code_match; + u32 cr3_target_count; + u32 vm_exit_controls; + u32 vm_exit_msr_store_count; + u32 vm_exit_msr_load_count; + u32 vm_entry_controls; + u32 vm_entry_msr_load_count; + u32 vm_entry_intr_info_field; + u32 vm_entry_exception_error_code; + u32 vm_entry_instruction_len; + u32 tpr_threshold; + u32 secondary_vm_exec_control; + u32 vm_instruction_error; + u32 vm_exit_reason; + u32 vm_exit_intr_info; + u32 vm_exit_intr_error_code; + u32 idt_vectoring_info_field; + u32 idt_vectoring_error_code; + u32 vm_exit_instruction_len; + u32 vmx_instruction_info; + u32 guest_es_limit; + u32 guest_cs_limit; + u32 guest_ss_limit; + u32 guest_ds_limit; + u32 guest_fs_limit; + u32 guest_gs_limit; + u32 guest_ldtr_limit; + u32 guest_tr_limit; + u32 guest_gdtr_limit; + u32 guest_idtr_limit; + u32 guest_es_ar_bytes; + u32 guest_cs_ar_bytes; + u32 guest_ss_ar_bytes; + u32 guest_ds_ar_bytes; + u32 guest_fs_ar_bytes; + u32 guest_gs_ar_bytes; + u32 guest_ldtr_ar_bytes; + u32 guest_tr_ar_bytes; + u32 guest_interruptibility_info; + u32 guest_activity_state; + u32 guest_sysenter_cs; + u32 host_ia32_sysenter_cs; + u32 padding32[8]; /* room for future expansion */ + u16 virtual_processor_id; + u16 guest_es_selector; + u16 guest_cs_selector; + u16 guest_ss_selector; + u16 guest_ds_selector; + u16 guest_fs_selector; + u16 guest_gs_selector; + u16 guest_ldtr_selector; + u16 guest_tr_selector; + u16 host_es_selector; + u16 host_cs_selector; + u16 host_ss_selector; + u16 host_ds_selector; + u16 host_fs_selector; + u16 host_gs_selector; + u16 host_tr_selector; + }; + + +Authors +------- + +These patches were written by: + - Abel Gordon, abelg <at> il.ibm.com + - Nadav Har'El, nyh <at> il.ibm.com + - Orit Wasserman, oritw <at> il.ibm.com + - Ben-Ami Yassor, benami <at> il.ibm.com + - Muli Ben-Yehuda, muli <at> il.ibm.com + +With contributions by: + - Anthony Liguori, aliguori <at> us.ibm.com + - Mike Day, mdday <at> us.ibm.com + - Michael Factor, factor <at> il.ibm.com + - Zvi Dubitzky, dubi <at> il.ibm.com + +And valuable reviews by: + - Avi Kivity, avi <at> redhat.com + - Gleb Natapov, gleb <at> redhat.com + - Marcelo Tosatti, mtosatti <at> redhat.com + - Kevin Tian, kevin.tian <at> intel.com + - and others. diff --git a/Documentation/virt/kvm/x86/running-nested-guests.rst b/Documentation/virt/kvm/x86/running-nested-guests.rst new file mode 100644 index 000000000..87326413d --- /dev/null +++ b/Documentation/virt/kvm/x86/running-nested-guests.rst @@ -0,0 +1,278 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================== +Running nested guests with KVM +============================== + +A nested guest is the ability to run a guest inside another guest (it +can be KVM-based or a different hypervisor). The straightforward +example is a KVM guest that in turn runs on a KVM guest (the rest of +this document is built on this example):: + + .----------------. .----------------. + | | | | + | L2 | | L2 | + | (Nested Guest) | | (Nested Guest) | + | | | | + |----------------'--'----------------| + | | + | L1 (Guest Hypervisor) | + | KVM (/dev/kvm) | + | | + .------------------------------------------------------. + | L0 (Host Hypervisor) | + | KVM (/dev/kvm) | + |------------------------------------------------------| + | Hardware (with virtualization extensions) | + '------------------------------------------------------' + +Terminology: + +- L0 – level-0; the bare metal host, running KVM + +- L1 – level-1 guest; a VM running on L0; also called the "guest + hypervisor", as it itself is capable of running KVM. + +- L2 – level-2 guest; a VM running on L1, this is the "nested guest" + +.. note:: The above diagram is modelled after the x86 architecture; + s390x, ppc64 and other architectures are likely to have + a different design for nesting. + + For example, s390x always has an LPAR (LogicalPARtition) + hypervisor running on bare metal, adding another layer and + resulting in at least four levels in a nested setup — L0 (bare + metal, running the LPAR hypervisor), L1 (host hypervisor), L2 + (guest hypervisor), L3 (nested guest). + + This document will stick with the three-level terminology (L0, + L1, and L2) for all architectures; and will largely focus on + x86. + + +Use Cases +--------- + +There are several scenarios where nested KVM can be useful, to name a +few: + +- As a developer, you want to test your software on different operating + systems (OSes). Instead of renting multiple VMs from a Cloud + Provider, using nested KVM lets you rent a large enough "guest + hypervisor" (level-1 guest). This in turn allows you to create + multiple nested guests (level-2 guests), running different OSes, on + which you can develop and test your software. + +- Live migration of "guest hypervisors" and their nested guests, for + load balancing, disaster recovery, etc. + +- VM image creation tools (e.g. ``virt-install``, etc) often run + their own VM, and users expect these to work inside a VM. + +- Some OSes use virtualization internally for security (e.g. to let + applications run safely in isolation). + + +Enabling "nested" (x86) +----------------------- + +From Linux kernel v4.20 onwards, the ``nested`` KVM parameter is enabled +by default for Intel and AMD. (Though your Linux distribution