drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

3 files changed, 1207 insertions, 0 deletions

diff --git a/Documentation/trace/postprocess/decode_msr.py b/Documentation/trace/postprocess/decode_msr.py
new file mode 100644
index 000000000..f5609b16f
--- /dev/null
+++ b/Documentation/trace/postprocess/decode_msr.py
@@ -0,0 +1,37 @@
+#!/usr/bin/env python
+# add symbolic names to read_msr / write_msr in trace
+# decode_msr msr-index.h < trace
+import sys
+import re
+
+msrs = dict()
+
+with open(sys.argv[1] if len(sys.argv) > 1 else "msr-index.h", "r") as f:
+	for j in f:
+		m = re.match(r'#define (MSR_\w+)\s+(0x[0-9a-fA-F]+)', j)
+		if m:
+			msrs[int(m.group(2), 16)] = m.group(1)
+
+extra_ranges = (
+	( "MSR_LASTBRANCH_%d_FROM_IP", 0x680, 0x69F ),
+	( "MSR_LASTBRANCH_%d_TO_IP", 0x6C0, 0x6DF ),
+	( "LBR_INFO_%d", 0xdc0, 0xddf ),
+)
+
+for j in sys.stdin:
+	m = re.search(r'(read|write)_msr:\s+([0-9a-f]+)', j)
+	if m:
+		r = None
+		num = int(m.group(2), 16)
+		if num in msrs:
+			r = msrs[num]
+		else:
+			for er in extra_ranges:
+				if er[1] <= num <= er[2]:
+					r = er[0] % (num - er[1],)
+					break
+		if r:
+			j = j.replace(" " + m.group(2), " " + r + "(" + m.group(2) + ")")
+	print(j)
+
+
diff --git a/Documentation/trace/postprocess/trace-pagealloc-postprocess.pl b/Documentation/trace/postprocess/trace-pagealloc-postprocess.pl
new file mode 100644
index 000000000..d16494c5e
--- /dev/null
+++ b/Documentation/trace/postprocess/trace-pagealloc-postprocess.pl
@@ -0,0 +1,418 @@
+#!/usr/bin/env perl
+# This is a POC (proof of concept or piece of crap, take your pick) for reading the
+# text representation of trace output related to page allocation. It makes an attempt
+# to extract some high-level information on what is going on. The accuracy of the parser
+# may vary considerably
+#
+# Example usage: trace-pagealloc-postprocess.pl < /sys/kernel/tracing/trace_pipe
+# other options
+#   --prepend-parent	Report on the parent proc and PID
+#   --read-procstat	If the trace lacks process info, get it from /proc
+#   --ignore-pid	Aggregate processes of the same name together
+#
+# Copyright (c) IBM Corporation 2009
+# Author: Mel Gorman <mel@csn.ul.ie>
+use strict;
+use Getopt::Long;
+
+# Tracepoint events
+use constant MM_PAGE_ALLOC		=> 1;
+use constant MM_PAGE_FREE		=> 2;
+use constant MM_PAGE_FREE_BATCHED	=> 3;
+use constant MM_PAGE_PCPU_DRAIN		=> 4;
+use constant MM_PAGE_ALLOC_ZONE_LOCKED	=> 5;
+use constant MM_PAGE_ALLOC_EXTFRAG	=> 6;
+use constant EVENT_UNKNOWN		=> 7;
+
+# Constants used to track state
+use constant STATE_PCPU_PAGES_DRAINED	=> 8;
+use constant STATE_PCPU_PAGES_REFILLED	=> 9;
+
+# High-level events extrapolated from tracepoints
+use constant HIGH_PCPU_DRAINS		=> 10;
+use constant HIGH_PCPU_REFILLS		=> 11;
+use constant HIGH_EXT_FRAGMENT		=> 12;
+use constant HIGH_EXT_FRAGMENT_SEVERE	=> 13;
+use constant HIGH_EXT_FRAGMENT_MODERATE	=> 14;
+use constant HIGH_EXT_FRAGMENT_CHANGED	=> 15;
+
+my %perprocesspid;
+my %perprocess;
+my $opt_ignorepid;
+my $opt_read_procstat;
+my $opt_prepend_parent;
+
+# Catch sigint and exit on request
+my $sigint_report = 0;
+my $sigint_exit = 0;
+my $sigint_pending = 0;
+my $sigint_received = 0;
+sub sigint_handler {
+	my $current_time = time;
+	if ($current_time - 2 > $sigint_received) {
+		print "SIGINT received, report pending. Hit ctrl-c again to exit\n";
+		$sigint_report = 1;
+	} else {
+		if (!$sigint_exit) {
+			print "Second SIGINT received quickly, exiting\n";
+		}
+		$sigint_exit++;
+	}
+
+	if ($sigint_exit > 3) {
+		print "Many SIGINTs received, exiting now without report\n";
+		exit;
+	}
+
+	$sigint_received = $current_time;
+	$sigint_pending = 1;
+}
+$SIG{INT} = "sigint_handler";
+
+# Parse command line options
+GetOptions(
+	'ignore-pid'	 =>	\$opt_ignorepid,
+	'read-procstat'	 =>	\$opt_read_procstat,
+	'prepend-parent' =>	\$opt_prepend_parent,
+);
+
+# Defaults for dynamically discovered regex's
+my $regex_fragdetails_default = 'page=([0-9a-f]*) pfn=([0-9]*) alloc_order=([-0-9]*) fallback_order=([-0-9]*) pageblock_order=([-0-9]*) alloc_migratetype=([-0-9]*) fallback_migratetype=([-0-9]*) fragmenting=([-0-9]) change_ownership=([-0-9])';
+
+# Dyanically discovered regex
+my $regex_fragdetails;
+
+# Static regex used. Specified like this for readability and for use with /o
+#                      (process_pid)     (cpus      )   ( time  )   (tpoint    ) (details)
+my $regex_traceevent = '\s*([a-zA-Z0-9-]*)\s*(\[[0-9]*\])\s*([0-9.]*):\s*([a-zA-Z_]*):\s*(.*)';
+my $regex_statname = '[-0-9]*\s\((.*)\).*';
+my $regex_statppid = '[-0-9]*\s\(.*\)\s[A-Za-z]\s([0-9]*).*';
+
+sub generate_traceevent_regex {
+	my $event = shift;
+	my $default = shift;
+	my $regex;
+
+	# Read the event format or use the default
+	if (!open (FORMAT, "/sys/kernel/tracing/events/$event/format")) {
+		$regex = $default;
+	} else {
+		my $line;
+		while (!eof(FORMAT)) {
+			$line = <FORMAT>;
+			if ($line =~ /^print fmt:\s"(.*)",.*/) {
+				$regex = $1;
+				$regex =~ s/%p/\([0-9a-f]*\)/g;
+				$regex =~ s/%d/\([-0-9]*\)/g;
+				$regex =~ s/%lu/\([0-9]*\)/g;
+			}
+		}
+	}
+
+	# Verify fields are in the right order
+	my $tuple;
+	foreach $tuple (split /\s/, $regex) {
+		my ($key, $value) = split(/=/, $tuple);
+		my $expected = shift;
+		if ($key ne $expected) {
+			print("WARNING: Format not as expected '$key' != '$expected'");
+			$regex =~ s/$key=\((.*)\)/$key=$1/;
+		}
+	}
+
+	if (defined shift) {
+		die("Fewer fields than expected in format");
+	}
+
+	return $regex;
+}
+$regex_fragdetails = generate_traceevent_regex("kmem/mm_page_alloc_extfrag",
