Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 80 insertions, 0 deletions

diff --git a/Documentation/target/target-export-device b/Documentation/target/target-export-device
new file mode 100755
index 000000000..b803f4f88
--- /dev/null
+++ b/Documentation/target/target-export-device
@@ -0,0 +1,80 @@
+#!/bin/sh
+#
+# This script illustrates the sequence of operations in configfs to
+# create a very simple LIO iSCSI target with a file or block device
+# backstore.
+#
+# (C) Copyright 2014 Christophe Vu-Brugier <cvubrugier@fastmail.fm>
+#
+
+print_usage() {
+    cat <<EOF
+Usage: $(basename $0) [-p PORTAL] DEVICE|FILE
+Export a block device or a file as an iSCSI target with a single LUN
+EOF
+}
+
+die() {
+    echo $1
+    exit 1
+}
+
+while getopts "hp:" arg; do
+    case $arg in
+        h) print_usage; exit 0;;
+        p) PORTAL=${OPTARG};;
+    esac
+done
+shift $(($OPTIND - 1))
+
+DEVICE=$1
+[ -n "$DEVICE" ] || die "Missing device or file argument"
+[ -b $DEVICE -o -f $DEVICE ] || die "Invalid device or file: ${DEVICE}"
+IQN="iqn.2003-01.org.linux-iscsi.$(hostname):$(basename $DEVICE)"
+[ -n "$PORTAL" ] || PORTAL="0.0.0.0:3260"
+
+CONFIGFS=/sys/kernel/config
+CORE_DIR=$CONFIGFS/target/core
+ISCSI_DIR=$CONFIGFS/target/iscsi
+
+# Load the target modules and mount the config file system
+lsmod | grep -q configfs || modprobe configfs
+lsmod | grep -q target_core_mod || modprobe target_core_mod
+mount | grep -q ^configfs || mount -t configfs none $CONFIGFS
+mkdir -p $ISCSI_DIR
+
+# Create a backstore
+if [ -b $DEVICE ]; then
+    BACKSTORE_DIR=$CORE_DIR/iblock_0/data
+    mkdir -p $BACKSTORE_DIR
+    echo "udev_path=${DEVICE}" > $BACKSTORE_DIR/control
+else
+    BACKSTORE_DIR=$CORE_DIR/fileio_0/data
+    mkdir -p $BACKSTORE_DIR
+    DEVICE_SIZE=$(du -b $DEVICE | cut -f1)
+    echo "fd_dev_name=${DEVICE}" > $BACKSTORE_DIR/control
+    echo "fd_dev_size=${DEVICE_SIZE}" > $BACKSTORE_DIR/control
+    echo 1 > $BACKSTORE_DIR/attrib/emulate_write_cache
+fi
+echo 1 > $BACKSTORE_DIR/enable
+
+# Create an iSCSI target and a target portal group (TPG)
+mkdir $ISCSI_DIR/$IQN
+mkdir $ISCSI_DIR/$IQN/tpgt_1/
+
+# Create a LUN
+mkdir $ISCSI_DIR/$IQN/tpgt_1/lun/lun_0
+ln -s $BACKSTORE_DIR $ISCSI_DIR/$IQN/tpgt_1/lun/lun_0/data
+echo 1 > $ISCSI_DIR/$IQN/tpgt_1/enable
+
+# Create a network portal
+mkdir $ISCSI_DIR/$IQN/tpgt_1/np/$PORTAL
+
+# Disable authentication
+echo 0 > $ISCSI_DIR/$IQN/tpgt_1/attrib/authentication
+echo 1 > $ISCSI_DIR/$IQN/tpgt_1/attrib/generate_node_acls
+
+# Allow write access for non authenticated initiators
+echo 0 > $ISCSI_DIR/$IQN/tpgt_1/attrib/demo_mode_write_protect
+
+echo "Target ${IQN}, portal ${PORTAL} has been created"