Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 194 insertions, 0 deletions

diff --git a/Documentation/userspace-api/netlink/netlink-raw.rst b/Documentation/userspace-api/netlink/netlink-raw.rst
new file mode 100644
index 000000000..aae296c17
--- /dev/null
+++ b/Documentation/userspace-api/netlink/netlink-raw.rst
@@ -0,0 +1,194 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+
+======================================================
+Netlink specification support for raw Netlink families
+======================================================
+
+This document describes the additional properties required by raw Netlink
+families such as ``NETLINK_ROUTE`` which use the ``netlink-raw`` protocol
+specification.
+
+Specification
+=============
+
+The netlink-raw schema extends the :doc:`genetlink-legacy <genetlink-legacy>`
+schema with properties that are needed to specify the protocol numbers and
+multicast IDs used by raw netlink families. See :ref:`classic_netlink` for more
+information. The raw netlink families also make use of type-specific
+sub-messages.
+
+Globals
+-------
+
+protonum
+~~~~~~~~
+
+The ``protonum`` property is used to specify the protocol number to use when
+opening a netlink socket.
+
+.. code-block:: yaml
+
+  # SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
+
+  name: rt-addr
+  protocol: netlink-raw
+  protonum: 0             # part of the NETLINK_ROUTE protocol
+
+
+Multicast group properties
+--------------------------
+
+value
+~~~~~
+
+The ``value`` property is used to specify the group ID to use for multicast
+group registration.
+
+.. code-block:: yaml
+
+  mcast-groups:
+    list:
+      -
+        name: rtnlgrp-ipv4-ifaddr
+        value: 5
+      -
+        name: rtnlgrp-ipv6-ifaddr
+        value: 9
+      -
+        name: rtnlgrp-mctp-ifaddr
+        value: 34
+
+Sub-messages
+------------
+
+Several raw netlink families such as
+:ref:`rt-link<netlink-rt-link>` and
+:ref:`tc<netlink-tc>` use attribute nesting as an
+abstraction to carry module specific information.
+
+Conceptually it looks as follows::
+
+    [OUTER NEST OR MESSAGE LEVEL]
+      [GENERIC ATTR 1]
+      [GENERIC ATTR 2]
+      [GENERIC ATTR 3]
+      [GENERIC ATTR - wrapper]
+        [MODULE SPECIFIC ATTR 1]
+        [MODULE SPECIFIC ATTR 2]
+
+The ``GENERIC ATTRs`` at the outer level are defined in the core (or rt_link or
+core TC), while specific drivers, TC classifiers, qdiscs etc. can carry their
+own information wrapped in the ``GENERIC ATTR - wrapper``. Even though the
+example above shows attributes nesting inside the wrapper, the modules generally
+have full freedom to define the format of the nest. In practice the payload of
+the wrapper attr has very similar characteristics to a netlink message. It may
+contain a fixed header / structure, netlink attributes, or both. Because of
+those shared characteristics we refer to the payload of the wrapper attribute as
+a sub-message.
+
+A sub-message attribute uses the value of another attribute as a selector key to
+choose the right sub-message format. For example if the following attribute has
+already been decoded:
+
+.. code-block:: json
+
+  { "kind": "gre" }
+
+and we encounter the following attribute spec:
+
+.. code-block:: yaml
+
+  -
+    name: data
+    type: sub-message
+    sub-message: linkinfo-data-msg
+    selector: kind
+
+Then we look for a sub-message definition called ``linkinfo-data-msg`` and use
+the value of the ``kind`` attribute i.e. ``gre`` as the key to choose the
+correct format for the sub-message:
+
+.. code-block:: yaml
+
+  sub-messages:
+    name: linkinfo-data-msg
+    formats:
+      -
+        value: bridge
+        attribute-set: linkinfo-bridge-attrs
+      -
+        value: gre
+        attribute-set: linkinfo-gre-attrs
+      -
+        value: geneve
+        attribute-set: linkinfo-geneve-attrs
+
+This would decode the attribute value as a sub-message with the attribute-set
+called ``linkinfo-gre-attrs`` as the attribute space.
+
+A sub-message can have an optional ``fixed-header`` followed by zero or more
+attributes from an ``attribute-set``. For example the following
+``tc-options-msg`` sub-message defines message formats that use a mixture of
+``fixed-header``, ``attribute-set`` or both together:
+
+.. code-block:: yaml
+
+  sub-messages:
+    -
+      name: tc-options-msg
+      formats:
+        -
+          value: bfifo
+          fixed-header: tc-fifo-qopt
+        -
+          value: cake
+          attribute-set: tc-cake-attrs
+        -
+          value: netem
+          fixed-header: tc-netem-qopt
+          attribute-set: tc-netem-attrs
+
+Note that a selector attribute must appear in a netlink message before any
+sub-message attributes that depend on it.
+
+If an attribute such as ``kind`` is defined at more than one nest level, then a
+sub-message selector will be resolved using the value 'closest' to the selector.
+For example, if the same attribute name is defined in a nested ``attribute-set``
+alongside a sub-message selector and also in a top level ``attribute-set``, then
+the selector will be resolved using the value 'closest' to the selector. If the
+value is not present in the message at the same level as defined in the spec
+then this is an error.
+
+Nested struct definitions
+-------------------------
+
+Many raw netlink families such as :ref:`tc<netlink-tc>`
+make use of nested struct definitions. The ``netlink-raw`` schema makes it
+possible to embed a struct within a struct definition using the ``struct``
+property. For example, the following struct definition embeds the
+``tc-ratespec`` struct definition for both the ``rate`` and the ``peakrate``
+members of ``struct tc-tbf-qopt``.
+
+.. code-block:: yaml
+
+  -
+    name: tc-tbf-qopt
+    type: struct
+    members:
+      -
+        name: rate
+        type: binary
+        struct: tc-ratespec
+      -
+        name: peakrate
+        type: binary
+        struct: tc-ratespec
+      -
+        name: limit
+        type: u32
+      -
+        name: buffer
+        type: u32
+      -
+        name: mtu
+        type: u32