staging: rtl8723bs: fix OOB read in rtw_action_frame_parse()grafted

rtw_action_frame_parse() takes a frame_len parameter but never
actually checks it before indexing into the frame body:

	const u8 *frame_body = frame + sizeof(struct ieee80211_hdr_3addr);
	...
	c = frame_body[0];
	...
	a = frame_body[1];

frame_body already points 24 bytes (sizeof(struct
ieee80211_hdr_3addr)) into frame, so reading frame_body[0] and
frame_body[1] requires frame_len >= 26. A management action frame
shorter than that (e.g. exactly 24 bytes, the minimum a malicious
peer can send) causes a 1-2 byte out-of-bounds read.

This is reachable from rtw_cfg80211_monitor_if_xmit_entry() and
cfg80211_rtw_mgmt_tx() in ioctl_cfg80211.c, both of which pass
attacker/user-influenced frame buffers and lengths straight through.

Add the missing length check before frame_body is dereferenced.

Fixes: 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260728125456.32359-3-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 198 insertions, 0 deletions

diff --git a/Documentation/trace/fprobe.rst b/Documentation/trace/fprobe.rst
new file mode 100644
index 000000000..46dd46a97
--- /dev/null
+++ b/Documentation/trace/fprobe.rst
@@ -0,0 +1,198 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================================
+Fprobe - Function entry/exit probe
+==================================
+
+.. Author: Masami Hiramatsu <mhiramat@kernel.org>
+
+Introduction
+============
+
+Fprobe is a function entry/exit probe based on the function-graph tracing
+feature in ftrace.
+Instead of tracing all functions, if you want to attach callbacks on specific
+function entry and exit, similar to the kprobes and kretprobes, you can
+use fprobe. Compared with kprobes and kretprobes, fprobe gives faster
+instrumentation for multiple functions with single handler. This document
+describes how to use fprobe.
+
+The usage of fprobe
+===================
+
+The fprobe is a wrapper of ftrace (+ kretprobe-like return callback) to
+attach callbacks to multiple function entry and exit. User needs to set up
+the `struct fprobe` and pass it to `register_fprobe()`.
+
+Typically, `fprobe` data structure is initialized with the `entry_handler`
+and/or `exit_handler` as below.
+
+.. code-block:: c
+
+ struct fprobe fp = {
+        .entry_handler  = my_entry_callback,
+        .exit_handler   = my_exit_callback,
+ };
+
+To enable the fprobe, call one of register_fprobe(), register_fprobe_ips(), and
+register_fprobe_syms(). These functions register the fprobe with different types
+of parameters.
+
+The register_fprobe() enables a fprobe by function-name filters.
+E.g. this enables @fp on "func*()" function except "func2()".::
+
+  register_fprobe(&fp, "func*", "func2");
+
+The register_fprobe_ips() enables a fprobe by ftrace-location addresses.
+E.g.
+
+.. code-block:: c
+
+  unsigned long ips[] = { 0x.... };
+
+  register_fprobe_ips(&fp, ips, ARRAY_SIZE(ips));
+
+And the register_fprobe_syms() enables a fprobe by symbol names.
+E.g.
+
+.. code-block:: c
+
+  char syms[] = {"func1", "func2", "func3"};
+
+  register_fprobe_syms(&fp, syms, ARRAY_SIZE(syms));
+
+To disable (remove from functions) this fprobe, call::
+
+  unregister_fprobe(&fp);
+
+You can temporally (soft) disable the fprobe by::
+
+  disable_fprobe(&fp);
+
+and resume by::
+
+  enable_fprobe(&fp);
+
+The above is defined by including the header::
+
+  #include <linux/fprobe.h>
+
+Same as ftrace, the registered callbacks will start being called some time
+after the register_fprobe() is called and before it returns. See
+Documentation/trace/ftrace.rst.
+
+Also, the unregister_fprobe() will guarantee that both enter and exit
+handlers are no longer being called by functions after unregister_fprobe()
+returns as same as unregister_ftrace_function().
+
+The fprobe entry/exit handler
+=============================
+
+The prototype of the entry/exit callback function are as follows:
+
+.. code-block:: c
+
+ int entry_callback(struct fprobe *fp, unsigned long entry_ip, unsigned long ret_ip, struct ftrace_regs *fregs, void *entry_data);
+
+ void exit_callback(struct fprobe *fp, unsigned long entry_ip, unsigned long ret_ip, struct ftrace_regs *fregs, void *entry_data);
