Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

3 files changed, 167 insertions, 0 deletions

diff --git a/Documentation/gpu/dp-mst/topology-figure-1.dot b/Documentation/gpu/dp-mst/topology-figure-1.dot
new file mode 100644
index 000000000..157e17c7e
--- /dev/null
+++ b/Documentation/gpu/dp-mst/topology-figure-1.dot
@@ -0,0 +1,52 @@
+digraph T {
+    /* Make sure our payloads are always drawn below the driver node */
+    subgraph cluster_driver {
+        fillcolor = grey;
+        style = filled;
+        driver -> {payload1, payload2} [dir=none];
+    }
+
+    /* Driver malloc references */
+    edge [style=dashed];
+    driver -> port1;
+    driver -> port2;
+    driver -> port3:e;
+    driver -> port4;
+
+    payload1:s -> port1:e;
+    payload2:s -> port3:e;
+    edge [style=""];
+
+    subgraph cluster_topology {
+        label="Topology Manager";
+        labelloc=bottom;
+
+        /* Topology references */
+        mstb1 -> {port1, port2};
+        port1 -> mstb2;
+        port2 -> mstb3 -> {port3, port4};
+        port3 -> mstb4;
+
+        /* Malloc references */
+        edge [style=dashed;dir=back];
+        mstb1 -> {port1, port2};
+        port1 -> mstb2;
+        port2 -> mstb3 -> {port3, port4};
+        port3 -> mstb4;
+    }
+
+    driver [label="DRM driver";style=filled;shape=box;fillcolor=lightblue];
+
+    payload1 [label="Payload #1";style=filled;shape=box;fillcolor=lightblue];
+    payload2 [label="Payload #2";style=filled;shape=box;fillcolor=lightblue];
+
+    mstb1 [label="MSTB #1";style=filled;fillcolor=palegreen;shape=oval];
+    mstb2 [label="MSTB #2";style=filled;fillcolor=palegreen;shape=oval];
+    mstb3 [label="MSTB #3";style=filled;fillcolor=palegreen;shape=oval];
+    mstb4 [label="MSTB #4";style=filled;fillcolor=palegreen;shape=oval];
+
+    port1 [label="Port #1";shape=oval];
+    port2 [label="Port #2";shape=oval];
+    port3 [label="Port #3";shape=oval];
+    port4 [label="Port #4";shape=oval];
+}
diff --git a/Documentation/gpu/dp-mst/topology-figure-2.dot b/Documentation/gpu/dp-mst/topology-figure-2.dot
new file mode 100644
index 000000000..4243dd173
--- /dev/null
+++ b/Documentation/gpu/dp-mst/topology-figure-2.dot
@@ -0,0 +1,56 @@
+digraph T {
+    /* Make sure our payloads are always drawn below the driver node */
+    subgraph cluster_driver {
+        fillcolor = grey;
+        style = filled;
+        driver -> {payload1, payload2} [dir=none];
+    }
+
+    /* Driver malloc references */
+    edge [style=dashed];
+    driver -> port1;
+    driver -> port2;
+    driver -> port3:e;
+    driver -> port4 [color=red];
+
+    payload1:s -> port1:e;
+    payload2:s -> port3:e;
+    edge [style=""];
+
+    subgraph cluster_topology {
+        label="Topology Manager";
+        labelloc=bottom;
+
+        /* Topology references */
+        mstb1 -> {port1, port2};
+        port1 -> mstb2;
+        edge [color=red];
+        port2 -> mstb3 -> {port3, port4};
+        port3 -> mstb4;
+        edge [color=""];
+
+        /* Malloc references */
+        edge [style=dashed;dir=back];
+        mstb1 -> {port1, port2};
+        port1 -> mstb2;
+        port2 -> mstb3 -> port3;
+        edge [color=red];
+        mstb3 -> port4;
+        port3 -> mstb4;
+    }
+
+    mstb1 [label="MSTB #1";style=filled;fillcolor=palegreen];
+    mstb2 [label="MSTB #2";style=filled;fillcolor=palegreen];
+    mstb3 [label="MSTB #3";style=filled;fillcolor=palegreen];
+    mstb4 [label="MSTB #4";style=filled;fillcolor=grey];
+
+    port1 [label="Port #1"];
+    port2 [label="Port #2"];
+    port3 [label="Port #3"];
+    port4 [label="Port #4";style=filled;fillcolor=grey];
+
+    driver [label="DRM driver";style=filled;shape=box;fillcolor=lightblue];
+
+    payload1 [label="Payload #1";style=filled;shape=box;fillcolor=lightblue];
+    payload2 [label="Payload #2";style=filled;shape=box;fillcolor=lightblue];
+}
diff --git a/Documentation/gpu/dp-mst/topology-figure-3.dot b/Documentation/gpu/dp-mst/topology-figure-3.dot
new file mode 100644
index 000000000..6cd78d067
--- /dev/null
+++ b/Documentation/gpu/dp-mst/topology-figure-3.dot
@@ -0,0 +1,59 @@
+digraph T {
+    /* Make sure our payloads are always drawn below the driver node */
+    subgraph cluster_driver {
+        fillcolor = grey;
+        style = filled;
+        edge [dir=none];
+        driver -> payload1;
+        driver -> payload2 [penwidth=3];
+        edge [dir=""];
+    }
+
+    /* Driver malloc references */
+    edge [style=dashed];
+    driver -> port1;
+    driver -> port2;
+    driver -> port3:e;
+    driver -> port4 [color=grey];
+    payload1:s -> port1:e;
+    payload2:s -> port3:e [penwidth=3];
+    edge [style=""];
+
+    subgraph cluster_topology {
+        label="Topology Manager";
+        labelloc=bottom;
+
+        /* Topology references */
+        mstb1 -> {port1, port2};
+        port1 -> mstb2;
+        edge [color=grey];
+        port2 -> mstb3 -> {port3, port4};
+        port3 -> mstb4;
+        edge [color=""];
+
+        /* Malloc references */
+        edge [style=dashed;dir=back];
+        mstb1 -> {port1, port2};
+        port1 -> mstb2;
+        port2 -> mstb3 [penwidth=3];
+        mstb3 -> port3 [penwidth=3];
+        edge [color=grey];
+        mstb3 -> port4;
+        port3 -> mstb4;
+    }
+
+    mstb1 [label="MSTB #1";style=filled;fillcolor=palegreen];
+    mstb2 [label="MSTB #2";style=filled;fillcolor=palegreen];
+    mstb3 [label="MSTB #3";style=filled;fillcolor=palegreen;penwidth=3];
+    mstb4 [label="MSTB #4";style=filled;fillcolor=grey];
+
+    port1 [label="Port #1"];
+    port2 [label="Port #2";penwidth=5];
+    port3 [label="Port #3";penwidth=3];
+    port4 [label="Port #4";style=filled;fillcolor=grey];
+
+    driver [label="DRM driver";style=filled;shape=box;fillcolor=lightblue];
+
+    payload1 [label="Payload #1";style=filled;shape=box;fillcolor=lightblue];
+    payload2 [label="Payload #2";style=filled;shape=box;fillcolor=lightblue;penwidth=3];
+}