might +override this default.) + +In case you are running a Linux kernel older than v4.19, to enable +nesting, set the ``nested`` KVM module parameter to ``Y`` or ``1``. To +persist this setting across reboots, you can add it in a config file, as +shown below: + +1. On the bare metal host (L0), list the kernel modules and ensure that + the KVM modules:: + + $ lsmod | grep -i kvm + kvm_intel 133627 0 + kvm 435079 1 kvm_intel + +2. Show information for ``kvm_intel`` module:: + + $ modinfo kvm_intel | grep -i nested + parm: nested:bool + +3. For the nested KVM configuration to persist across reboots, place the + below in ``/etc/modprobed/kvm_intel.conf`` (create the file if it + doesn't exist):: + + $ cat /etc/modprobe.d/kvm_intel.conf + options kvm-intel nested=y + +4. Unload and re-load the KVM Intel module:: + + $ sudo rmmod kvm-intel + $ sudo modprobe kvm-intel + +5. Verify if the ``nested`` parameter for KVM is enabled:: + + $ cat /sys/module/kvm_intel/parameters/nested + Y + +For AMD hosts, the process is the same as above, except that the module +name is ``kvm-amd``. + + +Additional nested-related kernel parameters (x86) +------------------------------------------------- + +If your hardware is sufficiently advanced (Intel Haswell processor or +higher, which has newer hardware virt extensions), the following +additional features will also be enabled by default: "Shadow VMCS +(Virtual Machine Control Structure)", APIC Virtualization on your bare +metal host (L0). Parameters for Intel hosts:: + + $ cat /sys/module/kvm_intel/parameters/enable_shadow_vmcs + Y + + $ cat /sys/module/kvm_intel/parameters/enable_apicv + Y + + $ cat /sys/module/kvm_intel/parameters/ept + Y + +.. note:: If you suspect your L2 (i.e. nested guest) is running slower, + ensure the above are enabled (particularly + ``enable_shadow_vmcs`` and ``ept``). + + +Starting a nested guest (x86) +----------------------------- + +Once your bare metal host (L0) is configured for nesting, you should be +able to start an L1 guest with:: + + $ qemu-kvm -cpu host [...] + +The above will pass through the host CPU's capabilities as-is to the +guest, or for better live migration compatibility, use a named CPU +model supported by QEMU. e.g.:: + + $ qemu-kvm -cpu Haswell-noTSX-IBRS,vmx=on + +then the guest hypervisor will subsequently be capable of running a +nested guest with accelerated KVM. + + +Enabling "nested" (s390x) +------------------------- + +1. On the host hypervisor (L0), enable the ``nested`` parameter on + s390x:: + + $ rmmod kvm + $ modprobe kvm nested=1 + +.. note:: On s390x, the kernel parameter ``hpage`` is mutually exclusive + with the ``nested`` parameter — i.e. to be able to enable + ``nested``, the ``hpage`` parameter *must* be disabled. + +2. The guest hypervisor (L1) must be provided with the ``sie`` CPU + feature — with QEMU, this can be done by using "host passthrough" + (via the command-line ``-cpu host``). + +3. Now the KVM module can be loaded in the L1 (guest hypervisor):: + + $ modprobe kvm + + +Live migration with nested KVM +------------------------------ + +Migrating an L1 guest, with a *live* nested guest in it, to another +bare metal host, works as of Linux kernel 5.3 and QEMU 4.2.0 for +Intel x86 systems, and even on older versions for s390x. + +On AMD systems, once an L1 guest has started an L2 guest, the L1 guest +should no longer be migrated or saved (refer to QEMU documentation on +"savevm"/"loadvm") until the L2 guest shuts down. Attempting to migrate +or save-and-load an L1 guest while an L2 guest is running will result in +undefined behavior. You might see a ``kernel BUG!`` entry in ``dmesg``, a +kernel 'oops', or an outright kernel panic. Such a migrated or loaded L1 +guest can no longer be considered stable or secure, and must be restarted. +Migrating an L1 guest merely configured to support nesting, while not +actually running L2 guests, is expected to function normally even on AMD +systems but may fail once guests are started. + +Migrating an L2 guest is always expected to succeed, so all the following +scenarios should work even on AMD systems: + +- Migrating a nested guest (L2) to another L1 guest on the *same* bare + metal host. + +- Migrating a nested guest (L2) to another L1 guest on a *different* + bare metal host. + +- Migrating a nested guest (L2) to a bare metal host. + +Reporting bugs from nested setups +----------------------------------- + +Debugging "nested" problems can involve sifting through log files across +L0, L1 and L2; this can result in tedious back-n-forth between the bug +reporter and the bug fixer. + +- Mention that you are in a "nested" setup. If you are running any kind + of "nesting" at all, say so. Unfortunately, this needs to be called + out because when reporting bugs, people tend to forget to even + *mention* that they're using nested virtualization. + +- Ensure you are actually running KVM on KVM. Sometimes people do not + have KVM enabled for their guest hypervisor (L1), which results in + them running with pure emulation or what QEMU calls it as "TCG", but + they think they're running nested KVM. Thus confusing "nested Virt" + (which could also mean, QEMU on KVM) with "nested KVM" (KVM on KVM). + +Information to