staging: rtl8723bs: fix OOB read in rtw_action_frame_parse()grafted

rtw_action_frame_parse() takes a frame_len parameter but never
actually checks it before indexing into the frame body:

	const u8 *frame_body = frame + sizeof(struct ieee80211_hdr_3addr);
	...
	c = frame_body[0];
	...
	a = frame_body[1];

frame_body already points 24 bytes (sizeof(struct
ieee80211_hdr_3addr)) into frame, so reading frame_body[0] and
frame_body[1] requires frame_len >= 26. A management action frame
shorter than that (e.g. exactly 24 bytes, the minimum a malicious
peer can send) causes a 1-2 byte out-of-bounds read.

This is reachable from rtw_cfg80211_monitor_if_xmit_entry() and
cfg80211_rtw_mgmt_tx() in ioctl_cfg80211.c, both of which pass
attacker/user-influenced frame buffers and lengths straight through.

Add the missing length check before frame_body is dereferenced.

Fixes: 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260728125456.32359-3-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

3 files changed, 167 insertions, 0 deletions

diff --git a/Documentation/gpu/dp-mst/topology-figure-1.dot b/Documentation/gpu/dp-mst/topology-figure-1.dot
new file mode 100644
index 000000000..157e17c7e
--- /dev/null
+++ b/Documentation/gpu/dp-mst/topology-figure-1.dot
@@ -0,0 +1,52 @@
+digraph T {
+    /* Make sure our payloads are always drawn below the driver node */
+    subgraph cluster_driver {
+        fillcolor = grey;
+        style = filled;
+        driver -> {payload1, payload2} [dir=none];
+    }
+
+    /* Driver malloc references */
+    edge [style=dashed];
+    driver -> port1;
+    driver -> port2;
+    driver -> port3:e;
+    driver -> port4;
+
+    payload1:s -> port1:e;
+    payload2:s -> port3:e;
+    edge [style=""];
+
+    subgraph cluster_topology {
+        label="Topology Manager";
+        labelloc=bottom;
+
+        /* Topology references */
+        mstb1 -> {port1, port2};
+        port1 -> mstb2;
+        port2 -> mstb3 -> {port3, port4};
+        port3 -> mstb4;
+
+        /* Malloc references */
+        edge [style=dashed;dir=back];
+        mstb1 -> {port1, port2};
+        port1 -> mstb2;
+        port2 -> mstb3 -> {port3, port4};
+        port3 -> mstb4;
+    }
+
+    driver [label="DRM driver";style=filled;shape=box;fillcolor=lightblue];
+
+    payload1 [label="Payload #1";style=filled;shape=box;fillcolor=lightblue];
+    payload2 [label="Payload #2";style=filled;shape=box;fillcolor=lightblue];
+
+    mstb1 [label="MSTB #1";style=filled;fillcolor=palegreen;shape=oval];
+    mstb2 [label="MSTB #2";style=filled;fillcolor=palegreen;shape=oval];
+    mstb3 [label="MSTB #3";style=filled;fillcolor=palegreen;shape=oval];
+    mstb4 [label="MSTB #4";style=filled;fillcolor=palegreen;shape=oval];
+
+    port1 [label="Port #1";shape=oval];
+    port2 [label="Port #2";shape=oval];
+    port3 [label="Port #3";shape=oval];
+    port4 [label="Port #4";shape=oval];
+}
diff --git a/Documentation/gpu/dp-mst/topology-figure-2.dot b/Documentation/gpu/dp-mst/topology-figure-2.dot
new file mode 100644
index 000000000..4243dd173
--- /dev/null
+++ b/Documentation/gpu/dp-mst/topology-figure-2.dot
@@ -0,0 +1,56 @@
+digraph T {
+    /* Make sure our payloads are always drawn below the driver node */
+    subgraph cluster_driver {
+        fillcolor = grey;
+        style = filled;
+        driver -> {payload1, payload2} [dir=none];
+    }
+
+    /* Driver malloc references */
+    edge [style=dashed];
