x86/kprobes: Fix crash when probing CS CALL instructionsgrafted

When using eBPF to probe CS CALL instructions within a function,
a crash can be triggered.

The eBPF tool probes offset 257 of the __hrtimer_run_queues()
function:

<__hrtimer_run_queues+249>:  nopl   0x0(%rax,%rax,1)
<__hrtimer_run_queues+254>:  mov    %r14,%rdi
<__hrtimer_run_queues+257>:  cs call <__x86_indirect_thunk_r12>
<__hrtimer_run_queues+263>:  mov    %eax,%r12d
<__hrtimer_run_queues+266>:  xchg   %ax,%ax
<__hrtimer_run_queues+268>:  mov    %r13,%rdi

Which triggers this crash:

  BUG: unable to handle page fault for address: 00000000000f41c9
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 0 P4D 0
  Oops: 0002 [#1] SMP NOPTI
  CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P
  RIP: 0010:__hrtimer_run_queues+0x106/0x230

Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is
at the 6th byte of the above CS CALL instruction. Since the CS CALL
instruction occupies 6 bytes, the exception occurred in the middle of that
call instruction.

The root cause is that when using eBPF tools to probe in the middle of a
function, a kprobe with INT3 is used as the underlying implementation.

During single-step emulation of the original CALL instruction,
int3_emulate_call() assumes that the probed CALL instruction is 5 bytes
long. However, the actual CS-prefixed CALL instruction occupies 6 bytes,
so it constructs an incorrect exception return address. When the CPU
returns from the kprobe handler, the next instruction to be executed is at
the address of the last byte of that CS CALL instruction. Coincidentally,
starting from that address, the CPU fetches and decodes a completely
different instruction, which ultimately triggers a kernel crash.

Fix the issue by using the actual instruction length obtained from
the instruction decoder when constructing the exception return
address, rather than relying on the hardcoded CALL_INSN_SIZE macro.

[ mingo: Refined the changelog ]

Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000

1 files changed, 106 insertions, 0 deletions

diff --git a/Documentation/trace/ring-buffer-map.rst b/Documentation/trace/ring-buffer-map.rst
new file mode 100644
index 000000000..8e296bcc0
--- /dev/null
+++ b/Documentation/trace/ring-buffer-map.rst
@@ -0,0 +1,106 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================================
+Tracefs ring-buffer memory mapping
+==================================
+
+:Author: Vincent Donnefort <vdonnefort@google.com>
+
+Overview
+========
+Tracefs ring-buffer memory map provides an efficient method to stream data
+as no memory copy is necessary. The application mapping the ring-buffer becomes
+then a consumer for that ring-buffer, in a similar fashion to trace_pipe.
+
+Memory mapping setup
+====================
+The mapping works with a mmap() of the trace_pipe_raw interface.
+
+The first system page of the mapping contains ring-buffer statistics and
+description. It is referred to as the meta-page. One of the most important
+fields of the meta-page is the reader. It contains the sub-buffer ID which can
+be safely read by the mapper (see ring-buffer-design.rst).
+
+The meta-page is followed by all the sub-buffers, ordered by ascending ID. It is
+therefore effortless to know where the reader starts in the mapping:
+
+.. code-block:: c
+
+        reader_id = meta->reader->id;
+        reader_offset = meta->meta_page_size + reader_id * meta->subbuf_size;
+
+When the application is done with the current reader, it can get a new one using
+the trace_pipe_raw ioctl() TRACE_MMAP_IOCTL_GET_READER. This ioctl also updates
+the meta-page fields.
+
+Limitations
+===========
+When a mapping is in place on a Tracefs ring-buffer, it is not possible to
+either resize it (either by increasing the entire size of the ring-buffer or
+each subbuf). It is also not possible to use snapshot and causes splice to copy
+the ring buffer data instead of using the copyless swap from the ring buffer.
+
+Concurrent readers (either another application mapping that ring-buffer or the
+kernel with trace_pipe) are allowed but not recommended. They will compete for
+the ring-buffer and the output is unpredictable, just like concurrent readers on
+trace_pipe would be.
+
+Example
+=======
+
+.. code-block:: c
+
+        #include <fcntl.h>
+        #include <stdio.h>
+        #include <stdlib.h>
+        #include <unistd.h>
+
+        #include <linux/trace_mmap.h>
+
+        #include <sys/mman.h>
+        #include <sys/ioctl.h>
+
+        #define TRACE_PIPE_RAW "/sys/kernel/tracing/per_cpu/cpu0/trace_pipe_raw"
+
+        int main(void)
+        {
+                int page_size = getpagesize(), fd, reader_id;
+                unsigned long meta_len, data_len;
+                struct trace_buffer_meta *meta;
+                void *map, *reader, *data;
+
+                fd = open(TRACE_PIPE_RAW, O_RDONLY | O_NONBLOCK);
+                if (fd < 0)
+                        exit(EXIT_FAILURE);
+
+                map = mmap(NULL, page_size, PROT_READ, MAP_SHARED, fd, 0);
+                if (map == MAP_FAILED)
+                        exit(EXIT_FAILURE);
+
+                meta = (struct trace_buffer_meta *)map;
+                meta_len = meta->meta_page_size;
+
+                printf("entries:        %llu\n", meta->entries);
+                printf("overrun:        %llu\n", meta->overrun);
+                printf("read:           %llu\n", meta->read);
+                printf("nr_subbufs:     %u\n", meta->nr_subbufs);
+
+                data_len = meta->subbuf_size * meta->nr_subbufs;
+                data = mmap(NULL, data_len, PROT_READ, MAP_SHARED, fd, meta_len);
+                if (data == MAP_FAILED)
+                        exit(EXIT_FAILURE);
+
+                if (ioctl(fd, TRACE_MMAP_IOCTL_GET_READER) < 0)
+                        exit(EXIT_FAILURE);
+
+                reader_id = meta->reader.id;
+                reader = data + meta->subbuf_size * reader_id;
+
+                printf("Current reader address: %p\n", reader);
+
+                munmap(data, data_len);
+                munmap(meta, meta_len);
+                close (fd);
+
+                return 0;
+        }