x86/kprobes: Fix crash when probing CS CALL instructionsgrafted

When using eBPF to probe CS CALL instructions within a function,
a crash can be triggered.

The eBPF tool probes offset 257 of the __hrtimer_run_queues()
function:

<__hrtimer_run_queues+249>:  nopl   0x0(%rax,%rax,1)
<__hrtimer_run_queues+254>:  mov    %r14,%rdi
<__hrtimer_run_queues+257>:  cs call <__x86_indirect_thunk_r12>
<__hrtimer_run_queues+263>:  mov    %eax,%r12d
<__hrtimer_run_queues+266>:  xchg   %ax,%ax
<__hrtimer_run_queues+268>:  mov    %r13,%rdi

Which triggers this crash:

  BUG: unable to handle page fault for address: 00000000000f41c9
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 0 P4D 0
  Oops: 0002 [#1] SMP NOPTI
  CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P
  RIP: 0010:__hrtimer_run_queues+0x106/0x230

Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is
at the 6th byte of the above CS CALL instruction. Since the CS CALL
instruction occupies 6 bytes, the exception occurred in the middle of that
call instruction.

The root cause is that when using eBPF tools to probe in the middle of a
function, a kprobe with INT3 is used as the underlying implementation.

During single-step emulation of the original CALL instruction,
int3_emulate_call() assumes that the probed CALL instruction is 5 bytes
long. However, the actual CS-prefixed CALL instruction occupies 6 bytes,
so it constructs an incorrect exception return address. When the CPU
returns from the kprobe handler, the next instruction to be executed is at
the address of the last byte of that CS CALL instruction. Coincidentally,
starting from that address, the CPU fetches and decodes a completely
different instruction, which ultimately triggers a kernel crash.

Fix the issue by using the actual instruction length obtained from
the instruction decoder when constructing the exception return
address, rather than relying on the hardcoded CALL_INSN_SIZE macro.

[ mingo: Refined the changelog ]

Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000

1 files changed, 132 insertions, 0 deletions

diff --git a/Documentation/usb/acm.rst b/Documentation/usb/acm.rst
new file mode 100644
index 000000000..e8bda98e9
--- /dev/null
+++ b/Documentation/usb/acm.rst
@@ -0,0 +1,132 @@
+======================
+Linux ACM driver v0.16
+======================
+
+Copyright (c) 1999 Vojtech Pavlik <vojtech@suse.cz>
+
+Sponsored by SuSE
+
+0. Disclaimer
+~~~~~~~~~~~~~
+This program is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the Free
+Software Foundation; either version 2 of the License, or (at your option)
+any later version.
+
+This program is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+more details.
+
+You should have received a copy of the GNU General Public License along
+with this program; if not, write to the Free Software Foundation, Inc., 59
+Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+Should you need to contact me, the author, you can do so either by e-mail -
+mail your message to <vojtech@suse.cz>, or by paper mail: Vojtech Pavlik,
+Ucitelska 1576, Prague 8, 182 00 Czech Republic
+
+For your convenience, the GNU General Public License version 2 is included
+in the package: See the file COPYING.
+
+1. Usage
+~~~~~~~~
+The drivers/usb/class/cdc-acm.c drivers works with USB modems and USB ISDN terminal
+adapters that conform to the Universal Serial Bus Communication Device Class
+Abstract Control Model (USB CDC ACM) specification.
+
+Many modems do, here is a list of those I know of:
+
+	- 3Com OfficeConnect 56k
+	- 3Com Voice FaxModem Pro
+	- 3Com Sportster
+	- MultiTech MultiModem 56k
+	- Zoom 2986L FaxModem
+	- Compaq 56k FaxModem
+	- ELSA Microlink 56k
+
+I know of one ISDN TA that does work with the acm driver:
+
+	- 3Com USR ISDN Pro TA
+
+Some cell phones also connect via USB. I know the following phones work:
+
+	- SonyEricsson K800i
+
+Unfortunately many modems and most ISDN TAs use proprietary interfaces and
+thus won't work with this drivers. Check for ACM compliance before buying.
+
+To use the modems you need these modules loaded::
+
+	usbcore.ko
+	uhci-hcd.ko ohci-hcd.ko or ehci-hcd.ko
+	cdc-acm.ko
+
+After that, the modem[s] should be accessible. You should be able to use
+minicom, ppp and mgetty with them.
+
+2. Verifying that it works
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The first step would be to check /sys/kernel/debug/usb/devices, it should look
+like this::
+
+  T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
+  B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
+  D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
+  P:  Vendor=0000 ProdID=0000 Rev= 0.00
+  S:  Product=USB UHCI Root Hub
+  S:  SerialNumber=6800
+  C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
+  I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
+  E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
+  T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
+  D:  Ver= 1.00 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs=  2
+  P:  Vendor=04c1 ProdID=008f Rev= 2.07
+  S:  Manufacturer=3Com Inc.
+  S:  Product=3Com U.S. Robotics Pro ISDN TA
+  S:  SerialNumber=UFT53A49BVT7
+  C:  #Ifs= 1 Cfg#= 1 Atr=60 MxPwr=  0mA
+  I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=acm
+  E:  Ad=85(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
+  E:  Ad=04(O) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
+  E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=128ms
+  C:* #Ifs= 2 Cfg#= 2 Atr=60 MxPwr=  0mA
+  I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm
+  E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=128ms
+  I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm
+  E:  Ad=85(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
+  E:  Ad=04(O) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
+
+The presence of these three lines (and the Cls= 'comm' and 'data' classes)
+is important, it means it's an ACM device. The Driver=acm means the acm
+driver is used for the device. If you see only Cls=ff(vend.) then you're out
+of luck, you have a device with vendor specific-interface::
+
+  D:  Ver= 1.00 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs=  2
+  I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm
+  I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm
+
+In the system log you should see::
+
+  usb.c: USB new device connect, assigned device number 2
+  usb.c: kmalloc IF c7691fa0, numif 1
+  usb.c: kmalloc IF c7b5f3e0, numif 2
+  usb.c: skipped 4 class/vendor specific interface descriptors
+  usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3
+  usb.c: USB device number 2 default language ID 0x409
+  Manufacturer: 3Com Inc.
+  Product: 3Com U.S. Robotics Pro ISDN TA
+  SerialNumber: UFT53A49BVT7
+  acm.c: probing config 1
+  acm.c: probing config 2
+  ttyACM0: USB ACM device
+  acm.c: acm_control_msg: rq: 0x22 val: 0x0 len: 0x0 result: 0
+  acm.c: acm_control_msg: rq: 0x20 val: 0x0 len: 0x7 result: 7
+  usb.c: acm driver claimed interface c7b5f3e0
+  usb.c: acm driver claimed interface c7b5f3f8
+  usb.c: acm driver claimed interface c7691fa0
+
+If all this seems to be OK, fire up minicom and set it to talk to the ttyACM
+device and try typing 'at'. If it responds with 'OK', then everything is
+working.