Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 116 insertions, 0 deletions

diff --git a/Documentation/userspace-api/gpio/chardev.rst b/Documentation/userspace-api/gpio/chardev.rst
new file mode 100644
index 000000000..c58dd9771
--- /dev/null
+++ b/Documentation/userspace-api/gpio/chardev.rst
@@ -0,0 +1,116 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================================
+GPIO Character Device Userspace API
+===================================
+
+This is latest version (v2) of the character device API, as defined in
+``include/uapi/linux/gpio.h.``
+
+First added in 5.10.
+
+.. note::
+   Do NOT abuse userspace APIs to control hardware that has proper kernel
+   drivers. There may already be a driver for your use case, and an existing
+   kernel driver is sure to provide a superior solution to bitbashing
+   from userspace.
+
+   Read Documentation/driver-api/gpio/drivers-on-gpio.rst to avoid reinventing
+   kernel wheels in userspace.
+
+   Similarly, for multi-function lines there may be other subsystems, such as
+   Documentation/spi/index.rst, Documentation/i2c/index.rst,
+   Documentation/driver-api/pwm.rst, Documentation/w1/index.rst etc, that
+   provide suitable drivers and APIs for your hardware.
+
+Basic examples using the character device API can be found in ``tools/gpio/*``.
+
+The API is based around two major objects, the :ref:`gpio-v2-chip` and the
+:ref:`gpio-v2-line-request`.
+
+.. _gpio-v2-chip:
+
+Chip
+====
+
+The Chip represents a single GPIO chip and is exposed to userspace using device
+files of the form ``/dev/gpiochipX``.
+
+Each chip supports a number of GPIO lines,
+:c:type:`chip.lines<gpiochip_info>`. Lines on the chip are identified by an
+``offset`` in the range from 0 to ``chip.lines - 1``, i.e. `[0,chip.lines)`.
+
+Lines are requested from the chip using gpio-v2-get-line-ioctl.rst
+and the resulting line request is used to access the GPIO chip's lines or
+monitor the lines for edge events.
+
+Within this documentation, the file descriptor returned by calling `open()`
+on the GPIO device file is referred to as ``chip_fd``.
+
+Operations
+----------
+
+The following operations may be performed on the chip:
+
+.. toctree::
+   :titlesonly:
+
+   Get Line <gpio-v2-get-line-ioctl>
+   Get Chip Info <gpio-get-chipinfo-ioctl>
+   Get Line Info <gpio-v2-get-lineinfo-ioctl>
+   Watch Line Info <gpio-v2-get-lineinfo-watch-ioctl>
+   Unwatch Line Info <gpio-get-lineinfo-unwatch-ioctl>
+   Read Line Info Changed Events <gpio-v2-lineinfo-changed-read>
+
+.. _gpio-v2-line-request:
+
+Line Request
+============
+
+Line requests are created by gpio-v2-get-line-ioctl.rst and provide
+access to a set of requested lines.  The line request is exposed to userspace
+via the anonymous file descriptor returned in
+:c:type:`request.fd<gpio_v2_line_request>` by gpio-v2-get-line-ioctl.rst.
+
+Within this documentation, the line request file descriptor is referred to
+as ``req_fd``.
+
+Operations
+----------
+
+The following operations may be performed on the line request:
+
+.. toctree::
+   :titlesonly:
+
+   Get Line Values <gpio-v2-line-get-values-ioctl>
+   Set Line Values <gpio-v2-line-set-values-ioctl>
+   Read Line Edge Events <gpio-v2-line-event-read>
+   Reconfigure Lines <gpio-v2-line-set-config-ioctl>
+
+Types
+=====
+
+This section contains the structs and enums that are referenced by the API v2,
+as defined in ``include/uapi/linux/gpio.h``.
+
+.. kernel-doc:: include/uapi/linux/gpio.h
+   :identifiers:
+    gpio_v2_line_attr_id
+    gpio_v2_line_attribute
+    gpio_v2_line_changed_type
+    gpio_v2_line_config
+    gpio_v2_line_config_attribute
+    gpio_v2_line_event
+    gpio_v2_line_event_id
+    gpio_v2_line_flag
+    gpio_v2_line_info
+    gpio_v2_line_info_changed
+    gpio_v2_line_request
+    gpio_v2_line_values
+    gpiochip_info
+
+.. toctree::
+   :hidden:
+
+   error-codes