Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 143 insertions, 0 deletions

diff --git a/Documentation/networking/driver.rst b/Documentation/networking/driver.rst
new file mode 100644
index 000000000..920c0ec98
--- /dev/null
+++ b/Documentation/networking/driver.rst
@@ -0,0 +1,143 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================
+Softnet Driver Issues
+=====================
+
+Probing guidelines
+==================
+
+Address validation
+------------------
+
+Any hardware layer address you obtain for your device should
+be verified.  For example, for ethernet check it with
+linux/etherdevice.h:is_valid_ether_addr()
+
+Close/stop guidelines
+=====================
+
+Quiescence
+----------
+
+After the ndo_stop routine has been called, the hardware must
+not receive or transmit any data.  All in flight packets must
+be aborted. If necessary, poll or wait for completion of
+any reset commands.
+
+Auto-close
+----------
+
+The ndo_stop routine will be called by unregister_netdevice
+if device is still UP.
+
+Transmit path guidelines
+========================
+
+Stop queues in advance
+----------------------
+
+The ndo_start_xmit method must not return NETDEV_TX_BUSY under
+any normal circumstances.  It is considered a hard error unless
+there is no way your device can tell ahead of time when its
+transmit function will become busy.
+
+Instead it must maintain the queue properly.  For example,
+for a driver implementing scatter-gather this means:
+
+.. code-block:: c
+
+	static u32 drv_tx_avail(struct drv_ring *dr)
+	{
+		u32 used = READ_ONCE(dr->prod) - READ_ONCE(dr->cons);
+
+		return dr->tx_ring_size - (used & dr->tx_ring_mask);
+	}
+
+	static netdev_tx_t drv_hard_start_xmit(struct sk_buff *skb,
+					       struct net_device *dev)
+	{
+		struct drv *dp = netdev_priv(dev);
+		struct netdev_queue *txq;
+		struct drv_ring *dr;
+		int idx;
+
+		idx = skb_get_queue_mapping(skb);
+		dr = dp->tx_rings[idx];
+		txq = netdev_get_tx_queue(dev, idx);
+
+		//...
+		/* This should be a very rare race - log it. */
+		if (drv_tx_avail(dr) <= skb_shinfo(skb)->nr_frags + 1) {
+			netif_tx_stop_queue(txq);
+			netdev_warn(dev, "Tx Ring full when queue awake!\n");
+			return NETDEV_TX_BUSY;
+		}
+
+		//... queue packet to card ...
+
+		netdev_tx_sent_queue(txq, skb->len);
+
+		//... update tx producer index using WRITE_ONCE() ...
+
+		if (!netif_txq_maybe_stop(txq, drv_tx_avail(dr),
+					  MAX_SKB_FRAGS + 1, 2 * MAX_SKB_FRAGS))
+			dr->stats.stopped++;
+
+		//...
+		return NETDEV_TX_OK;
+	}
+
+And then at the end of your TX reclamation event handling:
+
+.. code-block:: c
+
+	//... update tx consumer index using WRITE_ONCE() ...
+
+	netif_txq_completed_wake(txq, cmpl_pkts, cmpl_bytes,
+				 drv_tx_avail(dr), 2 * MAX_SKB_FRAGS);
+
+Lockless queue stop / wake helper macros
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. kernel-doc:: include/net/netdev_queues.h
+   :doc: Lockless queue stopping / waking helpers.
+
+The standard macros like netif_txq_maybe_stop(), netif_txq_try_stop() etc.
+are well tested, prefer them over local synchronization schemes.
+
+No exclusive ownership
+----------------------
+
+An ndo_start_xmit method must not modify the shared parts of a
+cloned SKB.
+
+Timely completions
+------------------
+
+Do not forget that once you return NETDEV_TX_OK from your
+ndo_start_xmit method, it is your driver's responsibility to free
+up the SKB and in some finite amount of time.
+
+For example, this means that it is not allowed for your TX
+mitigation scheme to let TX packets "hang out" in the TX
+ring unreclaimed forever if no new TX packets are sent.
+This error can deadlock sockets waiting for send buffer room
+to be freed up.
+
+If you return NETDEV_TX_BUSY from the ndo_start_xmit method, you
+must not keep any reference to that SKB and you must not attempt
+to free it up.
+
+Error message reporting
+=======================
+
+A number of driver configuration interfaces pass a Netlink extended ACK
+(``extack``) object to the driver (either directly as an argument or
+as a member of a parameter struct). The drivers should try to report
+most errors via the ``extack`` object. System level exceptions,
+indicating that system or device is misbehaving or is in bad state,
+should continue to be reported to system logs.
+
+Messages should be passed **either** via ``extack`` **or** to system logs.
+Drivers should not try to report the same information to both.