+			$regex_fragdetails_default,
+			"page", "pfn",
+			"alloc_order", "fallback_order", "pageblock_order",
+			"alloc_migratetype", "fallback_migratetype",
+			"fragmenting", "change_ownership");
+
+sub read_statline($) {
+	my $pid = $_[0];
+	my $statline;
+
+	if (open(STAT, "/proc/$pid/stat")) {
+		$statline = <STAT>;
+		close(STAT);
+	}
+
+	if ($statline eq '') {
+		$statline = "-1 (UNKNOWN_PROCESS_NAME) R 0";
+	}
+
+	return $statline;
+}
+
+sub guess_process_pid($$) {
+	my $pid = $_[0];
+	my $statline = $_[1];
+
+	if ($pid == 0) {
+		return "swapper-0";
+	}
+
+	if ($statline !~ /$regex_statname/o) {
+		die("Failed to math stat line for process name :: $statline");
+	}
+	return "$1-$pid";
+}
+
+sub parent_info($$) {
+	my $pid = $_[0];
+	my $statline = $_[1];
+	my $ppid;
+
+	if ($pid == 0) {
+		return "NOPARENT-0";
+	}
+
+	if ($statline !~ /$regex_statppid/o) {
+		die("Failed to match stat line process ppid:: $statline");
+	}
+
+	# Read the ppid stat line
+	$ppid = $1;
+	return guess_process_pid($ppid, read_statline($ppid));
+}
+
+sub process_events {
+	my $traceevent;
+	my $process_pid;
+	my $cpus;
+	my $timestamp;
+	my $tracepoint;
+	my $details;
+	my $statline;
+
+	# Read each line of the event log
+EVENT_PROCESS:
+	while ($traceevent = <STDIN>) {
+		if ($traceevent =~ /$regex_traceevent/o) {
+			$process_pid = $1;
+			$tracepoint = $4;
+
+			if ($opt_read_procstat || $opt_prepend_parent) {
+				$process_pid =~ /(.*)-([0-9]*)$/;
+				my $process = $1;
+				my $pid = $2;
+
+				$statline = read_statline($pid);
+
+				if ($opt_read_procstat && $process eq '') {
+					$process_pid = guess_process_pid($pid, $statline);
+				}
+
+				if ($opt_prepend_parent) {
+					$process_pid = parent_info($pid, $statline) . " :: $process_pid";
+				}
+			}
+
+			# Unnecessary in this script. Uncomment if required
+			# $cpus = $2;
+			# $timestamp = $3;
+		} else {
+			next;
+		}
+
+		# Perl Switch() sucks majorly
+		if ($tracepoint eq "mm_page_alloc") {
+			$perprocesspid{$process_pid}->{MM_PAGE_ALLOC}++;
+		} elsif ($tracepoint eq "mm_page_free") {
+			$perprocesspid{$process_pid}->{MM_PAGE_FREE}++
+		} elsif ($tracepoint eq "mm_page_free_batched") {
+			$perprocesspid{$process_pid}->{MM_PAGE_FREE_BATCHED}++;
+		} elsif ($tracepoint eq "mm_page_pcpu_drain") {
+			$perprocesspid{$process_pid}->{MM_PAGE_PCPU_DRAIN}++;
+			$perprocesspid{$process_pid}->{STATE_PCPU_PAGES_DRAINED}++;
+		} elsif ($tracepoint eq "mm_page_alloc_zone_locked") {
+			$perprocesspid{$process_pid}->{MM_PAGE_ALLOC_ZONE_LOCKED}++;
+			$perprocesspid{$process_pid}->{STATE_PCPU_PAGES_REFILLED}++;
+		} elsif ($tracepoint eq "mm_page_alloc_extfrag") {
+
+			# Extract the details of the event now
+			$details = $5;
+
+			my ($page, $pfn);
+			my ($alloc_order, $fallback_order, $pageblock_order);
+			my ($alloc_migratetype, $fallback_migratetype);
+			my ($fragmenting, $change_ownership);
+
+			if ($details !~ /$regex_fragdetails/o) {
+				print "WARNING: Failed to parse mm_page_alloc_extfrag as expected\n";
+				next;
+			}
+
+			$perprocesspid{$process_pid}->{MM_PAGE_ALLOC_EXTFRAG}++;
+			$page = $1;
+			$pfn = $2;
+			$alloc_order = $3;
+			$fallback_order = $4;
+			$pageblock_order = $5;
+			$alloc_migratetype = $6;
+			$fallback_migratetype = $7;
+			$fragmenting = $8;
+			$change_ownership = $9;
+
+			if ($fragmenting) {
+				$perprocesspid{$process_pid}->{HIGH_EXT_FRAG}++;
+				if ($fallback_order <= 3) {
+					$perprocesspid{$process_pid}->{HIGH_EXT_FRAGMENT_SEVERE}++;
+				} else {
+					$perprocesspid{$process_pid}->{HIGH_EXT_FRAGMENT_MODERATE}++;
+				}
+			}
+			if ($change_ownership) {
+				$perprocesspid{$process_pid}->{HIGH_EXT_FRAGMENT_CHANGED}++;
+			}
+		} else {
+			$perprocesspid{$process_pid}->{EVENT_UNKNOWN}++;
+		}
+
+		# Catch a full pcpu drain event
+		if ($perprocesspid{$process_pid}->{STATE_PCPU_PAGES_DRAINED} &&
+				$tracepoint ne "mm_page_pcpu_drain") {
+
+			$perprocesspid{$process_pid}->{HIGH_PCPU_DRAINS}++;
+			$perprocesspid{$process_pid}->{STATE_PCPU_PAGES_DRAINED} = 0;
+		}
+
+		# Catch a full pcpu refill event
+		if ($perprocesspid{$process_pid}->{STATE_PCPU_PAGES_REFILLED} &&
+				$tracepoint ne "mm_page_alloc_zone_locked") {
+			$perprocesspid{$process_pid}->{HIGH_PCPU_REFILLS}++;
+			$perprocesspid{$process_pid}->{STATE_PCPU_PAGES_REFILLED} = 0;
+		}
+
+		if ($sigint_pending) {
+			last EVENT_PROCESS;
+		}
+	}
+}
+
+sub dump_stats {
+	my $hashref = shift;
+	my %stats = %$hashref;
+
+	# Dump per-process stats
+	my $process_pid;
+	my $max_strlen = 0;
+
+	# Get the maximum process name
+	foreach $process_pid (keys %perprocesspid) {
+		my $len = length($process_pid);
+		if ($len > $max_strlen) {
+			$max_strlen = $len;
+		}
+	}
+	$max_strlen += 2;
+
+	printf("\n");
+	printf("%-" . $max_strlen . "s %8s %10s   %8s %8s   %8s %8s %8s   %8s %8s %8s %8s %8s %8s\n",
+		"Process", "Pages",  "Pages",      "Pages", "Pages", "PCPU",  "PCPU",   "PCPU",    "Fragment",  "Fragment", "MigType", "Fragment", "Fragment", "Unknown");
+	printf("%-" . $max_strlen . "s %8s %10s   %8s %8s   %8s %8s %8s   %8s %8s %8s %8s %8s %8s\n",
+		"details", "allocd", "allocd",     "freed", "freed", "pages", "drains", "refills", "Fallback", "Causing",   "Changed", "Severe", "Moderate", "");
+
+	printf("%-" . $max_strlen . "s %8s %10s   %8s %8s   %8s %8s %8s   %8s %8s %8s %8s %8s %8s\n",
+		"",        "",       "under lock", "direct", "pagevec", "drain", "", "", "", "", "", "", "", "");
+
+	foreach $process_pid (keys %stats) {
+		# Dump final aggregates
+		if ($stats{$process_pid}->{STATE_PCPU_PAGES_DRAINED}) {
