Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 210 insertions, 0 deletions

diff --git a/Documentation/input/gamepad.rst b/Documentation/input/gamepad.rst
new file mode 100644
index 000000000..ddc65fa36
--- /dev/null
+++ b/Documentation/input/gamepad.rst
@@ -0,0 +1,210 @@
+---------------------------
+Linux Gamepad Specification
+---------------------------
+
+:Author: 2013 by David Herrmann <dh.herrmann@gmail.com>
+
+
+Introduction
+~~~~~~~~~~~~
+Linux provides many different input drivers for gamepad hardware. To avoid
+having user-space deal with different button-mappings for each gamepad, this
+document defines how gamepads are supposed to report their data.
+
+Geometry
+~~~~~~~~
+As "gamepad" we define devices which roughly look like this::
+
+            ____________________________              __
+           / [__ZL__]          [__ZR__] \               |
+          / [__ TL __]        [__ TR __] \              | Front Triggers
+       __/________________________________\__         __|
+      /                                  _   \          |
+     /      /\           __             (N)   \         |
+    /       ||      __  |MO|  __     _       _ \        | Main Pad
+   |    <===DP===> |SE|      |ST|   (W) -|- (E) |       |
+    \       ||    ___          ___       _     /        |
+    /\      \/   /   \        /   \     (S)   /\      __|
+   /  \________ | LS  | ____ |  RS | ________/  \       |
+  |         /  \ \___/ /    \ \___/ /  \         |      | Control Sticks
+  |        /    \_____/      \_____/    \        |    __|
+  |       /                              \       |
+   \_____/                                \_____/
+
+       |________|______|    |______|___________|
+         D-Pad    Left       Right   Action Pad
+                 Stick       Stick
+
+                   |_____________|
+                      Menu Pad
+
+Most gamepads have the following features:
+
+  - Action-Pad
+    4 buttons in diamonds-shape (on the right side). The buttons are
+    differently labeled on most devices so we define them as NORTH,
+    SOUTH, WEST and EAST.
+  - D-Pad (Direction-pad)
+    4 buttons (on the left side) that point up, down, left and right.
+  - Menu-Pad
+    Different constellations, but most-times 2 buttons: SELECT - START
+    Furthermore, many gamepads have a fancy branded button that is used as
+    special system-button. It often looks different to the other buttons and
+    is used to pop up system-menus or system-settings.
+  - Analog-Sticks
+    Analog-sticks provide freely moveable sticks to control directions. Not
+    all devices have both or any, but they are present at most times.
+    Analog-sticks may also provide a digital button if you press them.
+  - Triggers
+    Triggers are located on the upper-side of the pad in vertical direction.
+    Not all devices provide them, but the upper buttons are normally named
+    Left- and Right-Triggers, the lower buttons Z-Left and Z-Right.
+  - Rumble
+    Many devices provide force-feedback features. But are mostly just
+    simple rumble motors.
+
+Detection
+~~~~~~~~~
+
+All gamepads that follow the protocol described here map BTN_GAMEPAD. This is
+an alias for BTN_SOUTH/BTN_A. It can be used to identify a gamepad as such.
+However, not all gamepads provide all features, so you need to test for all
+features that you need, first. How each feature is mapped is described below.
+
+Legacy drivers often don't comply to these rules. As we cannot change them
+for backwards-compatibility reasons, you need to provide fixup mappings in
+user-space yourself. Some of them might also provide module-options that
+change the mappings so you can advise users to set these.
+
+All new gamepads are supposed to comply with this mapping. Please report any
+bugs, if they don't.
+
+There are a lot of less-featured/less-powerful devices out there, which reuse
+the buttons from this protocol. However, they try to do this in a compatible
+fashion. For example, the "Nintendo Wii Nunchuk" provides two trigger buttons
+and one analog stick. It reports them as if it were a gamepad with only one
+analog stick and two trigger buttons on the right side.
+But that means, that if you only support "real" gamepads, you must test
+devices for _all_ reported events that you need. Otherwise, you will also get
+devices that report a small subset of the events.
+
+No other devices, that do not look/feel like a gamepad, shall report these
+events.
+
+Events
+~~~~~~
+
+Gamepads report the following events:
+
+- Action-Pad:
+
+  Every gamepad device has at least 2 action buttons. This means, that every
+  device reports BTN_SOUTH (which BTN_GAMEPAD is an alias for). Regardless
+  of the labels on the buttons, the codes are sent according to the
+  physical position of the buttons.