+
+Note that the @entry_ip is saved at function entry and passed to exit
+handler.
+If the entry callback function returns !0, the corresponding exit callback
+will be cancelled.
+
+@fp
+        This is the address of `fprobe` data structure related to this handler.
+        You can embed the `fprobe` to your data structure and get it by
+        container_of() macro from @fp. The @fp must not be NULL.
+
+@entry_ip
+        This is the ftrace address of the traced function (both entry and exit).
+        Note that this may not be the actual entry address of the function but
+        the address where the ftrace is instrumented.
+
+@ret_ip
+        This is the return address that the traced function will return to,
+        somewhere in the caller. This can be used at both entry and exit.
+
+@fregs
+        This is the `ftrace_regs` data structure at the entry and exit. This
+        includes the function parameters, or the return values. So user can
+        access those values via appropriate `ftrace_regs_*` APIs.
+
+@entry_data
+        This is a local storage to share the data between entry and exit handlers.
+        This storage is NULL by default. If the user specify `exit_handler` field
+        and `entry_data_size` field when registering the fprobe, the storage is
+        allocated and passed to both `entry_handler` and `exit_handler`.
+
+Entry data size and exit handlers on the same function
+======================================================
+
+Since the entry data is passed via per-task stack and it has limited size,
+the entry data size per probe is limited to `15 * sizeof(long)`. You also need
+to take care that the different fprobes are probing on the same function, this
+limit becomes smaller. The entry data size is aligned to `sizeof(long)` and
+each fprobe which has exit handler uses a `sizeof(long)` space on the stack,
+you should keep the number of fprobes on the same function as small as
+possible.
+
+Share the callbacks with kprobes
+================================
+
+Since the recursion safeness of the fprobe (and ftrace) is a bit different
+from the kprobes, this may cause an issue if user wants to run the same
+code from the fprobe and the kprobes.
+
+Kprobes has per-cpu 'current_kprobe' variable which protects the kprobe
+handler from recursion in all cases. On the other hand, fprobe uses
+only ftrace_test_recursion_trylock(). This allows interrupt context to
+call another (or same) fprobe while the fprobe user handler is running.
+
+This is not a matter if the common callback code has its own recursion
+detection, or it can handle the recursion in the different contexts
+(normal/interrupt/NMI.)
+But if it relies on the 'current_kprobe' recursion lock, it has to check
+kprobe_running() and use kprobe_busy_*() APIs.
+
+Fprobe has FPROBE_FL_KPROBE_SHARED flag to do this. If your common callback
+code will be shared with kprobes, please set FPROBE_FL_KPROBE_SHARED
+*before* registering the fprobe, like:
+
+.. code-block:: c
+
+ fprobe.flags = FPROBE_FL_KPROBE_SHARED;
+
+ register_fprobe(&fprobe, "func*", NULL);
+
+This will protect your common callback from the nested call.
+
+The missed counter
+==================
+
+The `fprobe` data structure has `fprobe::nmissed` counter field as same as
+kprobes.
+This counter counts up when;
+
+ - fprobe fails to take ftrace_recursion lock. This usually means that a function
+   which is traced by other ftrace users is called from the entry_handler.
+
+ - fprobe fails to setup the function exit because of failing to allocate the
+   data buffer from the per-task shadow stack.
+
+The `fprobe::nmissed` field counts up in both cases. Therefore, the former
+skips both of entry and exit callback and the latter skips the exit
+callback, but in both case the counter will increase by 1.
+
+Note that if you set the FTRACE_OPS_FL_RECURSION and/or FTRACE_OPS_FL_RCU to
+`fprobe::ops::flags` (ftrace_ops::flags) when registering the fprobe, this
+counter may not work correctly, because ftrace skips the fprobe function which
+increase the counter.
+
+
+Functions and structures
+========================
+
+.. kernel-doc:: include/linux/fprobe.h
+.. kernel-doc:: kernel/trace/fprobe.c
+