Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 166 insertions, 0 deletions

diff --git a/Documentation/networking/mptcp-sysctl.rst b/Documentation/networking/mptcp-sysctl.rst
new file mode 100644
index 000000000..b9b5f58e0
--- /dev/null
+++ b/Documentation/networking/mptcp-sysctl.rst
@@ -0,0 +1,166 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================
+MPTCP Sysfs variables
+=====================
+
+/proc/sys/net/mptcp/* Variables
+===============================
+
+add_addr_timeout - INTEGER (seconds)
+	Set the maximum value of timeout after which an ADD_ADDR control message
+	will be resent to an MPTCP peer that has not acknowledged a previous
+	ADD_ADDR message. A dynamically estimated retransmission timeout based
+	on the estimated connection round-trip-time is used if this value is
+	lower than the maximum one.
+
+	Do not retransmit if set to 0.
+
+	The default value matches TCP_RTO_MAX. This is a per-namespace
+	sysctl.
+
+	Default: 120
+
+add_addr_v6_port_drop_ts - BOOLEAN
+	Control whether preparing an ADD_ADDR with an IPv6 address and a port
+	should drop the TCP timestamps option to have enough option space to
+	send the signal.
+
+	If there is not enough option space, and the TCP timestamps option
+	cannot be dropped, the signal cannot be sent. Note that dropping the TCP
+	timestamps option for one packet of the connection could disrupt some
+	middleboxes: even if it should be unlikely, they could drop the packet
+	or block the connection. This is a per-namespace sysctl.
+
+	Default: 1 (enabled)
+
+allow_join_initial_addr_port - BOOLEAN
+	Allow peers to send join requests to the IP address and port number used
+	by the initial subflow if the value is 1. This controls a flag that is
+	sent to the peer at connection time, and whether such join requests are
+	accepted or denied.
+
+	Joins to addresses advertised with ADD_ADDR are not affected by this
+	value.
+
+	This is a per-namespace sysctl.
+
+	Default: 1
+
+available_path_managers - STRING
+	Shows the available path managers choices that are registered. More
+	path managers may be available, but not loaded.
+
+available_schedulers - STRING
+	Shows the available schedulers choices that are registered. More packet
+	schedulers may be available, but not loaded.
+
+blackhole_timeout - INTEGER (seconds)
+	Initial time period in second to disable MPTCP on active MPTCP sockets
+	when a MPTCP firewall blackhole issue happens. This time period will
+	grow exponentially when more blackhole issues get detected right after
+	MPTCP is re-enabled and will reset to the initial value when the
+	blackhole issue goes away.
+
+	0 to disable the blackhole detection. This is a per-namespace sysctl.
+
+	Default: 3600
+
+checksum_enabled - BOOLEAN
+	Control whether DSS checksum can be enabled.
+
+	DSS checksum can be enabled if the value is nonzero. This is a
+	per-namespace sysctl.
+
+	Default: 0
+
+close_timeout - INTEGER (seconds)
+	Set the make-after-break timeout: in absence of any close or
+	shutdown syscall, MPTCP sockets will maintain the status
+	unchanged for such time, after the last subflow removal, before
+	moving to TCP_CLOSE.
+
+	The default value matches TCP_TIMEWAIT_LEN. This is a per-namespace
+	sysctl.
+
+	Default: 60
+
+enabled - BOOLEAN
+	Control whether MPTCP sockets can be created.
+
+	MPTCP sockets can be created if the value is 1. This is a
+	per-namespace sysctl.
+
+	Default: 1 (enabled)
+
+path_manager - STRING
+	Set the default path manager name to use for each new MPTCP
+	socket. In-kernel path management will control subflow
+	connections and address advertisements according to
+	per-namespace values configured over the MPTCP netlink
+	API. Userspace path management puts per-MPTCP-connection subflow
+	connection decisions and address advertisements under control of
+	a privileged userspace program, at the cost of more netlink
+	traffic to propagate all of the related events and commands.
+
+	This is a per-namespace sysctl.
+
+	* "kernel"          - In-kernel path manager
+	* "userspace"       - Userspace path manager
+
+	Default: "kernel"
+
+pm_type - INTEGER
+	Set the default path manager type to use for each new MPTCP
+	socket. In-kernel path management will control subflow
+	connections and address advertisements according to
+	per-namespace values configured over the MPTCP netlink
+	API. Userspace path management puts per-MPTCP-connection subflow
+	connection decisions and address advertisements under control of
+	a privileged userspace program, at the cost of more netlink
+	traffic to propagate all of the related events and commands.
+
+	This is a per-namespace sysctl.
+
+	Deprecated since v6.15, use path_manager instead.
+
+	* 0 - In-kernel path manager
+	* 1 - Userspace path manager
+
+	Default: 0
+
+scheduler - STRING
+	Select the scheduler of your choice.
+
+	Support for selection of different schedulers. This is a per-namespace
+	sysctl.
+
+	Default: "default"
+
+stale_loss_cnt - INTEGER
+	The number of MPTCP-level retransmission intervals with no traffic and
+	pending outstanding data on a given subflow required to declare it stale.
+	The packet scheduler ignores stale subflows.
+	A low stale_loss_cnt  value allows for fast active-backup switch-over,
+	an high value maximize links utilization on edge scenarios e.g. lossy
+	link with high BER or peer pausing the data processing.
+
+	This is a per-namespace sysctl.
+
+	Default: 4
+
+syn_retrans_before_tcp_fallback - INTEGER
+	The number of SYN + MP_CAPABLE retransmissions before falling back to
+	TCP, i.e. dropping the MPTCP options. In other words, if all the packets
+	are dropped on the way, there will be:
+
+	* The initial SYN with MPTCP support
+	* This number of SYN retransmitted with MPTCP support
+	* The next SYN retransmissions will be without MPTCP support
+
+	0 means the first retransmission will be done without MPTCP options.
+	>= 128 means that all SYN retransmissions will keep the MPTCP options. A
+	lower number might increase false-positive MPTCP blackholes detections.
+	This is a per-namespace sysctl.
+
+	Default: 2