iio: proximity: isl29501: Fix return type of isl29501_register_writegrafted

isl29501_register_write() was returning a u32 instead of an int.
Since the function returns negative error codes (such as -ERANGE or
return values from i2c_smbus_write_byte_data()), returning an unsigned
integer type prevents callers from correctly checking for negative error
conditions.

Fix this by changing the function return type from u32 to int.

This was found through manual code review.

Fixes: 1c28799257bc ("iio: light: isl29501: Add support for the ISL29501 ToF sensor.")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

1 files changed, 71 insertions, 0 deletions

diff --git a/Documentation/process/debugging/index.rst b/Documentation/process/debugging/index.rst
new file mode 100644
index 000000000..357243e18
--- /dev/null
+++ b/Documentation/process/debugging/index.rst
@@ -0,0 +1,71 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================================
+Debugging advice for Linux Kernel developers
+============================================
+
+general guides
+--------------
+
+.. toctree::
+   :maxdepth: 1
+
+   driver_development_debugging_guide
+   gdb-kernel-debugging
+   kgdb
+   userspace_debugging_guide
+
+subsystem specific guides
+-------------------------
+
+.. toctree::
+   :maxdepth: 1
+
+   media_specific_debugging_guide
+
+General debugging advice
+========================
+
+Depending on the issue, a different set of tools is available to track down the
+problem or even to realize whether there is one in the first place.
+
+As a first step you have to figure out what kind of issue you want to debug.
+Depending on the answer, your methodology and choice of tools may vary.
+
+Do I need to debug with limited access?
+---------------------------------------
+
+Do you have limited access to the machine or are you unable to stop the running
+execution?
+
+In this case your debugging capability depends on built-in debugging support of
+provided distribution kernel.
+The :doc:`/process/debugging/userspace_debugging_guide` provides a brief
+overview over a range of possible debugging tools in that situation. You can
+check the capability of your kernel, in most cases, by looking into config file
+within the /boot directory.
+
+Do I have root access to the system?
+------------------------------------
+
+Are you easily able to replace the module in question or to install a new
+kernel?
+
+In that case your range of available tools is a lot bigger, you can find the
+tools in the :doc:`/process/debugging/driver_development_debugging_guide`.
+
+Is timing a factor?
+-------------------
+
+It is important to understand if the problem you want to debug manifests itself
+consistently (i.e. given a set of inputs you always get the same, incorrect
+output), or inconsistently. If it manifests itself inconsistently, some timing
+factor might be at play. If inserting delays into the code does change the
+behavior, then quite likely timing is a factor.
+
+When timing does alter the outcome of the code execution using a simple
+printk() for debugging purposes may not work, a similar alternative is to use
+trace_printk() , which logs the debug messages to the trace file instead of the
+kernel log.
+
+**Copyright** ©2024 : Collabora