collect (generic) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The following is not an exhaustive list, but a very good starting point: + + - Kernel, libvirt, and QEMU version from L0 + + - Kernel, libvirt and QEMU version from L1 + + - QEMU command-line of L1 -- when using libvirt, you'll find it here: + ``/var/log/libvirt/qemu/instance.log`` + + - QEMU command-line of L2 -- as above, when using libvirt, get the + complete libvirt-generated QEMU command-line + + - ``cat /sys/cpuinfo`` from L0 + + - ``cat /sys/cpuinfo`` from L1 + + - ``lscpu`` from L0 + + - ``lscpu`` from L1 + + - Full ``dmesg`` output from L0 + + - Full ``dmesg`` output from L1 + +x86-specific info to collect +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Both the below commands, ``x86info`` and ``dmidecode``, should be +available on most Linux distributions with the same name: + + - Output of: ``x86info -a`` from L0 + + - Output of: ``x86info -a`` from L1 + + - Output of: ``dmidecode`` from L0 + + - Output of: ``dmidecode`` from L1 + +s390x-specific info to collect +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Along with the earlier mentioned generic details, the below is +also recommended: + + - ``/proc/sysinfo`` from L1; this will also include the info from L0 diff --git a/Documentation/virt/kvm/x86/timekeeping.rst b/Documentation/virt/kvm/x86/timekeeping.rst new file mode 100644 index 000000000..21ae7efa2 --- /dev/null +++ b/Documentation/virt/kvm/x86/timekeeping.rst @@ -0,0 +1,645 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================================================== +Timekeeping Virtualization for X86-Based Architectures +====================================================== + +:Author: Zachary Amsden <zamsden@redhat.com> +:Copyright: (c) 2010, Red Hat. All rights reserved. + +.. Contents + + 1) Overview + 2) Timing Devices + 3) TSC Hardware + 4) Virtualization Problems + +1. Overview +=========== + +One of the most complicated parts of the X86 platform, and specifically, +the virtualization of this platform is the plethora of timing devices available +and the complexity of emulating those devices. In addition, virtualization of +time introduces a new set of challenges because it introduces a multiplexed +division of time beyond the control of the guest CPU. + +First, we will describe the various timekeeping hardware available, then +present some of the problems which arise and solutions available, giving +specific recommendations for certain classes of KVM guests. + +The purpose of this document is to collect data and information relevant to +timekeeping which may be difficult to find elsewhere, specifically, +information relevant to KVM and hardware-based virtualization. + +2. Timing Devices +================= + +First we discuss the basic hardware devices available. TSC and the related +KVM clock are special enough to warrant a full exposition and are described in +the following section. + +2.1. i8254 - PIT +---------------- + +One of the first timer devices available is the programmable interrupt timer, +or PIT. The PIT has a fixed frequency 1.193182 MHz base clock and three +channels which can be programmed to deliver periodic or one-shot interrupts. +These three channels can be configured in different modes and have individual +counters. Channel 1 and 2 were not available for general use in the original +IBM PC, and historically were connected to control RAM refresh and the PC +speaker. Now the PIT is typically integrated as part of an emulated chipset +and a separate physical PIT is not used. + +The PIT uses I/O ports 0x40 - 0x43. Access to the 16-bit counters is done +using single or multiple byte access to the I/O ports. There are 6 modes +available, but not all modes are available to all timers, as only timer 2 +has a connected gate input, required for modes 1 and 5. The gate line is +controlled by port 61h, bit 0, as illustrated in the following diagram:: + + -------------- ---------------- + | | | | + | 1.1932 MHz|---------->| CLOCK OUT | ---------> IRQ 0 + | Clock | | | | + -------------- | +->| GATE TIMER 0 | + | ---------------- + | + | ---------------- + | | | + |------>| CLOCK OUT | ---------> 66.3 KHZ DRAM + | | | (aka /dev/null) + | +->| GATE TIMER 1 | + | ---------------- + | + | ---------------- + | | | + |------>| CLOCK OUT | ---------> Port 61h, bit 5 + | | | + Port 61h, bit 0 -------->| GATE TIMER 2 | \_.---- ____ + ---------------- _| )--|LPF|---Speaker + / *---- \___/ + Port 61h, bit 1 ---------------------------------/ + +The timer modes are now described. + +Mode 0: Single Timeout. + This is a one-shot software timeout that counts down + when the gate is high (always true for timers 0 and 1). When the count + reaches zero, the output goes high. + +Mode 1: Triggered One-shot. + The output is initially set high. When the gate + line is set high, a countdown is initiated (which does not stop if the gate is + lowered), during which the output is set low. When the count reaches zero, + the output goes high. + +Mode 2: Rate Generator. + The output is initially set high. When the countdown + reaches 1, the output goes low for one count and then returns high. The value + is reloaded and the countdown automatically resumes. If