diff options
| author | Sean Christopherson <seanjc@google.com> | 2026-09-23 09:37:21 -0700 |
|---|---|---|
| committer | Paolo Bonzini <pbonzini@redhat.com> | 2026-09-26 00:39:55 -0400 |
| commit | 93de2a6a4b91b72607136dd656edf03fb399d27f (patch) | |
| tree | 9220c76eb23cb39a146fac9692ee69afa4aa3135 /Documentation/locking/hwspinlock.rst | |
| download | linux-stable-93de2a6a4b91b72607136dd656edf03fb399d27f.tar.gz linux-stable-93de2a6a4b91b72607136dd656edf03fb399d27f.zip | |
KVM: SEV: Do cache maintenance on the source VM during intra-host migrationgrafted
Manually perform cache maintenance on the source VM during intra-host
migration to ensure no stale data is left in CPU caches after the VM is
destroyed. Because the source VM is "converted" to a non-SEV VM, KVM's
memory reclaim flows won't trigger cache maintenance, e.g. when all guest
memory is reclaimed in response to detaching from the mmu_notifier.
Note, relying on the destination VM to do cache maintenance isn't an option
as KVM doesn't require identical guest memory configurations, i.e. the
source VM may have access to memory that the destination VM does not.
Enforcing equivalent memory configurations is infeasible, as it would
require a *deep* comparison of memslots, e.g. to verify that not only are
the memslot identical, but what the memslots point at is also identical.
Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration")
Cc: stable@vger.kernel.org
Reported-by: Stefan Teodorescu <fane@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260923163721.1584779-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Diffstat (limited to 'Documentation/locking/hwspinlock.rst')
| -rw-r--r-- | Documentation/locking/hwspinlock.rst | 441 |
1 files changed, 441 insertions, 0 deletions
diff --git a/Documentation/locking/hwspinlock.rst b/Documentation/locking/hwspinlock.rst new file mode 100644 index 000000000..a737c702a --- /dev/null +++ b/Documentation/locking/hwspinlock.rst @@ -0,0 +1,441 @@ +=========================== +Hardware Spinlock Framework +=========================== + +Introduction +============ + +Hardware spinlock modules provide hardware assistance for synchronization +and mutual exclusion between heterogeneous processors and those not operating +under a single, shared operating system. + +For example, OMAP4 has dual Cortex-A9, dual Cortex-M3 and a C64x+ DSP, +each of which is running a different Operating System (the master, A9, +is usually running Linux and the slave processors, the M3 and the DSP, +are running some flavor of RTOS). + +A generic hwspinlock framework allows platform-independent drivers to use +the hwspinlock device in order to access data structures that are shared +between remote processors, that otherwise have no alternative mechanism +to accomplish synchronization and mutual exclusion operations. + +This is necessary, for example, for Inter-processor communications: +on OMAP4, cpu-intensive multimedia tasks are offloaded by the host to the +remote M3 and/or C64x+ slave processors (by an IPC subsystem called Syslink). + +To achieve fast message-based communications, a minimal kernel support +is needed to deliver messages arriving from a remote processor to the +appropriate user process. + +This communication is based on simple data structures that is shared between +the remote processors, and access to it is synchronized using the hwspinlock +module (remote processor directly places new messages in this shared data +structure). + +A common hwspinlock interface makes it possible to have generic, platform- +independent, drivers. + +User API +======== + +:: + + struct hwspinlock *hwspin_lock_request_specific(unsigned int id); + +Assign a specific hwspinlock id and return its address, or NULL +if that hwspinlock is already in use. Usually board code will +be calling this function in order to reserve specific hwspinlock +ids for predefined purposes. + +Should be called from a process context (might sleep). + +:: + + int of_hwspin_lock_get_id(struct device_node *np, int index); + +Retrieve the global lock id for an OF phandle-based specific lock. +This function provides a means for DT users of a hwspinlock module +to get the global lock id of a specific