+			$stats{$process_pid}->{HIGH_PCPU_DRAINS}++;
+			$stats{$process_pid}->{STATE_PCPU_PAGES_DRAINED} = 0;
+		}
+		if ($stats{$process_pid}->{STATE_PCPU_PAGES_REFILLED}) {
+			$stats{$process_pid}->{HIGH_PCPU_REFILLS}++;
+			$stats{$process_pid}->{STATE_PCPU_PAGES_REFILLED} = 0;
+		}
+
+		printf("%-" . $max_strlen . "s %8d %10d   %8d %8d   %8d %8d %8d   %8d %8d %8d %8d %8d %8d\n",
+			$process_pid,
+			$stats{$process_pid}->{MM_PAGE_ALLOC},
+			$stats{$process_pid}->{MM_PAGE_ALLOC_ZONE_LOCKED},
+			$stats{$process_pid}->{MM_PAGE_FREE},
+			$stats{$process_pid}->{MM_PAGE_FREE_BATCHED},
+			$stats{$process_pid}->{MM_PAGE_PCPU_DRAIN},
+			$stats{$process_pid}->{HIGH_PCPU_DRAINS},
+			$stats{$process_pid}->{HIGH_PCPU_REFILLS},
+			$stats{$process_pid}->{MM_PAGE_ALLOC_EXTFRAG},
+			$stats{$process_pid}->{HIGH_EXT_FRAG},
+			$stats{$process_pid}->{HIGH_EXT_FRAGMENT_CHANGED},
+			$stats{$process_pid}->{HIGH_EXT_FRAGMENT_SEVERE},
+			$stats{$process_pid}->{HIGH_EXT_FRAGMENT_MODERATE},
+			$stats{$process_pid}->{EVENT_UNKNOWN});
+	}
+}
+
+sub aggregate_perprocesspid() {
+	my $process_pid;
+	my $process;
+	undef %perprocess;
+
+	foreach $process_pid (keys %perprocesspid) {
+		$process = $process_pid;
+		$process =~ s/-([0-9])*$//;
+		if ($process eq '') {
+			$process = "NO_PROCESS_NAME";
+		}
+
+		$perprocess{$process}->{MM_PAGE_ALLOC} += $perprocesspid{$process_pid}->{MM_PAGE_ALLOC};
+		$perprocess{$process}->{MM_PAGE_ALLOC_ZONE_LOCKED} += $perprocesspid{$process_pid}->{MM_PAGE_ALLOC_ZONE_LOCKED};
+		$perprocess{$process}->{MM_PAGE_FREE} += $perprocesspid{$process_pid}->{MM_PAGE_FREE};
+		$perprocess{$process}->{MM_PAGE_FREE_BATCHED} += $perprocesspid{$process_pid}->{MM_PAGE_FREE_BATCHED};
+		$perprocess{$process}->{MM_PAGE_PCPU_DRAIN} += $perprocesspid{$process_pid}->{MM_PAGE_PCPU_DRAIN};
+		$perprocess{$process}->{HIGH_PCPU_DRAINS} += $perprocesspid{$process_pid}->{HIGH_PCPU_DRAINS};
+		$perprocess{$process}->{HIGH_PCPU_REFILLS} += $perprocesspid{$process_pid}->{HIGH_PCPU_REFILLS};
+		$perprocess{$process}->{MM_PAGE_ALLOC_EXTFRAG} += $perprocesspid{$process_pid}->{MM_PAGE_ALLOC_EXTFRAG};
+		$perprocess{$process}->{HIGH_EXT_FRAG} += $perprocesspid{$process_pid}->{HIGH_EXT_FRAG};
+		$perprocess{$process}->{HIGH_EXT_FRAGMENT_CHANGED} += $perprocesspid{$process_pid}->{HIGH_EXT_FRAGMENT_CHANGED};
+		$perprocess{$process}->{HIGH_EXT_FRAGMENT_SEVERE} += $perprocesspid{$process_pid}->{HIGH_EXT_FRAGMENT_SEVERE};
+		$perprocess{$process}->{HIGH_EXT_FRAGMENT_MODERATE} += $perprocesspid{$process_pid}->{HIGH_EXT_FRAGMENT_MODERATE};
+		$perprocess{$process}->{EVENT_UNKNOWN} += $perprocesspid{$process_pid}->{EVENT_UNKNOWN};
+	}
+}
+
+sub report() {
+	if (!$opt_ignorepid) {
+		dump_stats(\%perprocesspid);
+	} else {
+		aggregate_perprocesspid();
+		dump_stats(\%perprocess);
+	}
+}
+
+# Process events or signals until neither is available
+sub signal_loop() {
+	my $sigint_processed;
+	do {
+		$sigint_processed = 0;
+		process_events();
+
+		# Handle pending signals if any
+		if ($sigint_pending) {
+			my $current_time = time;
+
+			if ($sigint_exit) {
+				print "Received exit signal\n";
+				$sigint_pending = 0;
+			}
+			if ($sigint_report) {
+				if ($current_time >= $sigint_received + 2) {
+					report();
+					$sigint_report = 0;
+					$sigint_pending = 0;
+					$sigint_processed = 1;
+				}
+			}
+		}
+	} while ($sigint_pending || $sigint_processed);
+}
+
+signal_loop();
+report();
diff --git a/Documentation/trace/postprocess/trace-vmscan-postprocess.pl b/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
new file mode 100644
index 000000000..048dc0dbc
--- /dev/null
+++ b/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
@@ -0,0 +1,752 @@
+#!/usr/bin/env perl
+# This is a POC for reading the text representation of trace output related to
+# page reclaim. It makes an attempt to extract some high-level information on
+# what is going on. The accuracy of the parser may vary
+#
+# Example usage: trace-vmscan-postprocess.pl < /sys/kernel/tracing/trace_pipe
+# other options
+#   --read-procstat	If the trace lacks process info, get it from /proc
+#   --ignore-pid	Aggregate processes of the same name together
+#
+# Copyright (c) IBM Corporation 2009
+# Author: Mel Gorman <mel@csn.ul.ie>
+use strict;
+use Getopt::Long;
+
+# Tracepoint events
+use constant MM_VMSCAN_DIRECT_RECLAIM_BEGIN	=> 1;
+use constant MM_VMSCAN_DIRECT_RECLAIM_END	=> 2;
+use constant MM_VMSCAN_KSWAPD_WAKE		=> 3;
+use constant MM_VMSCAN_KSWAPD_SLEEP		=> 4;
+use constant MM_VMSCAN_LRU_SHRINK_ACTIVE	=> 5;
+use constant MM_VMSCAN_LRU_SHRINK_INACTIVE	=> 6;
+use constant MM_VMSCAN_LRU_ISOLATE		=> 7;
+use constant MM_VMSCAN_WRITEPAGE_FILE_SYNC	=> 8;
+use constant MM_VMSCAN_WRITEPAGE_ANON_SYNC	=> 9;
+use constant MM_VMSCAN_WRITEPAGE_FILE_ASYNC	=> 10;
+use constant MM_VMSCAN_WRITEPAGE_ANON_ASYNC	=> 11;
+use constant MM_VMSCAN_WRITEPAGE_ASYNC		=> 12;
+use constant EVENT_UNKNOWN			=> 13;
+
+# Per-order events
+use constant MM_VMSCAN_DIRECT_RECLAIM_BEGIN_PERORDER => 11;
+use constant MM_VMSCAN_WAKEUP_KSWAPD_PERORDER 	=> 12;
+use constant MM_VMSCAN_KSWAPD_WAKE_PERORDER	=> 13;
+use constant HIGH_KSWAPD_REWAKEUP_PERORDER	=> 14;
+
+# Constants used to track state
+use constant STATE_DIRECT_BEGIN 		=> 15;
+use constant STATE_DIRECT_ORDER 		=> 16;
+use constant STATE_KSWAPD_BEGIN			=> 17;
+use constant STATE_KSWAPD_ORDER			=> 18;
+
+# High-level events extrapolated from tracepoints
+use constant HIGH_DIRECT_RECLAIM_LATENCY	=> 19;
+use constant HIGH_KSWAPD_LATENCY		=> 20;
+use constant HIGH_KSWAPD_REWAKEUP		=> 21;