the gate line goes + low, the count is halted. If the output is low when the gate is lowered, the + output automatically goes high (this only affects timer 2). + +Mode 3: Square Wave. + This generates a high / low square wave. The count + determines the length of the pulse, which alternates between high and low + when zero is reached. The count only proceeds when gate is high and is + automatically reloaded on reaching zero. The count is decremented twice at + each clock to generate a full high / low cycle at the full periodic rate. + If the count is even, the clock remains high for N/2 counts and low for N/2 + counts; if the clock is odd, the clock is high for (N+1)/2 counts and low + for (N-1)/2 counts. Only even values are latched by the counter, so odd + values are not observed when reading. This is the intended mode for timer 2, + which generates sine-like tones by low-pass filtering the square wave output. + +Mode 4: Software Strobe. + After programming this mode and loading the counter, + the output remains high until the counter reaches zero. Then the output + goes low for 1 clock cycle and returns high. The counter is not reloaded. + Counting only occurs when gate is high. + +Mode 5: Hardware Strobe. + After programming and loading the counter, the + output remains high. When the gate is raised, a countdown is initiated + (which does not stop if the gate is lowered). When the counter reaches zero, + the output goes low for 1 clock cycle and then returns high. The counter is + not reloaded. + +In addition to normal binary counting, the PIT supports BCD counting. The +command port, 0x43 is used to set the counter and mode for each of the three +timers. + +PIT commands, issued to port 0x43, using the following bit encoding:: + + Bit 7-4: Command (See table below) + Bit 3-1: Mode (000 = Mode 0, 101 = Mode 5, 11X = undefined) + Bit 0 : Binary (0) / BCD (1) + +Command table:: + + 0000 - Latch Timer 0 count for port 0x40 + sample and hold the count to be read in port 0x40; + additional commands ignored until counter is read; + mode bits ignored. + + 0001 - Set Timer 0 LSB mode for port 0x40 + set timer to read LSB only and force MSB to zero; + mode bits set timer mode + + 0010 - Set Timer 0 MSB mode for port 0x40 + set timer to read MSB only and force LSB to zero; + mode bits set timer mode + + 0011 - Set Timer 0 16-bit mode for port 0x40 + set timer to read / write LSB first, then MSB; + mode bits set timer mode + + 0100 - Latch Timer 1 count for port 0x41 - as described above + 0101 - Set Timer 1 LSB mode for port 0x41 - as described above + 0110 - Set Timer 1 MSB mode for port 0x41 - as described above + 0111 - Set Timer 1 16-bit mode for port 0x41 - as described above + + 1000 - Latch Timer 2 count for port 0x42 - as described above + 1001 - Set Timer 2 LSB mode for port 0x42 - as described above + 1010 - Set Timer 2 MSB mode for port 0x42 - as described above + 1011 - Set Timer 2 16-bit mode for port 0x42 as described above + + 1101 - General counter latch + Latch combination of counters into corresponding ports + Bit 3 = Counter 2 + Bit 2 = Counter 1 + Bit 1 = Counter 0 + Bit 0 = Unused + + 1110 - Latch timer status + Latch combination of counter mode into corresponding ports + Bit 3 = Counter 2 + Bit 2 = Counter 1 + Bit 1 = Counter 0 + + The output of ports 0x40-0x42 following this command will be: + + Bit 7 = Output pin + Bit 6 = Count loaded (0 if timer has expired) + Bit 5-4 = Read / Write mode + 01 = MSB only + 10 = LSB only + 11 = LSB / MSB (16-bit) + Bit 3-1 = Mode + Bit 0 = Binary (0) / BCD mode (1) + +2.2. RTC +-------- + +The second device which was available in the original PC was the MC146818 real +time clock. The original device is now obsolete, and usually emulated by the +system chipset, sometimes by an HPET and some frankenstein IRQ routing. + +The RTC is accessed through CMOS variables, which uses an index register to +control which bytes are read. Since there is only one index register, read +of the CMOS and read of the RTC require lock protection (in addition, it is +dangerous to allow userspace utilities such as hwclock to have direct RTC +access, as they could corrupt kernel reads and writes of CMOS memory). + +The RTC generates an interrupt which is usually routed to IRQ 8. The interrupt +can function as a periodic timer, an additional once a day alarm, and can issue +interrupts after an update of the CMOS registers by the MC146818 is complete. +The type of interrupt is signalled in the RTC status registers. + +The RTC will update the current time fields by battery power even while the +system is off. The current time fields should not be read while an update is +in progress, as indicated in the status register. + +The clock uses a 32.768kHz crystal, so bits 6-4 of register A should be +programmed to a 32kHz divider if the RTC is to count seconds. + +This is the RAM map originally used for the RTC/CMOS:: + + Location Size Description + ------------------------------------------ + 00h byte Current second (BCD) + 01h byte Seconds alarm (BCD) + 02h byte Current minute (BCD) + 03h byte Minutes alarm (BCD) + 04h byte Current hour (BCD) + 05h byte Hours alarm (BCD) + 06h byte Current day of week (BCD) + 07h byte Current