x86/kprobes: Fix crash when probing CS CALL instructionsgrafted

When using eBPF to probe CS CALL instructions within a function,
a crash can be triggered.

The eBPF tool probes offset 257 of the __hrtimer_run_queues()
function:

<__hrtimer_run_queues+249>:  nopl   0x0(%rax,%rax,1)
<__hrtimer_run_queues+254>:  mov    %r14,%rdi
<__hrtimer_run_queues+257>:  cs call <__x86_indirect_thunk_r12>
<__hrtimer_run_queues+263>:  mov    %eax,%r12d
<__hrtimer_run_queues+266>:  xchg   %ax,%ax
<__hrtimer_run_queues+268>:  mov    %r13,%rdi

Which triggers this crash:

  BUG: unable to handle page fault for address: 00000000000f41c9
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 0 P4D 0
  Oops: 0002 [#1] SMP NOPTI
  CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P
  RIP: 0010:__hrtimer_run_queues+0x106/0x230

Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is
at the 6th byte of the above CS CALL instruction. Since the CS CALL
instruction occupies 6 bytes, the exception occurred in the middle of that
call instruction.

The root cause is that when using eBPF tools to probe in the middle of a
function, a kprobe with INT3 is used as the underlying implementation.

During single-step emulation of the original CALL instruction,
int3_emulate_call() assumes that the probed CALL instruction is 5 bytes
long. However, the actual CS-prefixed CALL instruction occupies 6 bytes,
so it constructs an incorrect exception return address. When the CPU
returns from the kprobe handler, the next instruction to be executed is at
the address of the last byte of that CS CALL instruction. Coincidentally,
starting from that address, the CPU fetches and decodes a completely
different instruction, which ultimately triggers a kernel crash.

Fix the issue by using the actual instruction length obtained from
the instruction decoder when constructing the exception return
address, rather than relying on the hardcoded CALL_INSN_SIZE macro.

[ mingo: Refined the changelog ]

Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000

1 files changed, 116 insertions, 0 deletions

diff --git a/Documentation/userspace-api/gpio/chardev.rst b/Documentation/userspace-api/gpio/chardev.rst
new file mode 100644
index 000000000..c58dd9771
--- /dev/null
+++ b/Documentation/userspace-api/gpio/chardev.rst
@@ -0,0 +1,116 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================================
+GPIO Character Device Userspace API
+===================================
+
+This is latest version (v2) of the character device API, as defined in
+``include/uapi/linux/gpio.h.``
+
+First added in 5.10.
+
+.. note::
+   Do NOT abuse userspace APIs to control hardware that has proper kernel
+   drivers. There may already be a driver for your use case, and an existing
+   kernel driver is sure to provide a superior solution to bitbashing
+   from userspace.
+
+   Read Documentation/driver-api/gpio/drivers-on-gpio.rst to avoid reinventing
+   kernel wheels in userspace.
+
+   Similarly, for multi-function lines there may be other subsystems, such as
+   Documentation/spi/index.rst, Documentation/i2c/index.rst,
+   Documentation/driver-api/pwm.rst, Documentation/w1/index.rst etc, that
+   provide suitable drivers and APIs for your hardware.
+
+Basic examples using the character device API can be found in ``tools/gpio/*``.
+
+The API is based around two major objects, the :ref:`gpio-v2-chip` and the
+:ref:`gpio-v2-line-request`.
+
+.. _gpio-v2-chip:
+
+Chip
+====
+
+The Chip represents a single GPIO chip and is exposed to userspace using device
+files of the form ``/dev/gpiochipX``.
+
+Each chip supports a number of GPIO lines,
+:c:type:`chip.lines<gpiochip_info>`. Lines on the chip are identified by an
+``offset`` in the range from 0 to ``chip.lines - 1``, i.e. `[0,chip.lines)`.
+
+Lines are requested from the chip using gpio-v2-get-line-ioctl.rst
+and the resulting line request is used to access the GPIO chip's lines or
+monitor the lines for edge events.
+
+Within this documentation, the file descriptor returned by calling `open()`
+on the GPIO device file is referred to as ``chip_fd``.
+
+Operations
+----------
+
+The following operations may be performed on the chip:
+
+.. toctree::
+   :titlesonly:
+
+   Get Line <gpio-v2-get-line-ioctl>
+   Get Chip Info <gpio-get-chipinfo-ioctl>
+   Get Line Info <gpio-v2-get-lineinfo-ioctl>
+   Watch Line Info <gpio-v2-get-lineinfo-watch-ioctl>
+   Unwatch Line Info <gpio-get-lineinfo-unwatch-ioctl>
+   Read Line Info Changed Events <gpio-v2-lineinfo-changed-read>
+
+.. _gpio-v2-line-request:
+
+Line Request
+============
+
+Line requests are created by gpio-v2-get-line-ioctl.rst and provide
+access to a set of requested lines.  The line request is exposed to userspace
+via the anonymous file descriptor returned in
+:c:type:`request.fd<gpio_v2_line_request>` by gpio-v2-get-line-ioctl.rst.
+
+Within this documentation, the line request file descriptor is referred to
+as ``req_fd``.
+
+Operations
+----------
+
+The following operations may be performed on the line request:
+
+.. toctree::
+   :titlesonly:
+
+   Get Line Values <gpio-v2-line-get-values-ioctl>
+   Set Line Values <gpio-v2-line-set-values-ioctl>
+   Read Line Edge Events <gpio-v2-line-event-read>
+   Reconfigure Lines <gpio-v2-line-set-config-ioctl>
+
+Types
+=====
+
+This section contains the structs and enums that are referenced by the API v2,
+as defined in ``include/uapi/linux/gpio.h``.
+
+.. kernel-doc:: include/uapi/linux/gpio.h
+   :identifiers:
+    gpio_v2_line_attr_id
+    gpio_v2_line_attribute
+    gpio_v2_line_changed_type
+    gpio_v2_line_config
+    gpio_v2_line_config_attribute
+    gpio_v2_line_event
+    gpio_v2_line_event_id
+    gpio_v2_line_flag
+    gpio_v2_line_info
+    gpio_v2_line_info_changed
+    gpio_v2_line_request
+    gpio_v2_line_values
+    gpiochip_info
+
+.. toctree::
+   :hidden:
+
+   error-codes