iio: proximity: vl53l0x-i2c: claim direct mode for raw readsgrafted

vl53l0x_read_raw() starts a single-shot ranging measurement and reads
back the result. Once the triggered buffer is enabled the sensor runs in
continuous mode and its data-ready interrupt is routed to the trigger,
so a concurrent in_distance_raw read disturbs the streaming setup and
never gets its completion, returning -ETIMEDOUT.

The original submission claimed direct mode here, but it was dropped
during review because the driver had no buffer support at the time [1].
Continuous (buffered) mode was later added without restoring the
claim [2], reintroducing the conflict.

Reject direct reads while buffered capture is active by claiming direct
mode around the measurement, as the vl53l1x sibling already does.

Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1]
Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2]
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

1 files changed, 42 insertions, 0 deletions

diff --git a/Documentation/trace/events-pci-controller.rst b/Documentation/trace/events-pci-controller.rst
new file mode 100644
index 000000000..cb9f71592
--- /dev/null
+++ b/Documentation/trace/events-pci-controller.rst
@@ -0,0 +1,42 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
+Subsystem Trace Points: PCI Controller
+======================================
+
+Overview
+========
+The PCI controller tracing system provides tracepoints to monitor controller
+level information for debugging purpose. The events normally show up here:
+
+	/sys/kernel/tracing/events/pci_controller
+
+Cf. include/trace/events/pci_controller.h for the events definitions.
+
+Available Tracepoints
+=====================
+
+pcie_ltssm_state_transition
+---------------------------
+
+Monitors PCIe LTSSM state transition including state and rate information
+::
+
+    pcie_ltssm_state_transition  "dev: %s state: %s rate: %s\n"
+
+**Parameters**:
+
+* ``dev`` - PCIe controller instance
+* ``state`` - PCIe LTSSM state
+* ``rate`` - PCIe date rate
+
+**Example Usage**:
+
+.. code-block:: shell
+
+    # Enable the tracepoint
+    echo 1 > /sys/kernel/debug/tracing/events/pci_controller/pcie_ltssm_state_transition/enable
+
+    # Monitor events (the following output is generated when a device is linking)
+    cat /sys/kernel/debug/tracing/trace_pipe
+       kworker/0:0-9       [000] .....     5.600221: pcie_ltssm_state_transition: dev: a40000000.pcie state: RCVRY_EQ2 rate: 8.0 GT/s