hwspinlock, so that it can +be requested using the normal hwspin_lock_request_specific() API. + +The function returns a lock id number on success, -EPROBE_DEFER if +the hwspinlock device is not yet registered with the core, or other +error values. + +Should be called from a process context (might sleep). + +:: + + int hwspin_lock_free(struct hwspinlock *hwlock); + +Free a previously-assigned hwspinlock; returns 0 on success, or an +appropriate error code on failure (e.g. -EINVAL if the hwspinlock +is already free). + +Should be called from a process context (might sleep). + +:: + + int hwspin_lock_bust(struct hwspinlock *hwlock, unsigned int id); + +After verifying the owner of the hwspinlock, release a previously acquired +hwspinlock; returns 0 on success, or an appropriate error code on failure +(e.g. -EOPNOTSUPP if the bust operation is not defined for the specific +hwspinlock). + +Should be called from a process context (might sleep). + +:: + + int hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int timeout); + +Lock a previously-assigned hwspinlock with a timeout limit (specified in +msecs). If the hwspinlock is already taken, the function will busy loop +waiting for it to be released, but give up when the timeout elapses. +Upon a successful return from this function, preemption is disabled so +the caller must not sleep, and is advised to release the hwspinlock as +soon as possible, in order to minimize remote cores polling on the +hardware interconnect. + +Returns 0 when successful and an appropriate error code otherwise (most +notably -ETIMEDOUT if the hwspinlock is still busy after timeout msecs). +The function will never sleep. + +:: + + int hwspin_lock_timeout_irq(struct hwspinlock *hwlock, unsigned int timeout); + +Lock a previously-assigned hwspinlock with a timeout limit (specified in +msecs). If the hwspinlock is already taken, the function will busy loop +waiting for it to be released, but give up when the timeout elapses. +Upon a successful return from this function, preemption and the local +interrupts are disabled, so the caller must not sleep, and is advised to +release the hwspinlock as soon as possible. + +Returns 0 when successful and an appropriate error code otherwise (most +notably -ETIMEDOUT if the hwspinlock is still busy after timeout msecs). +The function will never sleep. + +:: + + int hwspin_lock_timeout_irqsave(struct hwspinlock *hwlock, unsigned int to, + unsigned long *flags); + +Lock a previously-assigned hwspinlock with a timeout limit (specified in +msecs). If the hwspinlock is already taken, the function will busy loop +waiting for it to be released, but give up when the timeout elapses. +Upon a successful return from this function, preemption is disabled, +local interrupts are disabled and their previous state is saved at the +given flags placeholder. The caller must not sleep, and is advised to +release the hwspinlock as soon as possible. + +Returns 0 when successful and an appropriate error code otherwise (most +notably -ETIMEDOUT if the hwspinlock is still busy after timeout msecs). + +The function will never sleep. + +:: + + int hwspin_lock_timeout_raw(struct hwspinlock *hwlock, unsigned int timeout); + +Lock a previously-assigned hwspinlock with a timeout limit (specified in +msecs). If the hwspinlock is already taken, the function will busy loop +waiting for it to be released, but give up when the timeout elapses. + +Caution: User must protect the routine of getting hardware lock with mutex +or spinlock to avoid dead-lock, that will let user can do some time-consuming +or sleepable operations under the hardware lock. + +Returns 0 when successful and an appropriate error code otherwise (most +notably -ETIMEDOUT if the hwspinlock is still busy after timeout msecs). + +The function will never sleep. + +:: + + int hwspin_lock_timeout_in_atomic(struct hwspinlock *hwlock, unsigned int to); + +Lock a previously-assigned hwspinlock with a timeout limit (specified in +msecs). If the hwspinlock is already taken, the function will busy loop +waiting for it to be released, but give up when the timeout elapses. + +This function shall be called only from an atomic context and the timeout +value shall not