day of month (BCD) + 08h byte Current month (BCD) + 09h byte Current year (BCD) + 0Ah byte Register A + bit 7 = Update in progress + bit 6-4 = Divider for clock + 000 = 4.194 MHz + 001 = 1.049 MHz + 010 = 32 kHz + 10X = test modes + 110 = reset / disable + 111 = reset / disable + bit 3-0 = Rate selection for periodic interrupt + 000 = periodic timer disabled + 001 = 3.90625 uS + 010 = 7.8125 uS + 011 = .122070 mS + 100 = .244141 mS + ... + 1101 = 125 mS + 1110 = 250 mS + 1111 = 500 mS + 0Bh byte Register B + bit 7 = Run (0) / Halt (1) + bit 6 = Periodic interrupt enable + bit 5 = Alarm interrupt enable + bit 4 = Update-ended interrupt enable + bit 3 = Square wave interrupt enable + bit 2 = BCD calendar (0) / Binary (1) + bit 1 = 12-hour mode (0) / 24-hour mode (1) + bit 0 = 0 (DST off) / 1 (DST enabled) + OCh byte Register C (read only) + bit 7 = interrupt request flag (IRQF) + bit 6 = periodic interrupt flag (PF) + bit 5 = alarm interrupt flag (AF) + bit 4 = update interrupt flag (UF) + bit 3-0 = reserved + ODh byte Register D (read only) + bit 7 = RTC has power + bit 6-0 = reserved + 32h byte Current century BCD (*) + (*) location vendor specific and now determined from ACPI global tables + +2.3. APIC +--------- + +On Pentium and later processors, an on-board timer is available to each CPU +as part of the Advanced Programmable Interrupt Controller. The APIC is +accessed through memory-mapped registers and provides interrupt service to each +CPU, used for IPIs and local timer interrupts. + +Although in theory the APIC is a safe and stable source for local interrupts, +in practice, many bugs and glitches have occurred due to the special nature of +the APIC CPU-local memory-mapped hardware. Beware that CPU errata may affect +the use of the APIC and that workarounds may be required. In addition, some of +these workarounds pose unique constraints for virtualization - requiring either +extra overhead incurred from extra reads of memory-mapped I/O or additional +functionality that may be more computationally expensive to implement. + +Since the APIC is documented quite well in the Intel and AMD manuals, we will +avoid repetition of the detail here. It should be pointed out that the APIC +timer is programmed through the LVT (local vector timer) register, is capable +of one-shot or periodic operation, and is based on the bus clock divided down +by the programmable divider register. + +2.4. HPET +--------- + +HPET is quite complex, and was originally intended to replace the PIT / RTC +support of the X86 PC. It remains to be seen whether that will be the case, as +the de facto standard of PC hardware is to emulate these older devices. Some +systems designated as legacy free may support only the HPET as a hardware timer +device. + +The HPET spec is rather loose and vague, requiring at least 3 hardware timers, +but allowing implementation freedom to support many more. It also imposes no +fixed rate on the timer frequency, but does impose some extremal values on +frequency, error and slew. + +In general, the HPET is recommended as a high precision (compared to PIT /RTC) +time source which is independent of local variation (as there is only one HPET +in any given system). The HPET is also memory-mapped, and its presence is +indicated through ACPI tables by the BIOS. + +Detailed specification of the HPET is beyond the current scope of this +document, as it is also very well documented elsewhere. + +2.5. Offboard Timers +-------------------- + +Several cards, both proprietary (watchdog boards) and commonplace (e1000) have +timing chips built into the cards which may have registers which are accessible +to kernel or user drivers. To the author's knowledge, using these to generate +a clocksource for a Linux or other kernel has not yet been attempted and is in +general frowned upon as not playing by the agreed rules of the game. Such a +timer device would require additional support to be virtualized properly and is +not considered important at this time as no known operating system does this. + +3. TSC Hardware +=============== + +The TSC or time stamp counter is relatively simple in theory; it counts +instruction cycles issued by the processor, which can be used as a measure of +time. In practice, due to a number of problems, it is the most complicated +timekeeping device to use. + +The TSC is represented internally as a 64-bit MSR which can be read with the +RDMSR, RDTSC, or RDTSCP (when available) instructions. In the past, hardware +limitations made it possible to write the TSC, but generally on old hardware it +was only possible to write the low 32-bits of the 64-bit counter, and the upper +32-bits of the counter were cleared. Now, however, on Intel processors family +0Fh, for models 3, 4 and 6, and family 06h, models e and f, this restriction +has been lifted and all 64-bits are writable. On AMD systems, the ability to +write the TSC MSR is not an architectural guarantee. + +The TSC is accessible from CPL-0 and conditionally, for CPL > 0 software by +means of the CR4.TSD bit, which when enabled, disables CPL > 0 TSC access. + +Some vendors have implemented an additional instruction, RDTSCP, which returns +atomically not just the TSC, but an indicator which