+
+  Please note that 2- and 3-button pads are fairly rare and old. You might
+  want to filter gamepads that do not report all four.
+
+    - 2-Button Pad:
+
+      If only 2 action-buttons are present, they are reported as BTN_SOUTH and
+      BTN_EAST. For vertical layouts, the upper button is BTN_EAST. For
+      horizontal layouts, the button more on the right is BTN_EAST.
+
+    - 3-Button Pad:
+
+      If only 3 action-buttons are present, they are reported as (from left
+      to right): BTN_WEST, BTN_SOUTH, BTN_EAST
+      If the buttons are aligned perfectly vertically, they are reported as
+      (from top down): BTN_WEST, BTN_SOUTH, BTN_EAST
+
+    - 4-Button Pad:
+
+      If all 4 action-buttons are present, they can be aligned in two
+      different formations. If diamond-shaped, they are reported as BTN_NORTH,
+      BTN_WEST, BTN_SOUTH, BTN_EAST according to their physical location.
+      If rectangular-shaped, the upper-left button is BTN_NORTH, lower-left
+      is BTN_WEST, lower-right is BTN_SOUTH and upper-right is BTN_EAST.
+
+- D-Pad:
+
+  Every gamepad provides a D-Pad with four directions: Up, Down, Left, Right
+  Some of these are available as digital buttons, some as analog buttons. Some
+  may even report both. The kernel does not convert between these so
+  applications should support both and choose what is more appropriate if
+  both are reported.
+
+    - Digital buttons are reported as:
+
+      BTN_DPAD_*
+
+    - Analog buttons are reported as:
+
+      ABS_HAT0X and ABS_HAT0Y
+
+  (for ABS values negative is left/up, positive is right/down)
+
+- Analog-Sticks:
+
+  The left analog-stick is reported as ABS_X, ABS_Y. The right analog stick is
+  reported as ABS_RX, ABS_RY. Zero, one or two sticks may be present.
+  If analog-sticks provide digital buttons, they are mapped accordingly as
+  BTN_THUMBL (first/left) and BTN_THUMBR (second/right).
+
+  (for ABS values negative is left/up, positive is right/down)
+
+- Triggers:
+
+  Trigger buttons can be available as digital or analog buttons or both. User-
+  space must correctly deal with any situation and choose the most appropriate
+  mode.
+
+  Upper trigger buttons are reported as BTN_TR or ABS_HAT1X (right) and BTN_TL
+  or ABS_HAT1Y (left). Lower trigger buttons are reported as BTN_TR2 or
+  ABS_HAT2X (right/ZR) and BTN_TL2 or ABS_HAT2Y (left/ZL).
+
+  If only one trigger-button combination is present (upper+lower), they are
+  reported as "right" triggers (BTN_TR/ABS_HAT1X).
+
+  (ABS trigger values start at 0, pressure is reported as positive values)
+
+- Menu-Pad:
+
+  Menu buttons are always digital and are mapped according to their location
+  instead of their labels. That is:
+
+    - 1-button Pad:
+
+      Mapped as BTN_START
+
+    - 2-button Pad:
+
+      Left button mapped as BTN_SELECT, right button mapped as BTN_START
+
+  Many pads also have a third button which is branded or has a special symbol
+  and meaning. Such buttons are mapped as BTN_MODE. Examples are the Nintendo
+  "HOME" button, the Xbox "X" button or the Sony PlayStation "PS" button.
+
+- Rumble:
+
+  Rumble is advertised as FF_RUMBLE.
+
+- Grip buttons:
+
+  Many pads include buttons on the rear, usually referred to as either grip or
+  rear buttons, or paddles. These are often reprogrammable by the firmware to
+  appear as "normal" buttons, but are sometimes exposed to software too. Some
+  notable examples of this are the Steam Deck, which has R4, R5, L4, and L5 on
+  the back; the Xbox Elite pads, which have P1-P4; and the Switch 2 Pro
+  Controller, which has GL and GR.
+
+  For these controllers, BTN_GRIPR and BTN_GRIPR2 should be used for the top
+  and bottom (if present) right grip button(s), and BTN_GRIPL and BTN_GRIPL2
+  should be used for the top and bottom (if present) left grip button(s).
+
+- Profile:
+
+  Some pads provide a multi-value profile selection switch. Examples include
+  the Xbox Adaptive and the Xbox Elite 2 controllers. When the active profile
+  is switched, its newly selected value is emitted as an ABS_PROFILE event.