exceed a few msecs. + +Returns 0 when successful and an appropriate error code otherwise (most +notably -ETIMEDOUT if the hwspinlock is still busy after timeout msecs). + +The function will never sleep. + +:: + + int hwspin_trylock(struct hwspinlock *hwlock); + + +Attempt to lock a previously-assigned hwspinlock, but immediately fail if +it is already taken. + +Upon a successful return from this function, preemption is disabled so +caller must not sleep, and is advised to release the hwspinlock as soon as +possible, in order to minimize remote cores polling on the hardware +interconnect. + +Returns 0 on success and an appropriate error code otherwise (most +notably -EBUSY if the hwspinlock was already taken). +The function will never sleep. + +:: + + int hwspin_trylock_irq(struct hwspinlock *hwlock); + + +Attempt to lock a previously-assigned hwspinlock, but immediately fail if +it is already taken. + +Upon a successful return from this function, preemption and the local +interrupts are disabled so caller must not sleep, and is advised to +release the hwspinlock as soon as possible. + +Returns 0 on success and an appropriate error code otherwise (most +notably -EBUSY if the hwspinlock was already taken). + +The function will never sleep. + +:: + + int hwspin_trylock_irqsave(struct hwspinlock *hwlock, unsigned long *flags); + +Attempt to lock a previously-assigned hwspinlock, but immediately fail if +it is already taken. + +Upon a successful return from this function, preemption is disabled, +the local interrupts are disabled and their previous state is saved +at the given flags placeholder. The caller must not sleep, and is advised +to release the hwspinlock as soon as possible. + +Returns 0 on success and an appropriate error code otherwise (most +notably -EBUSY if the hwspinlock was already taken). +The function will never sleep. + +:: + + int hwspin_trylock_raw(struct hwspinlock *hwlock); + +Attempt to lock a previously-assigned hwspinlock, but immediately fail if +it is already taken. + +Caution: User must protect the routine of getting hardware lock with mutex +or spinlock to avoid dead-lock, that will let user can do some time-consuming +or sleepable operations under the hardware lock. + +Returns 0 on success and an appropriate error code otherwise (most +notably -EBUSY if the hwspinlock was already taken). +The function will never sleep. + +:: + + int hwspin_trylock_in_atomic(struct hwspinlock *hwlock); + +Attempt to lock a previously-assigned hwspinlock, but immediately fail if +it is already taken. + +This function shall be called only from an atomic context. + +Returns 0 on success and an appropriate error code otherwise (most +notably -EBUSY if the hwspinlock was already taken). +The function will never sleep. + +:: + + void hwspin_unlock(struct hwspinlock *hwlock); + +Unlock a previously-locked hwspinlock. Always succeed, and can be called +from any context (the function never sleeps). + +.. note:: + + code should **never** unlock an hwspinlock which is already unlocked + (there is no protection against this). + +:: + + void hwspin_unlock_irq(struct hwspinlock *hwlock); + +Unlock a previously-locked hwspinlock and enable local interrupts. +The caller should **never** unlock an hwspinlock which is already unlocked. + +Doing so is considered a bug (there is no protection against this). +Upon a successful return from this function, preemption and local +interrupts are enabled. This function will never sleep. + +:: + + void + hwspin_unlock_irqrestore(struct hwspinlock *hwlock, unsigned long *flags); + +Unlock a previously-locked hwspinlock. + +The caller should **never** unlock an hwspinlock which is already unlocked. +Doing so is considered a bug (there is no protection against this). +Upon a successful return from this function, preemption is reenabled, +and the state of the local interrupts is restored to the state saved at +the given flags. This function will never sleep. + +:: + + void hwspin_unlock_raw(struct hwspinlock *hwlock); + +Unlock a previously-locked hwspinlock. + +The caller should **never** unlock an hwspinlock which is already unlocked. +Doing so is considered a bug (there is no protection against this). +This