scftorture: Count single_rpc offline failures in statistics outputgrafted

scf_torture_stats_print() aggregates each invoker thread's counters
into a local scf_statistics structure before printing, but the
n_single_rpc_ofl field is missing from the aggregation loop.  As a
result, the "single_rpc_ofl" value printed in the statistics line is
always zero, even when smp_call_function_single() invocations for the
RPC test have failed due to offline CPUs and been counted by the
invoker threads.

Add the missing accumulation so that the printed value reflects the
actual counts.

Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

1 files changed, 94 insertions, 0 deletions

diff --git a/Documentation/input/devices/appletouch.rst b/Documentation/input/devices/appletouch.rst
new file mode 100644
index 000000000..c94470e66
--- /dev/null
+++ b/Documentation/input/devices/appletouch.rst
@@ -0,0 +1,94 @@
+.. include:: <isonum.txt>
+
+----------------------------------
+Apple Touchpad Driver (appletouch)
+----------------------------------
+
+:Copyright: |copy| 2005 Stelian Pop <stelian@popies.net>
+
+appletouch is a Linux kernel driver for the USB touchpad found on post
+February 2005 and October 2005 Apple Aluminium Powerbooks.
+
+This driver is derived from Johannes Berg's appletrackpad driver [#f1]_,
+but it has been improved in some areas:
+
+	* appletouch is a full kernel driver, no userspace program is necessary
+	* appletouch can be interfaced with the synaptics X11 driver, in order
+	  to have touchpad acceleration, scrolling, etc.
+
+Credits go to Johannes Berg for reverse-engineering the touchpad protocol,
+Frank Arnold for further improvements, and Alex Harper for some additional
+information about the inner workings of the touchpad sensors. Michael
+Hanselmann added support for the October 2005 models.
+
+Usage
+-----
+
+In order to use the touchpad in the basic mode, compile the driver and load
+the module. A new input device will be detected and you will be able to read
+the mouse data from /dev/input/mice (using gpm, or X11).
+
+In X11, you can configure the touchpad to use the synaptics X11 driver, which
+will give additional functionalities, like acceleration, scrolling, 2 finger
+tap for middle button mouse emulation, 3 finger tap for right button mouse
+emulation, etc. In order to do this, make sure you're using a recent version of
+the synaptics driver (tested with 0.14.2, available from [#f2]_), and configure
+a new input device in your X11 configuration file (take a look below for an
+example). For additional configuration, see the synaptics driver documentation::
+
+	Section "InputDevice"
+		Identifier      "Synaptics Touchpad"
+		Driver          "synaptics"
+		Option          "SendCoreEvents"        "true"
+		Option          "Device"                "/dev/input/mice"
+		Option          "Protocol"              "auto-dev"
+		Option		"LeftEdge"		"0"
+		Option		"RightEdge"		"850"
+		Option		"TopEdge"		"0"
+		Option		"BottomEdge"		"645"
+		Option		"MinSpeed"		"0.4"
+		Option		"MaxSpeed"		"1"
+		Option		"AccelFactor"		"0.02"
+		Option		"FingerLow"		"0"
+		Option		"FingerHigh"		"30"
+		Option		"MaxTapMove"		"20"
+		Option		"MaxTapTime"		"100"
+		Option		"HorizScrollDelta"	"0"
+		Option		"VertScrollDelta"	"30"
+		Option		"SHMConfig"		"on"
+	EndSection
+
+	Section "ServerLayout"
+		...
+		InputDevice	"Mouse"
+		InputDevice	"Synaptics Touchpad"
+	...
+	EndSection
+
+Fuzz problems
+-------------
+
+The touchpad sensors are very sensitive to heat, and will generate a lot of
+noise when the temperature changes. This is especially true when you power-on
+the laptop for the first time.
+
+The appletouch driver tries to handle this noise and auto adapt itself, but it
+is not perfect. If finger movements are not recognized anymore, try reloading
+the driver.
+
+You can activate debugging using the 'debug' module parameter. A value of 0
+deactivates any debugging, 1 activates tracing of invalid samples, 2 activates
+full tracing (each sample is being traced)::
+
+	modprobe appletouch debug=1
+
+or::
+
+	echo "1" > /sys/module/appletouch/parameters/debug
+
+
+.. Links:
+
+.. [#f1] http://johannes.sipsolutions.net/PowerBook/touchpad/
+
+.. [#f2] `<http://web.archive.org/web/*/http://web.telia.com/~u89404340/touchpad/index.html>`_