PCI: Add pci_irq_type() to query the allocated interrupt typegrafted

Add a helper that returns PCI_IRQ_MSIX, PCI_IRQ_MSI, or PCI_IRQ_INTX
based on the interrupt type the PCI core selected after
pci_alloc_irq_vectors().

Several drivers already open-code this check against pdev->msix_enabled
and pdev->msi_enabled, or even open code this helper [1].

A common helper avoids the duplication and keeps drivers from accessing
the bitfield directly (see also [2]).

Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Link: https://elixir.bootlin.com/linux/v7.1/source/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c#L196 [1]
Inspired-by: John Hubbard <jhubbard@nvidia.com>
Link: https://lore.kernel.org/all/DKKG2QM3YJYB.Z2H2B2UXJ75N@kernel.org/ [2]
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260813165234.620555-5-dakr@kernel.org
[ Add missing pci_irq_type() stub for CONFIG_PCI=n. ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>

1 files changed, 78 insertions, 0 deletions

diff --git a/Documentation/networking/ipv6.rst b/Documentation/networking/ipv6.rst
new file mode 100644
index 000000000..ba09c2f2d
--- /dev/null
+++ b/Documentation/networking/ipv6.rst
@@ -0,0 +1,78 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====
+IPv6
+====
+
+
+Options for the ipv6 module are supplied as parameters at load time.
+
+Module options may be given as command line arguments to the insmod
+or modprobe command, but are usually specified in either
+``/etc/modules.d/*.conf`` configuration files, or in a distro-specific
+configuration file.
+
+The available ipv6 module parameters are listed below.  If a parameter
+is not specified the default value is used.
+
+The parameters are as follows:
+
+disable
+
+	Specifies whether to load the IPv6 module, but disable all
+	its functionality.  This might be used when another module
+	has a dependency on the IPv6 module being loaded, but no
+	IPv6 addresses or operations are desired.
+
+	The possible values and their effects are:
+
+	0
+		IPv6 is enabled.
+
+		This is the default value.
+
+	1
+		IPv6 is disabled.
+
+		No IPv6 addresses will be added to interfaces, and
+		it will not be possible to open an IPv6 socket.
+
+		A reboot is required to enable IPv6.
+
+autoconf
+
+	Specifies whether to enable IPv6 address autoconfiguration
+	on all interfaces.  This might be used when one does not wish
+	for addresses to be automatically generated from prefixes
+	received in Router Advertisements.
+
+	The possible values and their effects are:
+
+	0
+		IPv6 address autoconfiguration is disabled on all interfaces.
+
+		Only the IPv6 loopback address (::1) and link-local addresses
+		will be added to interfaces.
+
+	1
+		IPv6 address autoconfiguration is enabled on all interfaces.
+
+		This is the default value.
+
+disable_ipv6
+
+	Specifies whether to disable IPv6 on all interfaces.
+	This might be used when no IPv6 addresses are desired.
+
+	The possible values and their effects are:
+
+	0
+		IPv6 is enabled on all interfaces.
+
+		This is the default value.
+
+	1
+		IPv6 is disabled on all interfaces.
+
+		No IPv6 addresses will be added to interfaces.
+