+    driver -> port1;
+    driver -> port2;
+    driver -> port3:e;
+    driver -> port4 [color=red];
+
+    payload1:s -> port1:e;
+    payload2:s -> port3:e;
+    edge [style=""];
+
+    subgraph cluster_topology {
+        label="Topology Manager";
+        labelloc=bottom;
+
+        /* Topology references */
+        mstb1 -> {port1, port2};
+        port1 -> mstb2;
+        edge [color=red];
+        port2 -> mstb3 -> {port3, port4};
+        port3 -> mstb4;
+        edge [color=""];
+
+        /* Malloc references */
+        edge [style=dashed;dir=back];
+        mstb1 -> {port1, port2};
+        port1 -> mstb2;
+        port2 -> mstb3 -> port3;
+        edge [color=red];
+        mstb3 -> port4;
+        port3 -> mstb4;
+    }
+
+    mstb1 [label="MSTB #1";style=filled;fillcolor=palegreen];
+    mstb2 [label="MSTB #2";style=filled;fillcolor=palegreen];
+    mstb3 [label="MSTB #3";style=filled;fillcolor=palegreen];
+    mstb4 [label="MSTB #4";style=filled;fillcolor=grey];
+
+    port1 [label="Port #1"];
+    port2 [label="Port #2"];
+    port3 [label="Port #3"];
+    port4 [label="Port #4";style=filled;fillcolor=grey];
+
+    driver [label="DRM driver";style=filled;shape=box;fillcolor=lightblue];
+
+    payload1 [label="Payload #1";style=filled;shape=box;fillcolor=lightblue];
+    payload2 [label="Payload #2";style=filled;shape=box;fillcolor=lightblue];
+}
diff --git a/Documentation/gpu/dp-mst/topology-figure-3.dot b/Documentation/gpu/dp-mst/topology-figure-3.dot
new file mode 100644
index 000000000..6cd78d067
--- /dev/null
+++ b/Documentation/gpu/dp-mst/topology-figure-3.dot
@@ -0,0 +1,59 @@
+digraph T {
+    /* Make sure our payloads are always drawn below the driver node */
+    subgraph cluster_driver {
+        fillcolor = grey;
+        style = filled;
+        edge [dir=none];
+        driver -> payload1;
+        driver -> payload2 [penwidth=3];
+        edge [dir=""];
+    }
+
+    /* Driver malloc references */
+    edge [style=dashed];
+    driver -> port1;
+    driver -> port2;
+    driver -> port3:e;
+    driver -> port4 [color=grey];
+    payload1:s -> port1:e;
+    payload2:s -> port3:e [penwidth=3];
+    edge [style=""];
+
+    subgraph cluster_topology {
+        label="Topology Manager";
+        labelloc=bottom;
+
+        /* Topology references */
+        mstb1 -> {port1, port2};
+        port1 -> mstb2;
+        edge [color=grey];
+        port2 -> mstb3 -> {port3, port4};
+        port3 -> mstb4;
+        edge [color=""];
+
+        /* Malloc references */
+        edge [style=dashed;dir=back];
+        mstb1 -> {port1, port2};
+        port1 -> mstb2;
+        port2 -> mstb3 [penwidth=3];
+        mstb3 -> port3 [penwidth=3];
+        edge [color=grey];
+        mstb3 -> port4;
+        port3 -> mstb4;
+    }
+
+    mstb1 [label="MSTB #1";style=filled;fillcolor=palegreen];
+    mstb2 [label="MSTB #2";style=filled;fillcolor=palegreen];
+    mstb3 [label="MSTB #3";style=filled;fillcolor=palegreen;penwidth=3];
+    mstb4 [label="MSTB #4";style=filled;fillcolor=grey];
+
+    port1 [label="Port #1"];
+    port2 [label="Port #2";penwidth=5];
+    port3 [label="Port #3";penwidth=3];
+    port4 [label="Port #4";style=filled;fillcolor=grey];
+
+    driver [label="DRM driver";style=filled;shape=box;fillcolor=lightblue];
+
+    payload1 [label="Payload #1";style=filled;shape=box;fillcolor=lightblue];
+    payload2 [label="Payload #2";style=filled;shape=box;fillcolor=lightblue;penwidth=3];
+}