Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 66 insertions, 0 deletions

diff --git a/Documentation/trace/remotes.rst b/Documentation/trace/remotes.rst
new file mode 100644
index 000000000..1f9d764f6
--- /dev/null
+++ b/Documentation/trace/remotes.rst
@@ -0,0 +1,66 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============
+Tracing Remotes
+===============
+
+:Author: Vincent Donnefort <vdonnefort@google.com>
+
+Overview
+========
+Firmware and hypervisors are black boxes to the kernel. Having a way to see what
+they are doing can be useful to debug both. This is where remote tracing buffers
+come in. A remote tracing buffer is a ring buffer executed by the firmware or
+hypervisor into memory that is memory mapped to the host kernel. This is similar
+to how user space memory maps the kernel ring buffer but in this case the kernel
+is acting like user space and the firmware or hypervisor is the "kernel" side.
+With a trace remote ring buffer, the firmware and hypervisor can record events
+for which the host kernel can see and expose to user space.
+
+Register a remote
+=================
+A remote must provide a set of callbacks `struct trace_remote_callbacks` whom
+description can be found below. Those callbacks allows Tracefs to enable and
+disable tracing and events, to load and unload a tracing buffer (a set of
+ring-buffers) and to swap a reader page with the head page, which enables
+consuming reading.
+
+.. kernel-doc:: include/linux/trace_remote.h
+
+Once registered, an instance will appear for this remote in the Tracefs
+directory **remotes/**. Buffers can then be read using the usual Tracefs files
+**trace_pipe** and **trace**.
+
+Declare a remote event
+======================
+Macros are provided to ease the declaration of remote events, in a similar
+fashion to in-kernel events. A declaration must provide an ID, a description of
+the event arguments and how to print the event:
+
+.. code-block:: c
+
+	REMOTE_EVENT(foo, EVENT_FOO_ID,
+		RE_STRUCT(
+			re_field(u64, bar)
+		),
+		RE_PRINTK("bar=%lld", __entry->bar)
+	);
+
+Then those events must be declared in a C file with the following:
+
+.. code-block:: c
+
+	#define REMOTE_EVENT_INCLUDE_FILE foo_events.h
+	#include <trace/define_remote_events.h>
+
+This will provide a `struct remote_event remote_event_foo` that can be given to
+`trace_remote_register`.
+
+Registered events appear in the remote directory under **events/**.
+
+Simple ring-buffer
+==================
+A simple implementation for a ring-buffer writer can be found in
+kernel/trace/simple_ring_buffer.c.
+
+.. kernel-doc:: include/linux/simple_ring_buffer.h