+use constant HIGH_NR_SCANNED			=> 22;
+use constant HIGH_NR_TAKEN			=> 23;
+use constant HIGH_NR_RECLAIMED			=> 24;
+use constant HIGH_NR_FILE_SCANNED		=> 25;
+use constant HIGH_NR_ANON_SCANNED		=> 26;
+use constant HIGH_NR_FILE_RECLAIMED		=> 27;
+use constant HIGH_NR_ANON_RECLAIMED		=> 28;
+
+my %perprocesspid;
+my %perprocess;
+my %last_procmap;
+my $opt_ignorepid;
+my $opt_read_procstat;
+
+my $total_wakeup_kswapd;
+my ($total_direct_reclaim, $total_direct_nr_scanned);
+my ($total_direct_nr_file_scanned, $total_direct_nr_anon_scanned);
+my ($total_direct_latency, $total_kswapd_latency);
+my ($total_direct_nr_reclaimed);
+my ($total_direct_nr_file_reclaimed, $total_direct_nr_anon_reclaimed);
+my ($total_direct_writepage_file_sync, $total_direct_writepage_file_async);
+my ($total_direct_writepage_anon_sync, $total_direct_writepage_anon_async);
+my ($total_kswapd_nr_scanned, $total_kswapd_wake);
+my ($total_kswapd_nr_file_scanned, $total_kswapd_nr_anon_scanned);
+my ($total_kswapd_writepage_file_sync, $total_kswapd_writepage_file_async);
+my ($total_kswapd_writepage_anon_sync, $total_kswapd_writepage_anon_async);
+my ($total_kswapd_nr_reclaimed);
+my ($total_kswapd_nr_file_reclaimed, $total_kswapd_nr_anon_reclaimed);
+
+# Catch sigint and exit on request
+my $sigint_report = 0;
+my $sigint_exit = 0;
+my $sigint_pending = 0;
+my $sigint_received = 0;
+sub sigint_handler {
+	my $current_time = time;
+	if ($current_time - 2 > $sigint_received) {
+		print "SIGINT received, report pending. Hit ctrl-c again to exit\n";
+		$sigint_report = 1;
+	} else {
+		if (!$sigint_exit) {
+			print "Second SIGINT received quickly, exiting\n";
+		}
+		$sigint_exit++;
+	}
+
+	if ($sigint_exit > 3) {
+		print "Many SIGINTs received, exiting now without report\n";
+		exit;
+	}
+
+	$sigint_received = $current_time;
+	$sigint_pending = 1;
+}
+$SIG{INT} = "sigint_handler";
+
+# Parse command line options
+GetOptions(
+	'ignore-pid'	 =>	\$opt_ignorepid,
+	'read-procstat'	 =>	\$opt_read_procstat,
+);
+
+# Defaults for dynamically discovered regex's
+my $regex_direct_begin_default = 'order=([0-9]*) gfp_flags=([A-Z_|]*)';
+my $regex_direct_end_default = 'nr_reclaimed=([0-9]*)';
+my $regex_kswapd_wake_default = 'nid=([0-9]*) order=([0-9]*)';
+my $regex_kswapd_sleep_default = 'nid=([0-9]*)';
+my $regex_wakeup_kswapd_default = 'nid=([0-9]*) order=([0-9]*) gfp_flags=([A-Z_|]*)';
+my $regex_lru_isolate_default = 'classzone=([0-9]*) order=([0-9]*) nr_requested=([0-9]*) nr_scanned=([0-9]*) nr_skipped=([0-9]*) nr_taken=([0-9]*) lru=([a-z_]*)';
+my $regex_lru_shrink_inactive_default = 'nid=([0-9]*) nr_scanned=([0-9]*) nr_reclaimed=([0-9]*) nr_dirty=([0-9]*) nr_writeback=([0-9]*) nr_congested=([0-9]*) nr_immediate=([0-9]*) nr_activate_anon=([0-9]*) nr_activate_file=([0-9]*) nr_ref_keep=([0-9]*) nr_unmap_fail=([0-9]*) priority=([0-9]*) flags=([A-Z_|]*)';
+my $regex_lru_shrink_active_default = 'lru=([A-Z_]*) nr_taken=([0-9]*) nr_active=([0-9]*) nr_deactivated=([0-9]*) nr_referenced=([0-9]*) priority=([0-9]*) flags=([A-Z_|]*)' ;
+my $regex_writepage_default = 'page=([0-9a-f]*) pfn=([0-9]*) flags=([A-Z_|]*)';
+
+# Dyanically discovered regex
+my $regex_direct_begin;
+my $regex_direct_end;
+my $regex_kswapd_wake;
+my $regex_kswapd_sleep;
+my $regex_wakeup_kswapd;
+my $regex_lru_isolate;
+my $regex_lru_shrink_inactive;
+my $regex_lru_shrink_active;
+my $regex_writepage;
+
+# Static regex used. Specified like this for readability and for use with /o
+#                      (process_pid)     (cpus      )   ( time  )   (tpoint    ) (details)
+my $regex_traceevent = '\s*([a-zA-Z0-9-]*)\s*(\[[0-9]*\])(\s*[dX.][Nnp.][Hhs.][0-9a-fA-F.]*|)\s*([0-9.]*):\s*([a-zA-Z_]*):\s*(.*)';
+my $regex_statname = '[-0-9]*\s\((.*)\).*';
+my $regex_statppid = '[-0-9]*\s\(.*\)\s[A-Za-z]\s([0-9]*).*';
+
+sub generate_traceevent_regex {
+	my $event = shift;
+	my $default = shift;
+	my $regex;
+
+	# Read the event format or use the default
+	if (!open (FORMAT, "/sys/kernel/tracing/events/$event/format")) {
+		print("WARNING: Event $event format string not found\n");
+		return $default;
+	} else {
+		my $line;
+		while (!eof(FORMAT)) {
+			$line = <FORMAT>;
+			$line =~ s/, REC->.*//;
+			if ($line =~ /^print fmt:\s"(.*)".*/) {
+				$regex = $1;
+				$regex =~ s/%s/\([0-9a-zA-Z|_]*\)/g;
+				$regex =~ s/%p/\([0-9a-f]*\)/g;
+				$regex =~ s/%d/\([-0-9]*\)/g;
+				$regex =~ s/%ld/\([-0-9]*\)/g;
+				$regex =~ s/%lu/\([0-9]*\)/g;
+			}
+		}
+	}
+
+	# Can't handle the print_flags stuff but in the context of this
+	# script, it really doesn't matter
+	$regex =~ s/\(REC.*\) \? __print_flags.*//;
+
+	# Verify fields are in the right order
+	my $tuple;
+	foreach $tuple (split /\s/, $regex) {
+		my ($key, $value) = split(/=/, $tuple);
+		my $expected = shift;
+		if ($key ne $expected) {
+			print("WARNING: Format not as expected for event $event '$key' != '$expected'\n");
+			$regex =~ s/$key=\((.*)\)/$key=$1/;
+		}
+	}
+
+	if (defined shift) {
+		die("Fewer fields than expected in format");
+	}
+
+	return $regex;
+}
+
+$regex_direct_begin = generate_traceevent_regex(
+			"vmscan/mm_vmscan_direct_reclaim_begin",
+			$regex_direct_begin_default,
+			"order", "gfp_flags");
+$regex_direct_end = generate_traceevent_regex(
+			"vmscan/mm_vmscan_direct_reclaim_end",
+			$regex_direct_end_default,
+			"nr_reclaimed");
+$regex_kswapd_wake = generate_traceevent_regex(
+			"vmscan/mm_vmscan_kswapd_wake",
+			$regex_kswapd_wake_default,
+			"nid", "order");
+$regex_kswapd_sleep = generate_traceevent_regex(
+			"vmscan/mm_vmscan_kswapd_sleep",
