Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 132 insertions, 0 deletions

diff --git a/Documentation/networking/nfc.rst b/Documentation/networking/nfc.rst
new file mode 100644
index 000000000..401735006
--- /dev/null
+++ b/Documentation/networking/nfc.rst
@@ -0,0 +1,132 @@
+===================
+Linux NFC subsystem
+===================
+
+The Near Field Communication (NFC) subsystem is required to standardize the
+NFC device drivers development and to create an unified userspace interface.
+
+This document covers the architecture overview, the device driver interface
+description and the userspace interface description.
+
+Architecture overview
+=====================
+
+The NFC subsystem is responsible for:
+      - NFC adapters management;
+      - Polling for targets;
+      - Low-level data exchange;
+
+The subsystem is divided in some parts. The 'core' is responsible for
+providing the device driver interface. On the other side, it is also
+responsible for providing an interface to control operations and low-level
+data exchange.
+
+The control operations are available to userspace via generic netlink.
+
+The low-level data exchange interface is provided by the new socket family
+PF_NFC. The NFC_SOCKPROTO_RAW performs raw communication with NFC targets.
+
+.. code-block:: none
+
+        +--------------------------------------+
+        |              USER SPACE              |
+        +--------------------------------------+
+            ^                       ^
+            | low-level             | control
+            | data exchange         | operations
+            |                       |
+            |                       v
+            |                  +-----------+
+            | AF_NFC           |  netlink  |
+            | socket           +-----------+
+            | raw                   ^
+            |                       |
+            v                       v
+        +---------+            +-----------+
+        | rawsock | <--------> |   core    |
+        +---------+            +-----------+
+                                    ^
+                                    |
+                                    v
+                               +-----------+
+                               |  driver   |
+                               +-----------+
+
+Device Driver Interface
+=======================
+
+When registering on the NFC subsystem, the device driver must inform the core
+of the set of supported NFC protocols and the set of ops callbacks. The ops
+callbacks that must be implemented are the following:
+
+* start_poll - setup the device to poll for targets
+* stop_poll - stop on progress polling operation
+* activate_target - select and initialize one of the targets found
+* deactivate_target - deselect and deinitialize the selected target
+* data_exchange - send data and receive the response (transceive operation)
+
+Userspace interface
+===================
+
+The userspace interface is divided in control operations and low-level data
+exchange operation.
+
+Control operations
+------------------
+
+Generic netlink is used to implement the interface to the control operations.
+The operations are composed by commands and events, all listed below:
+
+* NFC_CMD_GET_DEVICE - get specific device info or dump the device list
+* NFC_CMD_START_POLL - setup a specific device to polling for targets
+* NFC_CMD_STOP_POLL - stop the polling operation in a specific device
+* NFC_CMD_GET_TARGET - dump the list of targets found by a specific device
+
+* NFC_EVENT_DEVICE_ADDED - reports an NFC device addition
+* NFC_EVENT_DEVICE_REMOVED - reports an NFC device removal
+* NFC_EVENT_TARGETS_FOUND - reports START_POLL results when 1 or more targets
+  are found
+
+The user must call START_POLL to poll for NFC targets, passing the desired NFC
+protocols through NFC_ATTR_PROTOCOLS attribute. The device remains in polling
+state until it finds any target. However, the user can stop the polling
+operation by calling STOP_POLL command. In this case, it will be checked if
+the requester of STOP_POLL is the same of START_POLL.
+
+If the polling operation finds one or more targets, the event TARGETS_FOUND is
+sent (including the device id). The user must call GET_TARGET to get the list of
+all targets found by such device. Each reply message has target attributes with
+relevant information such as the supported NFC protocols.
+
+All polling operations requested through one netlink socket are stopped when
+it's closed.
+
+Low-level data exchange
+-----------------------
+
+The userspace must use PF_NFC sockets to perform any data communication with
+targets. All NFC sockets use AF_NFC::
+
+        struct sockaddr_nfc {
+               sa_family_t sa_family;
+               __u32 dev_idx;
+               __u32 target_idx;
+               __u32 nfc_protocol;
+        };
+
+To establish a connection with one target, the user must create an
+NFC_SOCKPROTO_RAW socket and call the 'connect' syscall with the sockaddr_nfc
+struct correctly filled. All information comes from NFC_EVENT_TARGETS_FOUND
+netlink event. As a target can support more than one NFC protocol, the user
+must inform which protocol it wants to use.
+
+Internally, 'connect' will result in an activate_target call to the driver.
+When the socket is closed, the target is deactivated.
+
+The data format exchanged through the sockets is NFC protocol dependent. For
+instance, when communicating with MIFARE tags, the data exchanged are MIFARE
+commands and their responses.
+
+The first received package is the response to the first sent package and so
+on. In order to allow valid "empty" responses, every data received has a NULL
+header of 1 byte.