drm/mediatek: Add missing IS_ERR check for ovl_adaptor platform devicegrafted

platform_device_register_data() can fail and return an ERR_PTR, but the
return value is used without checking, leading to an invalid pointer
being stored in ddp_comp[].dev and passed to component_match_add() and
mtk_ddp_comp_init(), which could result in a kernel crash.

Add an IS_ERR() check to jump to the error handling path on failure.

Fixes: 0d9eee9118b7 ("drm/mediatek: Add drm ovl_adaptor sub driver for MT8195")
Cc: stable@vger.kernel.org
Signed-off-by: Haojie Li <lihaojie@kylinos.cn>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20260825100845.438893-1-lihaojie@kylinos.cn/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

1 files changed, 73 insertions, 0 deletions

diff --git a/Documentation/hwmon/tmp464.rst b/Documentation/hwmon/tmp464.rst
new file mode 100644
index 000000000..7596e7623
--- /dev/null
+++ b/Documentation/hwmon/tmp464.rst
@@ -0,0 +1,73 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver tmp464
+====================
+
+Supported chips:
+
+  * Texas Instruments TMP464
+
+    Prefix: 'tmp464'
+
+    Addresses scanned: I2C 0x48, 0x49, 0x4a and 0x4b
+
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp464.html
+
+  * Texas Instruments TMP468
+
+    Prefix: 'tmp468'
+
+    Addresses scanned: I2C 0x48, 0x49, 0x4a and 0x4b
+
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp468.html
+
+Authors:
+
+	Agathe Porte <agathe.porte@nokia.com>
+	Guenter Roeck <linux@roeck-us.net>
+
+Description
+-----------
+
+This driver implements support for Texas Instruments TMP464 and TMP468
+temperature sensor chips. TMP464 provides one local and four remote
+sensors. TMP468 provides one local and eight remote sensors.
+Temperature is measured in degrees Celsius. The chips are wired over
+I2C/SMBus and specified over a temperature range of -40 to +125 degrees
+Celsius. Resolution for both the local and remote channels is 0.0625
+degree C.
+
+The chips support only temperature measurements. The driver exports
+temperature values, limits, and alarms via the following sysfs files:
+
+**temp[1-9]_input**
+
+**temp[1-9]_max**
+
+**temp[1-9]_max_hyst**
+
+**temp[1-9]_max_alarm**
+
+**temp[1-9]_crit**
+
+**temp[1-9]_crit_alarm**
+
+**temp[1-9]_crit_hyst**
+
+**temp[2-9]_offset**
+
+**temp[2-9]_fault**
+
+Each sensor can be individually disabled via Devicetree or from sysfs
+via:
+
+**temp[1-9]_enable**
+
+If labels were specified in Devicetree, additional sysfs files will
+be present:
+
+**temp[1-9]_label**
+
+The update interval is configurable with the following sysfs attribute.
+
+**update_interval**