Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 109 insertions, 0 deletions

diff --git a/Documentation/networking/tproxy.rst b/Documentation/networking/tproxy.rst
new file mode 100644
index 000000000..75e4990cc
--- /dev/null
+++ b/Documentation/networking/tproxy.rst
@@ -0,0 +1,109 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
+Transparent proxy support
+=========================
+
+This feature adds Linux 2.2-like transparent proxy support to current kernels.
+To use it, enable the socket match and the TPROXY target in your kernel config.
+You will need policy routing too, so be sure to enable that as well.
+
+From Linux 4.18 transparent proxy support is also available in nf_tables.
+
+1. Making non-local sockets work
+================================
+
+The idea is that you identify packets with destination address matching a local
+socket on your box, set the packet mark to a certain value::
+
+    # iptables -t mangle -N DIVERT
+    # iptables -t mangle -A PREROUTING -p tcp -m socket --transparent -j DIVERT
+    # iptables -t mangle -A DIVERT -j MARK --set-mark 1
+    # iptables -t mangle -A DIVERT -j ACCEPT
+
+Alternatively you can do this in nft with the following commands::
+
+    # nft add table filter
+    # nft add chain filter divert "{ type filter hook prerouting priority -150; }"
+    # nft add rule filter divert meta l4proto tcp socket transparent 1 meta mark set 1 accept
+
+And then match on that value using policy routing to have those packets
+delivered locally::
+
+    # ip rule add fwmark 1 lookup 100
+    # ip route add local 0.0.0.0/0 dev lo table 100
+
+Because of certain restrictions in the IPv4 routing output code you'll have to
+modify your application to allow it to send datagrams _from_ non-local IP
+addresses. All you have to do is enable the (SOL_IP, IP_TRANSPARENT) socket
+option before calling bind::
+
+    fd = socket(AF_INET, SOCK_STREAM, 0);
+    /* - 8< -*/
+    int value = 1;
+    setsockopt(fd, SOL_IP, IP_TRANSPARENT, &value, sizeof(value));
+    /* - 8< -*/
+    name.sin_family = AF_INET;
+    name.sin_port = htons(0xCAFE);
+    name.sin_addr.s_addr = htonl(0xDEADBEEF);
+    bind(fd, &name, sizeof(name));
+
+A trivial patch for netcat is available here:
+http://people.netfilter.org/hidden/tproxy/netcat-ip_transparent-support.patch
+
+
+2. Redirecting traffic
+======================
+
+Transparent proxying often involves "intercepting" traffic on a router. This is
+usually done with the iptables REDIRECT target; however, there are serious
+limitations of that method. One of the major issues is that it actually
+modifies the packets to change the destination address -- which might not be
+acceptable in certain situations. (Think of proxying UDP for example: you won't
+be able to find out the original destination address. Even in case of TCP
+getting the original destination address is racy.)
+
+The 'TPROXY' target provides similar functionality without relying on NAT. Simply
+add rules like this to the iptables ruleset above::
+
+    # iptables -t mangle -A PREROUTING -p tcp --dport 80 -j TPROXY \
+      --tproxy-mark 0x1/0x1 --on-port 50080
+
+Or the following rule to nft::
+
+    # nft add rule filter divert tcp dport 80 tproxy to :50080 meta mark set 1 accept
+
+Note that for this to work you'll have to modify the proxy to enable (SOL_IP,
+IP_TRANSPARENT) for the listening socket.
+
+As an example implementation, tcprdr is available here:
+https://git.breakpoint.cc/cgit/fw/tcprdr.git/
+This tool is written by Florian Westphal and it was used for testing during the
+nf_tables implementation.
+
+3. Iptables and nf_tables extensions
+====================================
+
+To use tproxy you'll need to have the following modules compiled for iptables:
+
+ - NETFILTER_XT_MATCH_SOCKET
+ - NETFILTER_XT_TARGET_TPROXY
+
+Or the floowing modules for nf_tables:
+
+ - NFT_SOCKET
+ - NFT_TPROXY
+
+4. Application support
+======================
+
+4.1. Squid
+----------
+
+Squid 3.HEAD has support built-in. To use it, pass
+'--enable-linux-netfilter' to configure and set the 'tproxy' option on
+the HTTP listener you redirect traffic to with the TPROXY iptables
+target.
+
+For more information please consult the following page on the Squid
+wiki: http://wiki.squid-cache.org/Features/Tproxy4