Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 114 insertions, 0 deletions

diff --git a/Documentation/mm/allocation-profiling.rst b/Documentation/mm/allocation-profiling.rst
new file mode 100644
index 000000000..5389d2411
--- /dev/null
+++ b/Documentation/mm/allocation-profiling.rst
@@ -0,0 +1,114 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================
+MEMORY ALLOCATION PROFILING
+===========================
+
+Low overhead (suitable for production) accounting of all memory allocations,
+tracked by file and line number.
+
+Usage:
+kconfig options:
+- CONFIG_MEM_ALLOC_PROFILING
+
+- CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT
+
+- CONFIG_MEM_ALLOC_PROFILING_DEBUG
+  adds warnings for allocations that weren't accounted because of a
+  missing annotation
+
+Boot parameter:
+  sysctl.vm.mem_profiling={0|1|never}[,compressed]
+
+  When set to "never", memory allocation profiling overhead is minimized and it
+  cannot be enabled at runtime (sysctl becomes read-only).
+  When CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT=y, default value is "1".
+  When CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT=n, default value is "never".
+  "compressed" optional parameter will try to store page tag references in a
+  compact format, avoiding page extensions. This results in improved performance
+  and memory consumption, however it might fail depending on system configuration.
+  If compression fails, a warning is issued and memory allocation profiling gets
+  disabled.
+
+sysctl:
+  /proc/sys/vm/mem_profiling
+
+  1: Enable memory profiling.
+
+  0: Disable memory profiling.
+
+  The default value depends on CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT.
+
+  When CONFIG_MEM_ALLOC_PROFILING_DEBUG=y, this control is read-only to avoid
+  warnings produced by allocations made while profiling is disabled and freed
+  when it's enabled.
+
+Runtime info:
+  /proc/allocinfo
+
+Example output::
+
+  root@moria-kvm:~# sort -g /proc/allocinfo|tail|numfmt --to=iec
+        2.8M    22648 fs/kernfs/dir.c:615 func:__kernfs_new_node
+        3.8M      953 mm/memory.c:4214 func:alloc_anon_folio
+        4.0M     1010 drivers/staging/ctagmod/ctagmod.c:20 [ctagmod] func:ctagmod_start
+        4.1M        4 net/netfilter/nf_conntrack_core.c:2567 func:nf_ct_alloc_hashtable
+        6.0M     1532 mm/filemap.c:1919 func:__filemap_get_folio
+        8.8M     2785 kernel/fork.c:307 func:alloc_thread_stack_node
+         13M      234 block/blk-mq.c:3421 func:blk_mq_alloc_rqs
+         14M     3520 mm/mm_init.c:2530 func:alloc_large_system_hash
+         15M     3656 mm/readahead.c:247 func:page_cache_ra_unbounded
+         55M     4887 mm/slub.c:2259 func:alloc_slab_page
+        122M    31168 mm/page_ext.c:270 func:alloc_page_ext
+
+Theory of operation
+===================
+
+Memory allocation profiling builds off of code tagging, which is a library for
+declaring static structs (that typically describe a file and line number in
+some way, hence code tagging) and then finding and operating on them at runtime,
+- i.e. iterating over them to print them in debugfs/procfs.
+
+To add accounting for an allocation call, we replace it with a macro
+invocation, alloc_hooks(), that
+- declares a code tag
+- stashes a pointer to it in task_struct
+- calls the real allocation function
+- and finally, restores the task_struct alloc tag pointer to its previous value.
+
+This allows for alloc_hooks() calls to be nested, with the most recent one
+taking effect. This is important for allocations internal to the mm/ code that
+do not properly belong to the outer allocation context and should be counted
+separately: for example, slab object extension vectors, or when the slab
+allocates pages from the page allocator.
+
+Thus, proper usage requires determining which function in an allocation call
+stack should be tagged. There are many helper functions that essentially wrap
+e.g. kmalloc() and do a little more work, then are called in multiple places;
+we'll generally want the accounting to happen in the callers of these helpers,
+not in the helpers themselves.
+
+To fix up a given helper, for example foo(), do the following:
+- switch its allocation call to the _noprof() version, e.g. kmalloc_noprof()
+
+- rename it to foo_noprof()
+
+- define a macro version of foo() like so:
+
+  #define foo(...) alloc_hooks(foo_noprof(__VA_ARGS__))
+
+It's also possible to stash a pointer to an alloc tag in your own data structures.
+
+Do this when you're implementing a generic data structure that does allocations
+"on behalf of" some other code - for example, the rhashtable code. This way,
+instead of seeing a large line in /proc/allocinfo for rhashtable.c, we can
+break it out by rhashtable type.
+
+To do so:
+- Hook your data structure's init function, like any other allocation function.
+
+- Within your init function, use the convenience macro alloc_tag_record() to
+  record alloc tag in your data structure.
+
+- Then, use the following form for your allocations:
+  alloc_hooks_tag(ht->your_saved_tag, kmalloc_noprof(...))