corresponds to the +processor number. This can be used to index into an array of TSC variables to +determine offset information in SMP systems where TSCs are not synchronized. +The presence of this instruction must be determined by consulting CPUID feature +bits. + +Both VMX and SVM provide extension fields in the virtualization hardware which +allows the guest visible TSC to be offset by a constant. Newer implementations +promise to allow the TSC to additionally be scaled, but this hardware is not +yet widely available. + +3.1. TSC synchronization +------------------------ + +The TSC is a CPU-local clock in most implementations. This means, on SMP +platforms, the TSCs of different CPUs may start at different times depending +on when the CPUs are powered on. Generally, CPUs on the same die will share +the same clock, however, this is not always the case. + +The BIOS may attempt to resynchronize the TSCs during the poweron process and +the operating system or other system software may attempt to do this as well. +Several hardware limitations make the problem worse - if it is not possible to +write the full 64-bits of the TSC, it may be impossible to match the TSC in +newly arriving CPUs to that of the rest of the system, resulting in +unsynchronized TSCs. This may be done by BIOS or system software, but in +practice, getting a perfectly synchronized TSC will not be possible unless all +values are read from the same clock, which generally only is possible on single +socket systems or those with special hardware support. + +3.2. TSC and CPU hotplug +------------------------ + +As touched on already, CPUs which arrive later than the boot time of the system +may not have a TSC value that is synchronized with the rest of the system. +Either system software, BIOS, or SMM code may actually try to establish the TSC +to a value matching the rest of the system, but a perfect match is usually not +a guarantee. This can have the effect of bringing a system from a state where +TSC is synchronized back to a state where TSC synchronization flaws, however +small, may be exposed to the OS and any virtualization environment. + +3.3. TSC and multi-socket / NUMA +-------------------------------- + +Multi-socket systems, especially large multi-socket systems are likely to have +individual clocksources rather than a single, universally distributed clock. +Since these clocks are driven by different crystals, they will not have +perfectly matched frequency, and temperature and electrical variations will +cause the CPU clocks, and thus the TSCs to drift over time. Depending on the +exact clock and bus design, the drift may or may not be fixed in absolute +error, and may accumulate over time. + +In addition, very large systems may deliberately slew the clocks of individual +cores. This technique, known as spread-spectrum clocking, reduces EMI at the +clock frequency and harmonics of it, which may be required to pass FCC +standards for telecommunications and computer equipment. + +It is recommended not to trust the TSCs to remain synchronized on NUMA or +multiple socket systems for these reasons. + +3.4. TSC and C-states +--------------------- + +C-states, or idling states of the processor, especially C1E and deeper sleep +states may be problematic for TSC as well. The TSC may stop advancing in such +a state, resulting in a TSC which is behind that of other CPUs when execution +is resumed. Such CPUs must be detected and flagged by the operating system +based on CPU and chipset identifications. + +The TSC in such a case may be corrected by catching it up to a known external +clocksource. + +3.5. TSC frequency change / P-states +------------------------------------ + +To make things slightly more interesting, some CPUs may change frequency. They +may or may not run the TSC at the same rate, and because the frequency change +may be staggered or slewed, at some points in time, the TSC rate may not be +known other than falling within a range of values. In this case, the TSC will +not be a stable time source, and must be calibrated against a known, stable, +external clock to be a usable source of time. + +Whether the TSC runs at a constant rate or scales with the P-state is model +dependent and must be determined by inspecting CPUID, chipset or vendor +specific MSR fields. + +In addition, some vendors have known bugs where the P-state is actually +compensated for properly during normal operation, but when the processor is +inactive, the P-state may be raised temporarily to service cache misses from +other processors. In such cases, the TSC on halted CPUs could advance faster +than that of non-halted processors. AMD Turion processors are known to have +this problem. + +3.6. TSC and STPCLK / T-states +------------------------------ + +External signals given to the processor may also have the effect of stopping +the TSC. This is typically done for thermal emergency power control to prevent +an overheating condition, and typically, there is no way to detect that this +condition has happened. + +3.7. TSC virtualization - VMX +----------------------------- + +VMX provides conditional trapping of RDTSC, RDMSR, WRMSR and RDTSCP +instructions, which is enough for full virtualization of TSC in any