+			$regex_kswapd_sleep_default,
+			"nid");
+$regex_wakeup_kswapd = generate_traceevent_regex(
+			"vmscan/mm_vmscan_wakeup_kswapd",
+			$regex_wakeup_kswapd_default,
+			"nid", "order", "gfp_flags");
+$regex_lru_isolate = generate_traceevent_regex(
+			"vmscan/mm_vmscan_lru_isolate",
+			$regex_lru_isolate_default,
+			"classzone", "order",
+			"nr_requested", "nr_scanned", "nr_skipped", "nr_taken",
+			"lru");
+$regex_lru_shrink_inactive = generate_traceevent_regex(
+			"vmscan/mm_vmscan_lru_shrink_inactive",
+			$regex_lru_shrink_inactive_default,
+			"nid", "nr_scanned", "nr_reclaimed", "nr_dirty", "nr_writeback",
+			"nr_congested", "nr_immediate", "nr_activate_anon",
+			"nr_activate_file", "nr_ref_keep",
+			"nr_unmap_fail", "priority", "flags");
+$regex_lru_shrink_active = generate_traceevent_regex(
+			"vmscan/mm_vmscan_lru_shrink_active",
+			$regex_lru_shrink_active_default,
+			"nid", "nr_taken", "nr_active", "nr_deactivated", "nr_referenced",
+			"priority", "flags");
+$regex_writepage = generate_traceevent_regex(
+			"vmscan/mm_vmscan_write_folio",
+			$regex_writepage_default,
+			"page", "pfn", "flags");
+
+sub read_statline($) {
+	my $pid = $_[0];
+	my $statline;
+
+	if (open(STAT, "/proc/$pid/stat")) {
+		$statline = <STAT>;
+		close(STAT);
+	}
+
+	if ($statline eq '') {
+		$statline = "-1 (UNKNOWN_PROCESS_NAME) R 0";
+	}
+
+	return $statline;
+}
+
+sub guess_process_pid($$) {
+	my $pid = $_[0];
+	my $statline = $_[1];
+
+	if ($pid == 0) {
+		return "swapper-0";
+	}
+
+	if ($statline !~ /$regex_statname/o) {
+		die("Failed to math stat line for process name :: $statline");
+	}
+	return "$1-$pid";
+}
+
+# Convert sec.usec timestamp format
+sub timestamp_to_ms($) {
+	my $timestamp = $_[0];
+
+	my ($sec, $usec) = split (/\./, $timestamp);
+	return ($sec * 1000) + ($usec / 1000);
+}
+
+sub process_events {
+	my $traceevent;
+	my $process_pid;
+	my $cpus;
+	my $timestamp;
+	my $tracepoint;
+	my $details;
+	my $statline;
+
+	# Read each line of the event log
+EVENT_PROCESS:
+	while ($traceevent = <STDIN>) {
+		if ($traceevent =~ /$regex_traceevent/o) {
+			$process_pid = $1;
+			$timestamp = $4;
+			$tracepoint = $5;
+
+			$process_pid =~ /(.*)-([0-9]*)$/;
+			my $process = $1;
+			my $pid = $2;
+
+			if ($process eq "") {
+				$process = $last_procmap{$pid};
+				$process_pid = "$process-$pid";
+			}
+			$last_procmap{$pid} = $process;
+
+			if ($opt_read_procstat) {
+				$statline = read_statline($pid);
+				if ($opt_read_procstat && $process eq '') {
+					$process_pid = guess_process_pid($pid, $statline);
+				}
+			}
+		} else {
+			next;
+		}
+
+		# Perl Switch() sucks majorly
+		if ($tracepoint eq "mm_vmscan_direct_reclaim_begin") {
+			$timestamp = timestamp_to_ms($timestamp);
+			$perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN}++;
+			$perprocesspid{$process_pid}->{STATE_DIRECT_BEGIN} = $timestamp;
+
+			$details = $6;
+			if ($details !~ /$regex_direct_begin/o) {
+				print "WARNING: Failed to parse mm_vmscan_direct_reclaim_begin as expected\n";
+				print "         $details\n";
+				print "         $regex_direct_begin\n";
+				next;
+			}
+			my $order = $1;
+			$perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN_PERORDER}[$order]++;
+			$perprocesspid{$process_pid}->{STATE_DIRECT_ORDER} = $order;
+		} elsif ($tracepoint eq "mm_vmscan_direct_reclaim_end") {
+			# Count the event itself
+			my $index = $perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_END};
+			$perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_END}++;
+
+			# Record how long direct reclaim took this time
+			if (defined $perprocesspid{$process_pid}->{STATE_DIRECT_BEGIN}) {
+				$timestamp = timestamp_to_ms($timestamp);
+				my $order = $perprocesspid{$process_pid}->{STATE_DIRECT_ORDER};
+				my $latency = ($timestamp - $perprocesspid{$process_pid}->{STATE_DIRECT_BEGIN});
+				$perprocesspid{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index] = "$order-$latency";
+			}
+		} elsif ($tracepoint eq "mm_vmscan_kswapd_wake") {
+			$details = $6;
+			if ($details !~ /$regex_kswapd_wake/o) {
+				print "WARNING: Failed to parse mm_vmscan_kswapd_wake as expected\n";
+				print "         $details\n";
+				print "         $regex_kswapd_wake\n";
+				next;
+			}
+
+			my $order = $2;
+			$perprocesspid{$process_pid}->{STATE_KSWAPD_ORDER} = $order;
+			if (!$perprocesspid{$process_pid}->{STATE_KSWAPD_BEGIN}) {
+				$timestamp = timestamp_to_ms($timestamp);
+				$perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE}++;
+				$perprocesspid{$process_pid}->{STATE_KSWAPD_BEGIN} = $timestamp;
+				$perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE_PERORDER}[$order]++;
+			} else {
+				$perprocesspid{$process_pid}->{HIGH_KSWAPD_REWAKEUP}++;
+				$perprocesspid{$process_pid}->{HIGH_KSWAPD_REWAKEUP_PERORDER}[$order]++;
+			}
+		} elsif ($tracepoint eq "mm_vmscan_kswapd_sleep") {
+
+			# Count the event itself
+			my $index = $perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_SLEEP};
+			$perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_SLEEP}++;
+
+			# Record how long kswapd was awake
+			$timestamp = timestamp_to_ms($timestamp);
+			my $order = $perprocesspid{$process_pid}->{STATE_KSWAPD_ORDER};
+			my $latency = ($timestamp - $perprocesspid{$process_pid}->{STATE_KSWAPD_BEGIN});
+			$perprocesspid{$process_pid}->{HIGH_KSWAPD_LATENCY}[$index] = "$order-$latency";
+			$perprocesspid{$process_pid}->{STATE_KSWAPD_BEGIN} = 0;
+		} elsif ($tracepoint eq "mm_vmscan_wakeup_kswapd") {
+			$perprocesspid{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD}++;