function will never sleep. + +:: + + void hwspin_unlock_in_atomic(struct hwspinlock *hwlock); + +Unlock a previously-locked hwspinlock. + +The caller should **never** unlock an hwspinlock which is already unlocked. +Doing so is considered a bug (there is no protection against this). +This function will never sleep. + +Typical usage +============= + +:: + + #include <linux/hwspinlock.h> + #include <linux/err.h> + + int hwspinlock_example(void) + { + struct hwspinlock *hwlock; + int ret; + + /* + * assign a specific hwspinlock id - this should be called early + * by board init code. + */ + hwlock = hwspin_lock_request_specific(PREDEFINED_LOCK_ID); + if (!hwlock) + ... + + /* try to take it, but don't spin on it */ + ret = hwspin_trylock(hwlock); + if (!ret) { + pr_info("lock is already taken\n"); + return -EBUSY; + } + + /* + * we took the lock, do our thing now, but do NOT sleep + */ + + /* release the lock */ + hwspin_unlock(hwlock); + + /* free the lock */ + ret = hwspin_lock_free(hwlock); + if (ret) + ... + + return ret; + } + + +API for implementors +==================== + +:: + + int hwspin_lock_register(struct hwspinlock_device *bank, struct device *dev, + const struct hwspinlock_ops *ops, int base_id, int num_locks); + +To be called from the underlying platform-specific implementation, in +order to register a new hwspinlock device (which is usually a bank of +numerous locks). Should be called from a process context (this function +might sleep). + +Returns 0 on success, or appropriate error code on failure. + +:: + + int hwspin_lock_unregister(struct hwspinlock_device *bank); + +To be called from the underlying vendor-specific implementation, in order +to unregister an hwspinlock device (which is usually a bank of numerous +locks). + +Should be called from a process context (this function might sleep). + +Returns the address of hwspinlock on success, or NULL on error (e.g. +if the hwspinlock is still in use). + +Important structs +================= + +struct hwspinlock_device is a device which usually contains a bank +of hardware locks. It is registered by the underlying hwspinlock +implementation using the hwspin_lock_register() API. + +:: + + /** + * struct hwspinlock_device - a device which usually spans numerous hwspinlocks + * @dev: underlying device, will be used to invoke runtime PM api + * @ops: platform-specific hwspinlock handlers + * @base_id: id index of the first lock in this device + * @num_locks: number of locks in this device + * @lock: dynamically allocated array of 'struct hwspinlock' + */ + struct hwspinlock_device { + struct device *dev; + const struct hwspinlock_ops *ops; + int base_id; + int num_locks; + struct hwspinlock lock[0]; + }; + +struct hwspinlock_device contains an array of hwspinlock structs, each +of which represents a single hardware lock:: + + /** + * struct hwspinlock - this struct represents a single hwspinlock instance + * @bank: the hwspinlock_device structure which owns this lock + * @lock: initialized and used by hwspinlock core + * @priv: private data, owned by the underlying platform-specific hwspinlock drv + */ + struct hwspinlock { + struct hwspinlock_device *bank; + spinlock_t lock; + void *priv; + }; + +When registering a bank of locks, the hwspinlock driver only needs to +set the priv members of the locks. The rest of the members are set and +initialized by the hwspinlock core itself. + +Implementation callbacks +======================== + +There are three possible callbacks defined in 'struct hwspinlock_ops':: + + struct hwspinlock_ops { + int (*trylock)(struct hwspinlock *lock); + void (*unlock)(struct hwspinlock *lock); + void (*relax)(struct hwspinlock *lock); + }; + +The first two callbacks are mandatory: + +The ->trylock() callback should make a single attempt to take the lock, and +return 0 on failure and 1 on success. This callback may **not** sleep. + +The ->unlock() callback releases the lock. It always succeed, and it, too, +may **not** sleep. + +The ->relax() callback is optional. It is called by hwspinlock core while +spinning on a lock, and can be used by the underlying implementation to force +a delay between two successive invocations of ->trylock(). It may **not** sleep. |
