x86/kprobes: Fix crash when probing CS CALL instructionsgrafted

When using eBPF to probe CS CALL instructions within a function,
a crash can be triggered.

The eBPF tool probes offset 257 of the __hrtimer_run_queues()
function:

<__hrtimer_run_queues+249>:  nopl   0x0(%rax,%rax,1)
<__hrtimer_run_queues+254>:  mov    %r14,%rdi
<__hrtimer_run_queues+257>:  cs call <__x86_indirect_thunk_r12>
<__hrtimer_run_queues+263>:  mov    %eax,%r12d
<__hrtimer_run_queues+266>:  xchg   %ax,%ax
<__hrtimer_run_queues+268>:  mov    %r13,%rdi

Which triggers this crash:

  BUG: unable to handle page fault for address: 00000000000f41c9
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 0 P4D 0
  Oops: 0002 [#1] SMP NOPTI
  CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P
  RIP: 0010:__hrtimer_run_queues+0x106/0x230

Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is
at the 6th byte of the above CS CALL instruction. Since the CS CALL
instruction occupies 6 bytes, the exception occurred in the middle of that
call instruction.

The root cause is that when using eBPF tools to probe in the middle of a
function, a kprobe with INT3 is used as the underlying implementation.

During single-step emulation of the original CALL instruction,
int3_emulate_call() assumes that the probed CALL instruction is 5 bytes
long. However, the actual CS-prefixed CALL instruction occupies 6 bytes,
so it constructs an incorrect exception return address. When the CPU
returns from the kprobe handler, the next instruction to be executed is at
the address of the last byte of that CS CALL instruction. Coincidentally,
starting from that address, the CPU fetches and decodes a completely
different instruction, which ultimately triggers a kernel crash.

Fix the issue by using the actual instruction length obtained from
the instruction decoder when constructing the exception return
address, rather than relying on the hardcoded CALL_INSN_SIZE macro.

[ mingo: Refined the changelog ]

Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000

1 files changed, 179 insertions, 0 deletions

diff --git a/Documentation/userspace-api/accelerators/ocxl.rst b/Documentation/userspace-api/accelerators/ocxl.rst
new file mode 100644
index 000000000..4e213af70
--- /dev/null
+++ b/Documentation/userspace-api/accelerators/ocxl.rst
@@ -0,0 +1,179 @@
+========================================================
+OpenCAPI (Open Coherent Accelerator Processor Interface)
+========================================================
+
+OpenCAPI is an interface between processors and accelerators. It aims
+at being low-latency and high-bandwidth.
+
+The specification was developed by the OpenCAPI Consortium, and is now
+available from the `Compute Express Link Consortium
+<https://computeexpresslink.org/resource/opencapi-specification-archive/>`_.
+
+It allows an accelerator (which could be an FPGA, ASICs, ...) to access
+the host memory coherently, using virtual addresses. An OpenCAPI
+device can also host its own memory, that can be accessed from the
+host.
+
+OpenCAPI is known in linux as 'ocxl', as the open, processor-agnostic
+evolution of 'cxl' (the driver for the IBM CAPI interface for
+powerpc), which was named that way to avoid confusion with the ISDN
+CAPI subsystem.
+
+
+High-level view
+===============
+
+OpenCAPI defines a Data Link Layer (DL) and Transaction Layer (TL), to
+be implemented on top of a physical link. Any processor or device
+implementing the DL and TL can start sharing memory.
+
+::
+
+  +-----------+                         +-------------+
+  |           |                         |             |
+  |           |                         | Accelerated |
+  | Processor |                         |  Function   |
+  |           |  +--------+             |    Unit     |  +--------+
+  |           |--| Memory |             |    (AFU)    |--| Memory |
+  |           |  +--------+             |             |  +--------+
+  +-----------+                         +-------------+
+       |                                       |
+  +-----------+                         +-------------+
+  |    TL     |                         |    TLX      |
+  +-----------+                         +-------------+
+       |                                       |
+  +-----------+                         +-------------+
+  |    DL     |                         |    DLX      |
+  +-----------+                         +-------------+
+       |                                       |
+       |                   PHY                 |
+       +---------------------------------------+
+
+
+
+Device discovery
+================
+
+OpenCAPI relies on a PCI-like configuration space, implemented on the
+device. So the host can discover AFUs by querying the config space.
+
+OpenCAPI devices in Linux are treated like PCI devices (with a few
+caveats). The firmware is expected to abstract the hardware as if it
+was a PCI link. A lot of the existing PCI infrastructure is reused:
+devices are scanned and BARs are assigned during the standard PCI
+enumeration. Commands like 'lspci' can therefore be used to see what
+devices are available.
+
+The configuration space defines the AFU(s) that can be found on the
+physical adapter, such as its name, how many memory contexts it can
+work with, the size of its MMIO areas, ...
+
+
+
+MMIO
+====
+
+OpenCAPI defines two MMIO areas for each AFU:
+
+* the global MMIO area, with registers pertinent to the whole AFU.
+* a per-process MMIO area, which has a fixed size for each context.
+
+
+
+AFU interrupts
+==============
+
+OpenCAPI includes the possibility for an AFU to send an interrupt to a
+host process. It is done through a 'intrp_req' defined in the
+Transaction Layer, specifying a 64-bit object handle which defines the
+interrupt.
+
+The driver allows a process to allocate an interrupt and obtain its
+64-bit object handle, that can be passed to the AFU.
+
+
+
+char devices
+============
+
+The driver creates one char device per AFU found on the physical
+device. A physical device may have multiple functions and each
+function can have multiple AFUs. At the time of this writing though,
+it has only been tested with devices exporting only one AFU.
+
+Char devices can be found in /dev/ocxl/ and are named as:
+/dev/ocxl/<AFU name>.<location>.<index>
+
+where <AFU name> is a max 20-character long name, as found in the
+config space of the AFU.
+<location> is added by the driver and can help distinguish devices
+when a system has more than one instance of the same OpenCAPI device.
+<index> is also to help distinguish AFUs in the unlikely case where a
+device carries multiple copies of the same AFU.
+
+
+
+Sysfs class
+===========
+
+An ocxl class is added for the devices representing the AFUs. See
+/sys/class/ocxl. The layout is described in
+Documentation/ABI/testing/sysfs-class-ocxl
+
+
+
+User API
+========
+
+open
+----
+
+Based on the AFU definition found in the config space, an AFU may
+support working with more than one memory context, in which case the
+associated char device may be opened multiple times by different
+processes.
+
+
+ioctl
+-----
+
+OCXL_IOCTL_ATTACH:
+
+  Attach the memory context of the calling process to the AFU so that
+  the AFU can access its memory.
+
+OCXL_IOCTL_IRQ_ALLOC:
+
+  Allocate an AFU interrupt and return an identifier.
+
+OCXL_IOCTL_IRQ_FREE:
+
+  Free a previously allocated AFU interrupt.
+
+OCXL_IOCTL_IRQ_SET_FD:
+
+  Associate an event fd to an AFU interrupt so that the user process
+  can be notified when the AFU sends an interrupt.
+
+OCXL_IOCTL_GET_METADATA:
+
+  Obtains configuration information from the card, such at the size of
+  MMIO areas, the AFU version, and the PASID for the current context.
+
+OCXL_IOCTL_ENABLE_P9_WAIT:
+
+  Allows the AFU to wake a userspace thread executing 'wait'. Returns
+  information to userspace to allow it to configure the AFU. Note that
+  this is only available on POWER9.
+
+OCXL_IOCTL_GET_FEATURES:
+
+  Reports on which CPU features that affect OpenCAPI are usable from
+  userspace.
+
+
+mmap
+----
+
+A process can mmap the per-process MMIO area for interactions with the
+AFU.