+
+			$details = $6;
+			if ($details !~ /$regex_wakeup_kswapd/o) {
+				print "WARNING: Failed to parse mm_vmscan_wakeup_kswapd as expected\n";
+				print "         $details\n";
+				print "         $regex_wakeup_kswapd\n";
+				next;
+			}
+			my $order = $2;
+			$perprocesspid{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD_PERORDER}[$order]++;
+		} elsif ($tracepoint eq "mm_vmscan_lru_isolate") {
+			$details = $6;
+			if ($details !~ /$regex_lru_isolate/o) {
+				print "WARNING: Failed to parse mm_vmscan_lru_isolate as expected\n";
+				print "         $details\n";
+				print "         $regex_lru_isolate/o\n";
+				next;
+			}
+			my $nr_scanned = $4;
+			my $lru = $7;
+
+			# To closer match vmstat scanning statistics, only count
+			# inactive lru as scanning
+			if ($lru =~ /inactive_/) {
+				$perprocesspid{$process_pid}->{HIGH_NR_SCANNED} += $nr_scanned;
+				if ($lru =~ /_file/) {
+					$perprocesspid{$process_pid}->{HIGH_NR_FILE_SCANNED} += $nr_scanned;
+				} else {
+					$perprocesspid{$process_pid}->{HIGH_NR_ANON_SCANNED} += $nr_scanned;
+				}
+			}
+		} elsif ($tracepoint eq "mm_vmscan_lru_shrink_inactive") {
+			$details = $6;
+			if ($details !~ /$regex_lru_shrink_inactive/o) {
+				print "WARNING: Failed to parse mm_vmscan_lru_shrink_inactive as expected\n";
+				print "         $details\n";
+				print "         $regex_lru_shrink_inactive/o\n";
+				next;
+			}
+
+			my $nr_reclaimed = $3;
+			my $flags = $13;
+			my $file = 0;
+			if ($flags =~ /RECLAIM_WB_FILE/) {
+				$file = 1;
+			}
+			$perprocesspid{$process_pid}->{HIGH_NR_RECLAIMED} += $nr_reclaimed;
+			if ($file) {
+				$perprocesspid{$process_pid}->{HIGH_NR_FILE_RECLAIMED} += $nr_reclaimed;
+			} else {
+				$perprocesspid{$process_pid}->{HIGH_NR_ANON_RECLAIMED} += $nr_reclaimed;
+			}
+		} elsif ($tracepoint eq "mm_vmscan_writepage") {
+			$details = $6;
+			if ($details !~ /$regex_writepage/o) {
+				print "WARNING: Failed to parse mm_vmscan_writepage as expected\n";
+				print "         $details\n";
+				print "         $regex_writepage\n";
+				next;
+			}
+
+			my $flags = $3;
+			my $file = 0;
+			my $sync_io = 0;
+			if ($flags =~ /RECLAIM_WB_FILE/) {
+				$file = 1;
+			}
+			if ($flags =~ /RECLAIM_WB_SYNC/) {
+				$sync_io = 1;
+			}
+			if ($sync_io) {
+				if ($file) {
+					$perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC}++;
+				} else {
+					$perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC}++;
+				}
+			} else {
+				if ($file) {
+					$perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC}++;
+				} else {
+					$perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC}++;
+				}
+			}
+		} else {
+			$perprocesspid{$process_pid}->{EVENT_UNKNOWN}++;
+		}
+
+		if ($sigint_pending) {
+			last EVENT_PROCESS;
+		}
+	}
+}
+
+sub dump_stats {
+	my $hashref = shift;
+	my %stats = %$hashref;
+
+	# Dump per-process stats
+	my $process_pid;
+	my $max_strlen = 0;
+
+	# Get the maximum process name
+	foreach $process_pid (keys %perprocesspid) {
+		my $len = length($process_pid);
+		if ($len > $max_strlen) {
+			$max_strlen = $len;
+		}
+	}
+	$max_strlen += 2;
+
+	# Work out latencies
+	printf("\n") if !$opt_ignorepid;
+	printf("Reclaim latencies expressed as order-latency_in_ms\n") if !$opt_ignorepid;
+	foreach $process_pid (keys %stats) {
+
+		if (!$stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[0] &&
+				!$stats{$process_pid}->{HIGH_KSWAPD_LATENCY}[0]) {
+			next;
+		}
+
+		printf "%-" . $max_strlen . "s ", $process_pid if !$opt_ignorepid;
+		my $index = 0;
+		while (defined $stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index] ||
+			defined $stats{$process_pid}->{HIGH_KSWAPD_LATENCY}[$index]) {
+
+			if ($stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index]) {
+				printf("%s ", $stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index]) if !$opt_ignorepid;
+				my ($dummy, $latency) = split(/-/, $stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index]);
+				$total_direct_latency += $latency;
+			} else {
+				printf("%s ", $stats{$process_pid}->{HIGH_KSWAPD_LATENCY}[$index]) if !$opt_ignorepid;
+				my ($dummy, $latency) = split(/-/, $stats{$process_pid}->{HIGH_KSWAPD_LATENCY}[$index]);
+				$total_kswapd_latency += $latency;
+			}
+			$index++;
+		}
+		print "\n" if !$opt_ignorepid;
+	}
+
+	# Print out process activity
+	printf("\n");
+	printf("%-" . $max_strlen . "s %8s %10s   %8s %8s  %8s %8s %8s %8s\n", "Process", "Direct",  "Wokeup", "Pages",   "Pages",   "Pages",   "Pages",     "Time");
+	printf("%-" . $max_strlen . "s %8s %10s   %8s %8s  %8s %8s %8s %8s\n", "details", "Rclms",   "Kswapd", "Scanned", "Rclmed",  "Sync-IO", "ASync-IO",  "Stalled");
+	foreach $process_pid (keys %stats) {
+
+		if (!$stats{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN}) {
+			next;
+		}
+
+		$total_direct_reclaim += $stats{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN};
+		$total_wakeup_kswapd += $stats{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD};
+		$total_direct_nr_scanned += $stats{$process_pid}->{HIGH_NR_SCANNED};
+		$total_direct_nr_file_scanned += $stats{$process_pid}->{HIGH_NR_FILE_SCANNED};
+		$total_direct_nr_anon_scanned += $stats{$process_pid}->{HIGH_NR_ANON_SCANNED};
+		$total_direct_nr_reclaimed += $stats{$process_pid}->{HIGH_NR_RECLAIMED};
+		$total_direct_nr_file_reclaimed += $stats{$process_pid}->{HIGH_NR_FILE_RECLAIMED};
+		$total_direct_nr_anon_reclaimed += $stats{$process_pid}->{HIGH_NR_ANON_RECLAIMED};
