Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 72 insertions, 0 deletions

diff --git a/Documentation/process/maintainer-devicetree.rst b/Documentation/process/maintainer-devicetree.rst
new file mode 100644
index 000000000..ecc3ed638
--- /dev/null
+++ b/Documentation/process/maintainer-devicetree.rst
@@ -0,0 +1,72 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
+Devicetree and Open Firmware Subsystem
+======================================
+
+Other Process Documents
+-----------------------
+
+Please see the documents in Documentation/devicetree/bindings/ for information
+on how to write proper Devicetree bindings and how to submit patches.
+
+Patch Review and Handling
+-------------------------
+
+Patches handled by Devicetree maintainers are processed differently depending
+on the patch type:
+
+1. Core OF driver code, e.g. drivers/of/:
+   patches are reviewed and applied by DT maintainers.
+
+2. Devicetree bindings:
+   patches are reviewed by DT maintainers, but should be applied by subsystem
+   maintainers except in certain cases.  See also *For kernel maintainers* in
+   Documentation/devicetree/bindings/submitting-patches.rst.
+
+3. DTS and drivers:
+   DT maintainers might provide comments, but review is generally not expected.
+   DTS must pass schema checks (dtbs_check) or at least do not add any
+   new warnings.
+
+Patchwork
+~~~~~~~~~
+
+Devicetree maintainers review patches using Patchwork, so the current status of
+a patch can be checked there. For typical driver submissions, Patchwork
+receives the entire patch set, but only a few patches are usually Devicetree
+bindings that are reviewed by DT maintainers.
+
+Explanation of Patchwork statuses:
+
+ - **New**: Not yet processed by the automation toolset.
+ - **Needs ACK**: Waiting for review by DT maintainers.
+ - **Handled Elsewhere**: Non-DT patch; not being reviewed here.
+ - **RFC**: Patch was likely ignored because it was an incomplete RFC.
+ - **Changes Requested**: Patch was reviewed and DT maintainers expect changes.
+ - **Accepted**: Patch was reviewed and applied by DT maintainers to their tree.
+ - **Not Applicable**: Patch was reviewed and is likely in good shape, with a
+   *Reviewed-by* or *Acked-by* tag provided, but DT maintainers expect someone
+   else to apply it.
+
+Patch Re-review and Pinging
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Due to the high volume of email traffic, Devicetree maintainers do not read
+every email they receive and instead rely on Patchwork during the review
+process. They also often skip patches that have already been reviewed.
+
+As a result, maintainers might miss:
+
+1. Questions about already reviewed patches.
+2. Pings, for example when a patch has been reviewed by DT maintainers but has
+   not been picked up by subsystem maintainers.
+
+Such cases can be addressed by:
+
+1. Pinging DT maintainers on the IRC channel.
+2. Dropping the DT maintainer’s *Acked-by* or *Reviewed-by* tag when sending a new
+   version of the patch set, together with an explanation in the patch
+   changelog describing why the tag was removed and what is expected from DT
+   maintainers.
+