KVM: SEV: Do cache maintenance on the source VM during intra-host migrationgrafted

Manually perform cache maintenance on the source VM during intra-host
migration to ensure no stale data is left in CPU caches after the VM is
destroyed.  Because the source VM is "converted" to a non-SEV VM, KVM's
memory reclaim flows won't trigger cache maintenance, e.g. when all guest
memory is reclaimed in response to detaching from the mmu_notifier.

Note, relying on the destination VM to do cache maintenance isn't an option
as KVM doesn't require identical guest memory configurations, i.e. the
source VM may have access to memory that the destination VM does not.
Enforcing equivalent memory configurations is infeasible, as it would
require a *deep* comparison of memslots, e.g. to verify that not only are
the memslot identical, but what the memslots point at is also identical.

Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration")
Cc: stable@vger.kernel.org
Reported-by: Stefan Teodorescu <fane@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260923163721.1584779-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 147 insertions, 0 deletions

diff --git a/Documentation/gpu/zynqmp.rst b/Documentation/gpu/zynqmp.rst
new file mode 100644
index 000000000..1a6f9193d
--- /dev/null
+++ b/Documentation/gpu/zynqmp.rst
@@ -0,0 +1,147 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+===============================================
+Xilinx ZynqMP Ultrascale+ DisplayPort Subsystem
+===============================================
+
+This subsystem handles DisplayPort video and audio output on the ZynqMP. It
+supports in-memory framebuffers with the DisplayPort DMA controller
+(xilinx-dpdma), as well as "live" video and audio from the programmable logic
+(PL). This subsystem can perform several transformations, including color space
+conversion, alpha blending, and audio mixing, although not all features are
+currently supported.
+
+debugfs
+-------
+
+To support debugging and compliance testing, several test modes can be enabled
+though debugfs. The following files in /sys/kernel/debug/dri/X/DP-1/test/
+control the DisplayPort test modes:
+
+active:
+        Writing a 1 to this file will activate test mode, and writing a 0 will
+        deactivate test mode. Writing a 1 or 0 when the test mode is already
+        active/inactive will re-activate/re-deactivate test mode. When test
+        mode is inactive, changes made to other files will have no (immediate)
+        effect, although the settings will be saved for when test mode is
+        activated. When test mode is active, changes made to other files will
+        apply immediately.
+
+custom:
+        Custom test pattern value
+
+downspread:
+        Enable/disable clock downspreading (spread-spectrum clocking) by
+        writing 1/0
+
+enhanced:
+        Enable/disable enhanced framing
+
+ignore_aux_errors:
+        Ignore AUX errors when set to 1. Writes to this file take effect
+        immediately (regardless of whether test mode is active) and affect all
+        AUX transfers.
+
+ignore_hpd:
+        Ignore hotplug events (such as cable removals or monitor link
+        retraining requests) when set to 1. Writes to this file take effect
+        immediately (regardless of whether test mode is active).
+
+laneX_preemphasis:
+        Preemphasis from 0 (lowest) to 2 (highest) for lane X
+
+laneX_swing:
+        Voltage swing from 0 (lowest) to 3 (highest) for lane X
+
+lanes:
+        Number of lanes to use (1, 2, or 4)
+
+pattern:
+        Test pattern. May be one of:
+
+                video
+                        Use regular video input
+
+                symbol-error
+                        Symbol error measurement pattern
+
+                prbs7
+                        Output of the PRBS7 (x^7 + x^6 + 1) polynomial
+
+                80bit-custom
+                        A custom 80-bit pattern
+
+                cp2520
+                        HBR2 compliance eye pattern
+
+                tps1
+                        Link training symbol pattern TPS1 (/D10.2/)
+
+                tps2
+                        Link training symbol pattern TPS2
+
+                tps3
+                        Link training symbol pattern TPS3 (for HBR2)
+
+rate:
+        Rate in hertz. One of
+
+                * 5400000000 (HBR2)
+                * 2700000000 (HBR)
+                * 1620000000 (RBR)
+
+You can dump the displayport test settings with the following command::
+
+        for prop in /sys/kernel/debug/dri/1/DP-1/test/*; do
+                printf '%-17s ' ${prop##*/}
+                if [ ${prop##*/} = custom ]; then
+                        hexdump -C $prop | head -1
+                else
+                        cat $prop
+                fi
+        done
+
+The output could look something like::
+
+        active            1
+        custom            00000000  00 00 00 00 00 00 00 00  00 00                    |..........|
+        downspread        0
+        enhanced          1
+        ignore_aux_errors 1
+        ignore_hpd        1
+        lane0_preemphasis 0
+        lane0_swing       3
+        lane1_preemphasis 0
+        lane1_swing       3
+        lanes             2
+        pattern           prbs7
+        rate              1620000000
+
+The recommended test procedure is to connect the board to a monitor,
+configure test mode, activate test mode, and then disconnect the cable
+and connect it to your test equipment of choice. For example, one
+sequence of commands could be::
+
+        echo 1 > /sys/kernel/debug/dri/1/DP-1/test/enhanced
+        echo tps1 > /sys/kernel/debug/dri/1/DP-1/test/pattern
+        echo 1620000000 > /sys/kernel/debug/dri/1/DP-1/test/rate
+        echo 1 > /sys/kernel/debug/dri/1/DP-1/test/ignore_aux_errors
+        echo 1 > /sys/kernel/debug/dri/1/DP-1/test/ignore_hpd
+        echo 1 > /sys/kernel/debug/dri/1/DP-1/test/active
+
+at which point the cable could be disconnected from the monitor.
+
+Internals
+---------
+
+.. kernel-doc:: drivers/gpu/drm/xlnx/zynqmp_disp.h
+
+.. kernel-doc:: drivers/gpu/drm/xlnx/zynqmp_dpsub.h
+
+.. kernel-doc:: drivers/gpu/drm/xlnx/zynqmp_kms.h
+
+.. kernel-doc:: drivers/gpu/drm/xlnx/zynqmp_disp.c
+
+.. kernel-doc:: drivers/gpu/drm/xlnx/zynqmp_dp.c
+
+.. kernel-doc:: drivers/gpu/drm/xlnx/zynqmp_kms.c