Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 135 insertions, 0 deletions

diff --git a/Documentation/input/devices/rotary-encoder.rst b/Documentation/input/devices/rotary-encoder.rst
new file mode 100644
index 000000000..5865748c1
--- /dev/null
+++ b/Documentation/input/devices/rotary-encoder.rst
@@ -0,0 +1,135 @@
+============================================================
+rotary-encoder - a generic driver for GPIO connected devices
+============================================================
+
+:Author: Daniel Mack <daniel@caiaq.de>, Feb 2009
+
+Function
+--------
+
+Rotary encoders are devices which are connected to the CPU or other
+peripherals with two wires. The outputs are phase-shifted by 90 degrees
+and by triggering on falling and rising edges, the turn direction can
+be determined.
+
+Some encoders have both outputs low in stable states, others also have
+a stable state with both outputs high (half-period mode) and some have
+a stable state in all steps (quarter-period mode).
+
+The phase diagram of these two outputs look like this::
+
+                  _____       _____       _____
+                 |     |     |     |     |     |
+  Channel A  ____|     |_____|     |_____|     |____
+
+                 :  :  :  :  :  :  :  :  :  :  :  :
+            __       _____       _____       _____
+              |     |     |     |     |     |     |
+  Channel B   |_____|     |_____|     |_____|     |__
+
+                 :  :  :  :  :  :  :  :  :  :  :  :
+  Event          a  b  c  d  a  b  c  d  a  b  c  d
+
+                |<-------->|
+	          one step
+
+                |<-->|
+	          one step (half-period mode)
+
+                |<>|
+	          one step (quarter-period mode)
+
+For more information, please see
+	https://en.wikipedia.org/wiki/Rotary_encoder
+
+
+Events / state machine
+----------------------
+
+In half-period mode, state a) and c) above are used to determine the
+rotational direction based on the last stable state. Events are reported in
+states b) and d) given that the new stable state is different from the last
+(i.e. the rotation was not reversed half-way).
+
+Otherwise, the following apply:
+
+a) Rising edge on channel A, channel B in low state
+	This state is used to recognize a clockwise turn
+
+b) Rising edge on channel B, channel A in high state
+	When entering this state, the encoder is put into 'armed' state,
+	meaning that there it has seen half the way of a one-step transition.
+
+c) Falling edge on channel A, channel B in high state
+	This state is used to recognize a counter-clockwise turn
+
+d) Falling edge on channel B, channel A in low state
+	Parking position. If the encoder enters this state, a full transition
+	should have happened, unless it flipped back on half the way. The
+	'armed' state tells us about that.
+
+Platform requirements
+---------------------
+
+As there is no hardware dependent call in this driver, the platform it is
+used with must support gpiolib. Another requirement is that IRQs must be
+able to fire on both edges.
+
+
+Board integration
+-----------------
+
+To use this driver in your system, register a platform_device with the
+name 'rotary-encoder' and associate the IRQs and some specific platform
+data with it. Because the driver uses generic device properties, this can
+be done either via device tree, ACPI, or using static board files, like in
+example below:
+
+::
+
+	/* board support file example */
+
+	#include <linux/input.h>
+	#include <linux/gpio/machine.h>
+	#include <linux/property.h>
+
+	#define GPIO_ROTARY_A 1
+	#define GPIO_ROTARY_B 2
+
+	static struct gpiod_lookup_table rotary_encoder_gpios = {
+		.dev_id = "rotary-encoder.0",
+		.table = {
+			GPIO_LOOKUP_IDX("gpio-0",
+					GPIO_ROTARY_A, NULL, 0, GPIO_ACTIVE_LOW),
+			GPIO_LOOKUP_IDX("gpio-0",
+					GPIO_ROTARY_B, NULL, 1, GPIO_ACTIVE_HIGH),
+			{ },
+		},
+	};
+
+	static const struct property_entry rotary_encoder_properties[] = {
+		PROPERTY_ENTRY_U32("rotary-encoder,steps-per-period", 24),
+		PROPERTY_ENTRY_U32("linux,axis",		      ABS_X),
+		PROPERTY_ENTRY_U32("rotary-encoder,relative_axis",    0),
+		{ },
+	};
+
+	static const struct software_node rotary_encoder_node = {
+		.properties = rotary_encoder_properties,
+	};
+
+	static struct platform_device rotary_encoder_device = {
+		.name		= "rotary-encoder",
+		.id		= 0,
+	};
+
+	...
+
+	gpiod_add_lookup_table(&rotary_encoder_gpios);
+	device_add_software_node(&rotary_encoder_device.dev, &rotary_encoder_node);
+	platform_device_register(&rotary_encoder_device);
+
+	...
+
+Please consult device tree binding documentation to see all properties
+supported by the driver.