dmaengine: fix use-after-free in dma_chan_put() and dma_release_channel()grafted

When dma_device_put() drops the last reference on chan->device->ref,
dma_device_release() runs and may free the dma_device along with its
channels.

dma_chan_put() then still reads chan->device->owner via
dma_chan_to_owner() for the trailing module_put(). KASAN catches it:

	slab-use-after-free in dma_chan_put+0x3e6/0x4c0
	Read of size 8 by task insmod/6319
	Freed by task 6319:
	  kfree+0x225/0x470
	  dma_chan_put+0x395/0x4c0
	  dmaengine_put+0xf8/0x160

Cache the module owner in dma_chan_put() before the put so the trailing
module_put() does not need chan->device.

Fixes: 8ad342a86359 ("dmaengine: Add reference counting to dma_device struct")
Suggested-by: Sashiko <sashiko-bot@kernel.org>
Link: https://sashiko.dev/#/patchset/20260518-dmaengine-kref-fix-v1-1-4d6125048fb7@amd.com
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Shivank Garg <shivankg@amd.com>
Link: https://patch.msgid.link/20260822-dmaengine-kref-fix-v5-3-d4a4ee47d927@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

1 files changed, 170 insertions, 0 deletions

diff --git a/Documentation/gpu/amdgpu/thermal.rst b/Documentation/gpu/amdgpu/thermal.rst
new file mode 100644
index 000000000..1768a106a
--- /dev/null
+++ b/Documentation/gpu/amdgpu/thermal.rst
@@ -0,0 +1,170 @@
+===========================================
+ GPU Power/Thermal Controls and Monitoring
+===========================================
+
+HWMON Interfaces
+================
+
+.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c
+   :doc: hwmon
+
+GPU sysfs Power State Interfaces
+================================
+
+GPU power controls are exposed via sysfs files.
+
+power_dpm_state
+---------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c
+   :doc: power_dpm_state
+
+power_dpm_force_performance_level
+---------------------------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c
+   :doc: power_dpm_force_performance_level
+
+pp_table
+--------
+
+.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c
+   :doc: pp_table
+
+pp_od_clk_voltage
+-----------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c
+   :doc: pp_od_clk_voltage
+
+pp_dpm_*
+--------
+
+.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c
+   :doc: pp_dpm_sclk pp_dpm_mclk pp_dpm_socclk pp_dpm_fclk pp_dpm_dcefclk pp_dpm_pcie
+
+pp_power_profile_mode
+---------------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c
+   :doc: pp_power_profile_mode
+
+pm_policy
+---------------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c
+   :doc: pm_policy
+
+\*_busy_percent
+---------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c
+   :doc: gpu_busy_percent
+
+.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c
+   :doc: mem_busy_percent
+
+gpu_metrics
+-----------
+
+.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c
+   :doc: gpu_metrics
+
+fan_curve
+---------
+
+.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c
+   :doc: fan_curve
+
+acoustic_limit_rpm_threshold
+----------------------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c
+   :doc: acoustic_limit_rpm_threshold
+
+acoustic_target_rpm_threshold
+-----------------------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c
+   :doc: acoustic_target_rpm_threshold
+
+fan_target_temperature
+----------------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c
+   :doc: fan_target_temperature
+
+fan_minimum_pwm
+---------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c
+   :doc: fan_minimum_pwm
+
+fan_zero_rpm_enable
+----------------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c
+   :doc: fan_zero_rpm_enable
+
+fan_zero_rpm_stop_temperature
+-----------------------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c
+   :doc: fan_zero_rpm_stop_temperature
+
+GFXOFF
+======
+
+GFXOFF is a feature found in most recent GPUs that saves power at runtime. The
+card's RLC (RunList Controller) firmware powers off the gfx engine
+dynamically when there is no workload on gfx or compute pipes. GFXOFF is on by
+default on supported GPUs.
+
+Userspace can interact with GFXOFF through a debugfs interface (all values in
+`uint32_t`, unless otherwise noted):
+
+``amdgpu_gfxoff``
+-----------------
+
+Use it to enable/disable GFXOFF, and to check if it's current enabled/disabled::
+
+  $ xxd -l1 -p /sys/kernel/debug/dri/0/amdgpu_gfxoff
+  01
+
+- Write 0 to disable it, and 1 to enable it.
+- Read 0 means it's disabled, 1 it's enabled.
+
+If it's enabled, that means that the GPU is free to enter into GFXOFF mode as
+needed. Disabled means that it will never enter GFXOFF mode.
+
+``amdgpu_gfxoff_status``
+------------------------
+
+Read it to check current GFXOFF's status of a GPU::
+
+  $ xxd -l1 -p /sys/kernel/debug/dri/0/amdgpu_gfxoff_status
+  02
+
+- 0: GPU is in GFXOFF state, the gfx engine is powered down.
+- 1: Transition out of GFXOFF state
+- 2: Not in GFXOFF state
+- 3: Transition into GFXOFF state
+
+If GFXOFF is enabled, the value will be transitioning around [0, 3], always
+getting into 0 when possible. When it's disabled, it's always at 2. Returns
+``-EINVAL`` if it's not supported.
+
+``amdgpu_gfxoff_count``
+-----------------------
+
+Read it to get the total GFXOFF entry count at the time of query since system
+power-up. The value is an `uint64_t` type, however, due to firmware limitations,
+it can currently overflow as an `uint32_t`. *Only supported in vangogh*
+
+``amdgpu_gfxoff_residency``
+---------------------------
+
+Write 1 to amdgpu_gfxoff_residency to start logging, and 0 to stop. Read it to
+get average GFXOFF residency % multiplied by 100 during the last logging
+interval. E.g. a value of 7854 means 78.54% of the time in the last logging
+interval the GPU was in GFXOFF mode. *Only supported in vangogh*