manner. In +addition, VMX allows passing through the host TSC plus an additional TSC_OFFSET +field specified in the VMCS. Special instructions must be used to read and +write the VMCS field. + +3.8. TSC virtualization - SVM +----------------------------- + +SVM provides conditional trapping of RDTSC, RDMSR, WRMSR and RDTSCP +instructions, which is enough for full virtualization of TSC in any manner. In +addition, SVM allows passing through the host TSC plus an additional offset +field specified in the SVM control block. + +3.9. TSC feature bits in Linux +------------------------------ + +In summary, there is no way to guarantee the TSC remains in perfect +synchronization unless it is explicitly guaranteed by the architecture. Even +if so, the TSCs in multi-sockets or NUMA systems may still run independently +despite being locally consistent. + +The following feature bits are used by Linux to signal various TSC attributes, +but they can only be taken to be meaningful for UP or single node systems. + +========================= ======================================= +X86_FEATURE_TSC The TSC is available in hardware +X86_FEATURE_RDTSCP The RDTSCP instruction is available +X86_FEATURE_CONSTANT_TSC The TSC rate is unchanged with P-states +X86_FEATURE_NONSTOP_TSC The TSC does not stop in C-states +X86_FEATURE_TSC_RELIABLE TSC sync checks are skipped (VMware) +========================= ======================================= + +4. Virtualization Problems +========================== + +Timekeeping is especially problematic for virtualization because a number of +challenges arise. The most obvious problem is that time is now shared between +the host and, potentially, a number of virtual machines. Thus the virtual +operating system does not run with 100% usage of the CPU, despite the fact that +it may very well make that assumption. It may expect it to remain true to very +exacting bounds when interrupt sources are disabled, but in reality only its +virtual interrupt sources are disabled, and the machine may still be preempted +at any time. This causes problems as the passage of real time, the injection +of machine interrupts and the associated clock sources are no longer completely +synchronized with real time. + +This same problem can occur on native hardware to a degree, as SMM mode may +steal cycles from the naturally on X86 systems when SMM mode is used by the +BIOS, but not in such an extreme fashion. However, the fact that SMM mode may +cause similar problems to virtualization makes it a good justification for +solving many of these problems on bare metal. + +4.1. Interrupt clocking +----------------------- + +One of the most immediate problems that occurs with legacy operating systems +is that the system timekeeping routines are often designed to keep track of +time by counting periodic interrupts. These interrupts may come from the PIT +or the RTC, but the problem is the same: the host virtualization engine may not +be able to deliver the proper number of interrupts per second, and so guest +time may fall behind. This is especially problematic if a high interrupt rate +is selected, such as 1000 HZ, which is unfortunately the default for many Linux +guests. + +There are three approaches to solving this problem; first, it may be possible +to simply ignore it. Guests which have a separate time source for tracking +'wall clock' or 'real time' may not need any adjustment of their interrupts to +maintain proper time. If this is not sufficient, it may be necessary to inject +additional interrupts into the guest in order to increase the effective +interrupt rate. This approach leads to complications in extreme conditions, +where host load or guest lag is too much to compensate for, and thus another +solution to the problem has risen: the guest may need to become aware of lost +ticks and compensate for them internally. Although promising in theory, the +implementation of this policy in Linux has been extremely error prone, and a +number of buggy variants of lost tick compensation are distributed across +commonly used Linux systems. + +Windows uses periodic RTC clocking as a means of keeping time internally, and +thus requires interrupt slewing to keep proper time. It does use a low enough +rate (ed: is it 18.2 Hz?) however that it has not yet been a problem in +practice. + +4.2. TSC sampling and serialization +----------------------------------- + +As the highest precision time source available, the cycle counter of the CPU +has aroused much interest from developers. As explained above, this timer has +many problems unique to its nature as a local, potentially unstable and +potentially unsynchronized source. One issue which is not unique to the TSC, +but is highlighted because of its very precise nature is sampling delay. By +definition, the counter, once read is already old. However, it is also +possible for the counter to be read ahead of the actual use of the result. +This is a consequence of the superscalar execution of the instruction stream, +which may execute instructions out of order. Such execution is called +non-serialized. Forcing serialized execution is necessary for precise +measurement with the TSC, and requires a serializing instruction, such as