+		$total_direct_writepage_file_sync += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC};
+		$total_direct_writepage_anon_sync += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC};
+		$total_direct_writepage_file_async += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC};
+
+		$total_direct_writepage_anon_async += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC};
+
+		my $index = 0;
+		my $this_reclaim_delay = 0;
+		while (defined $stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index]) {
+			 my ($dummy, $latency) = split(/-/, $stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index]);
+			$this_reclaim_delay += $latency;
+			$index++;
+		}
+
+		printf("%-" . $max_strlen . "s %8d %10d   %8u %8u  %8u %8u %8.3f",
+			$process_pid,
+			$stats{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN},
+			$stats{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD},
+			$stats{$process_pid}->{HIGH_NR_SCANNED},
+			$stats{$process_pid}->{HIGH_NR_FILE_SCANNED},
+			$stats{$process_pid}->{HIGH_NR_ANON_SCANNED},
+			$stats{$process_pid}->{HIGH_NR_RECLAIMED},
+			$stats{$process_pid}->{HIGH_NR_FILE_RECLAIMED},
+			$stats{$process_pid}->{HIGH_NR_ANON_RECLAIMED},
+			$stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC} + $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC},
+			$stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC} + $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC},
+			$this_reclaim_delay / 1000);
+
+		if ($stats{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN}) {
+			print "      ";
+			for (my $order = 0; $order < 20; $order++) {
+				my $count = $stats{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN_PERORDER}[$order];
+				if ($count != 0) {
+					print "direct-$order=$count ";
+				}
+			}
+		}
+		if ($stats{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD}) {
+			print "      ";
+			for (my $order = 0; $order < 20; $order++) {
+				my $count = $stats{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD_PERORDER}[$order];
+				if ($count != 0) {
+					print "wakeup-$order=$count ";
+				}
+			}
+		}
+
+		print "\n";
+	}
+
+	# Print out kswapd activity
+	printf("\n");
+	printf("%-" . $max_strlen . "s %8s %10s   %8s   %8s %8s %8s\n", "Kswapd",   "Kswapd",  "Order",     "Pages",   "Pages",   "Pages",  "Pages");
+	printf("%-" . $max_strlen . "s %8s %10s   %8s   %8s %8s %8s\n", "Instance", "Wakeups", "Re-wakeup", "Scanned", "Rclmed",  "Sync-IO", "ASync-IO");
+	foreach $process_pid (keys %stats) {
+
+		if (!$stats{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE}) {
+			next;
+		}
+
+		$total_kswapd_wake += $stats{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE};
+		$total_kswapd_nr_scanned += $stats{$process_pid}->{HIGH_NR_SCANNED};
+		$total_kswapd_nr_file_scanned += $stats{$process_pid}->{HIGH_NR_FILE_SCANNED};
+		$total_kswapd_nr_anon_scanned += $stats{$process_pid}->{HIGH_NR_ANON_SCANNED};
+		$total_kswapd_nr_reclaimed += $stats{$process_pid}->{HIGH_NR_RECLAIMED};
+		$total_kswapd_nr_file_reclaimed += $stats{$process_pid}->{HIGH_NR_FILE_RECLAIMED};
+		$total_kswapd_nr_anon_reclaimed += $stats{$process_pid}->{HIGH_NR_ANON_RECLAIMED};
+		$total_kswapd_writepage_file_sync += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC};
+		$total_kswapd_writepage_anon_sync += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC};
+		$total_kswapd_writepage_file_async += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC};
+		$total_kswapd_writepage_anon_async += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC};
+
+		printf("%-" . $max_strlen . "s %8d %10d   %8u %8u  %8i %8u",
+			$process_pid,
+			$stats{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE},
+			$stats{$process_pid}->{HIGH_KSWAPD_REWAKEUP},
+			$stats{$process_pid}->{HIGH_NR_SCANNED},
+			$stats{$process_pid}->{HIGH_NR_FILE_SCANNED},
+			$stats{$process_pid}->{HIGH_NR_ANON_SCANNED},
+			$stats{$process_pid}->{HIGH_NR_RECLAIMED},
+			$stats{$process_pid}->{HIGH_NR_FILE_RECLAIMED},
+			$stats{$process_pid}->{HIGH_NR_ANON_RECLAIMED},
+			$stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC} + $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC},
+			$stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC} + $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC});
+
+		if ($stats{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE}) {
+			print "      ";
+			for (my $order = 0; $order < 20; $order++) {
+				my $count = $stats{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE_PERORDER}[$order];
+				if ($count != 0) {
+					print "wake-$order=$count ";
+				}
+			}
+		}
+		if ($stats{$process_pid}->{HIGH_KSWAPD_REWAKEUP}) {
+			print "      ";
+			for (my $order = 0; $order < 20; $order++) {
+				my $count = $stats{$process_pid}->{HIGH_KSWAPD_REWAKEUP_PERORDER}[$order];
+				if ($count != 0) {
+					print "rewake-$order=$count ";
+				}
+			}
+		}
+		printf("\n");
+	}
+
+	# Print out summaries
+	$total_direct_latency /= 1000;
+	$total_kswapd_latency /= 1000;
+	print "\nSummary\n";
+	print "Direct reclaims:     			$total_direct_reclaim\n";
+	print "Direct reclaim pages scanned:		$total_direct_nr_scanned\n";
+	print "Direct reclaim file pages scanned:	$total_direct_nr_file_scanned\n";
+	print "Direct reclaim anon pages scanned:	$total_direct_nr_anon_scanned\n";
+	print "Direct reclaim pages reclaimed:		$total_direct_nr_reclaimed\n";
+	print "Direct reclaim file pages reclaimed:	$total_direct_nr_file_reclaimed\n";
+	print "Direct reclaim anon pages reclaimed:	$total_direct_nr_anon_reclaimed\n";
