iio: proximity: vl53l0x-i2c: claim direct mode for raw readsgrafted

vl53l0x_read_raw() starts a single-shot ranging measurement and reads
back the result. Once the triggered buffer is enabled the sensor runs in
continuous mode and its data-ready interrupt is routed to the trigger,
so a concurrent in_distance_raw read disturbs the streaming setup and
never gets its completion, returning -ETIMEDOUT.

The original submission claimed direct mode here, but it was dropped
during review because the driver had no buffer support at the time [1].
Continuous (buffered) mode was later added without restoring the
claim [2], reintroducing the conflict.

Reject direct reads while buffered capture is active by claiming direct
mode around the measurement, as the vl53l1x sibling already does.

Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1]
Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2]
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

1 files changed, 73 insertions, 0 deletions

diff --git a/Documentation/security/keys/ecryptfs.rst b/Documentation/security/keys/ecryptfs.rst
new file mode 100644
index 000000000..0e2be0a6b
--- /dev/null
+++ b/Documentation/security/keys/ecryptfs.rst
@@ -0,0 +1,73 @@
+==========================================
+Encrypted keys for the eCryptfs filesystem
+==========================================
+
+ECryptfs is a stacked filesystem which transparently encrypts and decrypts each
+file using a randomly generated File Encryption Key (FEK).
+
+Each FEK is in turn encrypted with a File Encryption Key Encryption Key (FEKEK)
+either in kernel space or in user space with a daemon called 'ecryptfsd'.  In
+the former case the operation is performed directly by the kernel CryptoAPI
+using a key, the FEKEK, derived from a user prompted passphrase;  in the latter
+the FEK is encrypted by 'ecryptfsd' with the help of external libraries in order
+to support other mechanisms like public key cryptography, PKCS#11 and TPM based
+operations.
+
+The data structure defined by eCryptfs to contain information required for the
+FEK decryption is called authentication token and, currently, can be stored in a
+kernel key of the 'user' type, inserted in the user's session specific keyring
+by the userspace utility 'mount.ecryptfs' shipped with the package
+'ecryptfs-utils'.
+
+The 'encrypted' key type has been extended with the introduction of the new
+format 'ecryptfs' in order to be used in conjunction with the eCryptfs
+filesystem.  Encrypted keys of the newly introduced format store an
+authentication token in its payload with a FEKEK randomly generated by the
+kernel and protected by the parent master key.
+
+In order to avoid known-plaintext attacks, the datablob obtained through
+commands 'keyctl print' or 'keyctl pipe' does not contain the overall
+authentication token, which content is well known, but only the FEKEK in
+encrypted form.
+
+The eCryptfs filesystem may really benefit from using encrypted keys in that the
+required key can be securely generated by an Administrator and provided at boot
+time after the unsealing of a 'trusted' key in order to perform the mount in a
+controlled environment.  Another advantage is that the key is not exposed to
+threats of malicious software, because it is available in clear form only at
+kernel level.
+
+Usage::
+
+   keyctl add encrypted name "new ecryptfs key-type:master-key-name keylen" ring
+   keyctl add encrypted name "load hex_blob" ring
+   keyctl update keyid "update key-type:master-key-name"
+
+Where::
+
+	name:= '<16 hexadecimal characters>'
+	key-type:= 'trusted' | 'user'
+	keylen:= 64
+
+
+Example of encrypted key usage with the eCryptfs filesystem:
+
+Create an encrypted key "1000100010001000" of length 64 bytes with format
+'ecryptfs' and save it using a previously loaded user key "test"::
+
+    $ keyctl add encrypted 1000100010001000 "new ecryptfs user:test 64" @u
+    19184530
+
+    $ keyctl print 19184530
+    ecryptfs user:test 64 490045d4bfe48c99f0d465fbbbb79e7500da954178e2de0697
+    dd85091f5450a0511219e9f7cd70dcd498038181466f78ac8d4c19504fcc72402bfc41c2
+    f253a41b7507ccaa4b2b03fff19a69d1cc0b16e71746473f023a95488b6edfd86f7fdd40
+    9d292e4bacded1258880122dd553a661
+
+    $ keyctl pipe 19184530 > ecryptfs.blob
+
+Mount an eCryptfs filesystem using the created encrypted key "1000100010001000"
+into the '/secret' directory::
+
+    $ mount -i -t ecryptfs -oecryptfs_sig=1000100010001000,\
+      ecryptfs_cipher=aes,ecryptfs_key_bytes=32 /secret /secret