CPUID +or an MSR read. + +Since CPUID may actually be virtualized by a trap and emulate mechanism, this +serialization can pose a performance issue for hardware virtualization. An +accurate time stamp counter reading may therefore not always be available, and +it may be necessary for an implementation to guard against "backwards" reads of +the TSC as seen from other CPUs, even in an otherwise perfectly synchronized +system. + +4.3. Timespec aliasing +---------------------- + +Additionally, this lack of serialization from the TSC poses another challenge +when using results of the TSC when measured against another time source. As +the TSC is much higher precision, many possible values of the TSC may be read +while another clock is still expressing the same value. + +That is, you may read (T,T+10) while external clock C maintains the same value. +Due to non-serialized reads, you may actually end up with a range which +fluctuates - from (T-1.. T+10). Thus, any time calculated from a TSC, but +calibrated against an external value may have a range of valid values. +Re-calibrating this computation may actually cause time, as computed after the +calibration, to go backwards, compared with time computed before the +calibration. + +This problem is particularly pronounced with an internal time source in Linux, +the kernel time, which is expressed in the theoretically high resolution +timespec - but which advances in much larger granularity intervals, sometimes +at the rate of jiffies, and possibly in catchup modes, at a much larger step. + +This aliasing requires care in the computation and recalibration of kvmclock +and any other values derived from TSC computation (such as TSC virtualization +itself). + +4.4. Migration +-------------- + +Migration of a virtual machine raises problems for timekeeping in two ways. +First, the migration itself may take time, during which interrupts cannot be +delivered, and after which, the guest time may need to be caught up. NTP may +be able to help to some degree here, as the clock correction required is +typically small enough to fall in the NTP-correctable window. + +An additional concern is that timers based off the TSC (or HPET, if the raw bus +clock is exposed) may now be running at different rates, requiring compensation +in some way in the hypervisor by virtualizing these timers. In addition, +migrating to a faster machine may preclude the use of a passthrough TSC, as a +faster clock cannot be made visible to a guest without the potential of time +advancing faster than usual. A slower clock is less of a problem, as it can +always be caught up to the original rate. KVM clock avoids these problems by +simply storing multipliers and offsets against the TSC for the guest to convert +back into nanosecond resolution values. + +4.5. Scheduling +--------------- + +Since scheduling may be based on precise timing and firing of interrupts, the +scheduling algorithms of an operating system may be adversely affected by +virtualization. In theory, the effect is random and should be universally +distributed, but in contrived as well as real scenarios (guest device access, +causes of virtualization exits, possible context switch), this may not always +be the case. The effect of this has not been well studied. + +In an attempt to work around this, several implementations have provided a +paravirtualized scheduler clock, which reveals the true amount of CPU time for +which a virtual machine has been running. + +4.6. Watchdogs +-------------- + +Watchdog timers, such as the lock detector in Linux may fire accidentally when +running under hardware virtualization due to timer interrupts being delayed or +misinterpretation of the passage of real time. Usually, these warnings are +spurious and can be ignored, but in some circumstances it may be necessary to +disable such detection. + +4.7. Delays and precision timing +-------------------------------- + +Precise timing and delays may not be possible in a virtualized system. This +can happen if the system is controlling physical hardware, or issues delays to +compensate for slower I/O to and from devices. The first issue is not solvable +in general for a virtualized system; hardware control software can't be +adequately virtualized without a full real-time operating system, which would +require an RT aware virtualization platform. + +The second issue may cause performance problems, but this is unlikely to be a +significant issue. In many cases these delays may be eliminated through +configuration or paravirtualization. + +4.8. Covert channels and leaks +------------------------------ + +In addition to the above problems, time information will inevitably leak to the +guest about the host in anything but a perfect implementation of virtualized +time. This may allow the guest to infer the presence of a hypervisor (as in a +red-pill type detection), and it may allow information to leak between guests +by using CPU utilization itself as a signalling channel. Preventing such +problems would require completely isolated virtual time which may not track +real time any longer. This may be useful in certain security or QA contexts, +but in general isn't recommended for real-world deployment scenarios. |