+	print "Direct reclaim write file sync I/O:	$total_direct_writepage_file_sync\n";
+	print "Direct reclaim write anon sync I/O:	$total_direct_writepage_anon_sync\n";
+	print "Direct reclaim write file async I/O:	$total_direct_writepage_file_async\n";
+	print "Direct reclaim write anon async I/O:	$total_direct_writepage_anon_async\n";
+	print "Wake kswapd requests:			$total_wakeup_kswapd\n";
+	printf "Time stalled direct reclaim: 		%-1.2f seconds\n", $total_direct_latency;
+	print "\n";
+	print "Kswapd wakeups:				$total_kswapd_wake\n";
+	print "Kswapd pages scanned:			$total_kswapd_nr_scanned\n";
+	print "Kswapd file pages scanned:		$total_kswapd_nr_file_scanned\n";
+	print "Kswapd anon pages scanned:		$total_kswapd_nr_anon_scanned\n";
+	print "Kswapd pages reclaimed:			$total_kswapd_nr_reclaimed\n";
+	print "Kswapd file pages reclaimed:		$total_kswapd_nr_file_reclaimed\n";
+	print "Kswapd anon pages reclaimed:		$total_kswapd_nr_anon_reclaimed\n";
+	print "Kswapd reclaim write file sync I/O:	$total_kswapd_writepage_file_sync\n";
+	print "Kswapd reclaim write anon sync I/O:	$total_kswapd_writepage_anon_sync\n";
+	print "Kswapd reclaim write file async I/O:	$total_kswapd_writepage_file_async\n";
+	print "Kswapd reclaim write anon async I/O:	$total_kswapd_writepage_anon_async\n";
+	printf "Time kswapd awake:			%-1.2f seconds\n", $total_kswapd_latency;
+}
+
+sub aggregate_perprocesspid() {
+	my $process_pid;
+	my $process;
+	undef %perprocess;
+
+	foreach $process_pid (keys %perprocesspid) {
+		$process = $process_pid;
+		$process =~ s/-([0-9])*$//;
+		if ($process eq '') {
+			$process = "NO_PROCESS_NAME";
+		}
+
+		$perprocess{$process}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN} += $perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN};
+		$perprocess{$process}->{MM_VMSCAN_KSWAPD_WAKE} += $perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE};
+		$perprocess{$process}->{MM_VMSCAN_WAKEUP_KSWAPD} += $perprocesspid{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD};
+		$perprocess{$process}->{HIGH_KSWAPD_REWAKEUP} += $perprocesspid{$process_pid}->{HIGH_KSWAPD_REWAKEUP};
+		$perprocess{$process}->{HIGH_NR_SCANNED} += $perprocesspid{$process_pid}->{HIGH_NR_SCANNED};
+		$perprocess{$process}->{HIGH_NR_FILE_SCANNED} += $perprocesspid{$process_pid}->{HIGH_NR_FILE_SCANNED};
+		$perprocess{$process}->{HIGH_NR_ANON_SCANNED} += $perprocesspid{$process_pid}->{HIGH_NR_ANON_SCANNED};
+		$perprocess{$process}->{HIGH_NR_RECLAIMED} += $perprocesspid{$process_pid}->{HIGH_NR_RECLAIMED};
+		$perprocess{$process}->{HIGH_NR_FILE_RECLAIMED} += $perprocesspid{$process_pid}->{HIGH_NR_FILE_RECLAIMED};
+		$perprocess{$process}->{HIGH_NR_ANON_RECLAIMED} += $perprocesspid{$process_pid}->{HIGH_NR_ANON_RECLAIMED};
+		$perprocess{$process}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC} += $perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC};
+		$perprocess{$process}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC} += $perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC};
+		$perprocess{$process}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC} += $perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC};
+		$perprocess{$process}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC} += $perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC};
+
+		for (my $order = 0; $order < 20; $order++) {
+			$perprocess{$process}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN_PERORDER}[$order] += $perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN_PERORDER}[$order];
+			$perprocess{$process}->{MM_VMSCAN_WAKEUP_KSWAPD_PERORDER}[$order] += $perprocesspid{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD_PERORDER}[$order];
+			$perprocess{$process}->{MM_VMSCAN_KSWAPD_WAKE_PERORDER}[$order] += $perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE_PERORDER}[$order];
+
+		}
+
+		# Aggregate direct reclaim latencies
+		my $wr_index = $perprocess{$process}->{MM_VMSCAN_DIRECT_RECLAIM_END};
+		my $rd_index = 0;
+		while (defined $perprocesspid{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$rd_index]) {
+			$perprocess{$process}->{HIGH_DIRECT_RECLAIM_LATENCY}[$wr_index] = $perprocesspid{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$rd_index];
+			$rd_index++;
+			$wr_index++;
+		}
+		$perprocess{$process}->{MM_VMSCAN_DIRECT_RECLAIM_END} = $wr_index;
+
+		# Aggregate kswapd latencies
+		my $wr_index = $perprocess{$process}->{MM_VMSCAN_KSWAPD_SLEEP};
+		my $rd_index = 0;
+		while (defined $perprocesspid{$process_pid}->{HIGH_KSWAPD_LATENCY}[$rd_index]) {
+			$perprocess{$process}->{HIGH_KSWAPD_LATENCY}[$wr_index] = $perprocesspid{$process_pid}->{HIGH_KSWAPD_LATENCY}[$rd_index];
+			$rd_index++;
+			$wr_index++;
+		}
+		$perprocess{$process}->{MM_VMSCAN_DIRECT_RECLAIM_END} = $wr_index;
+	}
+}
+
+sub report() {
+	if (!$opt_ignorepid) {
+		dump_stats(\%perprocesspid);
+	} else {
+		aggregate_perprocesspid();
+		dump_stats(\%perprocess);
+	}
+}
+
+# Process events or signals until neither is available
+sub signal_loop() {
+	my $sigint_processed;
+	do {
+		$sigint_processed = 0;
+		process_events();
+
+		# Handle pending signals if any
+		if ($sigint_pending) {
+			my $current_time = time;
+
+			if ($sigint_exit) {
+				print "Received exit signal\n";
+				$sigint_pending = 0;
+			}
+			if ($sigint_report) {
+				if ($current_time >= $sigint_received + 2) {
+					report();
+					$sigint_report = 0;
+					$sigint_pending = 0;
+					$sigint_processed = 1;
+				}
+			}
+		}
+	} while ($sigint_pending || $sigint_processed);
+}
+
+signal_loop();
+report();