Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 94 insertions, 0 deletions

diff --git a/Documentation/gpu/amdgpu/ptl.rst b/Documentation/gpu/amdgpu/ptl.rst
new file mode 100644
index 000000000..c7f16dea7
--- /dev/null
+++ b/Documentation/gpu/amdgpu/ptl.rst
@@ -0,0 +1,94 @@
+=======================================
+Peak Tops Limiter (PTL) sysfs Interface
+=======================================
+
+Overview
+--------
+The Peak Tops Limiter (PTL) sysfs interface enables users to control and
+configure the PTL feature for each GPU individually.  All PTL-related
+sysfs files are located under `/sys/class/drm/cardX/device/ptl/`, where
+`X` is the GPU index.  Through these files, users can enable or disable
+PTL, set preferred data formats, and query supported formats for each GPU.
+
+PTL sysfs files
+----------------
+The following files are available under `/sys/class/drm/cardX/device/ptl/`:
+
+- `ptl_enable`
+- `ptl_format`
+- `ptl_supported_formats`
+
+PTL Enable/Disable
+------------------
+File: `ptl_enable`
+Type: Read/Write (rw)
+
+Read: Returns the current PTL status as a string: `enabled` if PTL
+is active, or `disabled` if inactive.
+
+Write:
+
+- Write `1` or `enabled` to enable PTL
+- Write `0` or `disabled` to disable PTL
+
+Examples::
+
+    # Query PTL status
+    cat /sys/class/drm/card1/device/ptl/ptl_enable
+    # Output: enabled
+
+    # Enable PTL
+    sudo bash -c "echo 1 > /sys/class/drm/card1/device/ptl/ptl_enable"
+
+    # Disable PTL
+    sudo bash -c "echo 0 > /sys/class/drm/card1/device/ptl/ptl_enable"
+
+PTL Format (Preferred Data Formats)
+-----------------------------------
+File: `ptl_format`
+Type: Read/Write (rw)
+
+Read: Returns the two preferred formats, e.g. `I8,F32`.
+
+Write: Accepts two formats separated by a comma, e.g. `I8,F32`.
+
+- Both formats must be supported and different.
+- If an invalid format is provided (not supported, or both formats are the
+  same), the driver will return "write error: Invalid argument".
+
+Examples::
+
+    # Query PTL formats
+    cat /sys/class/drm/card1/device/ptl/ptl_format
+    # Output: I8,F32
+
+    # Set PTL formats
+    sudo bash -c "echo I8,F32 > /sys/class/drm/card1/device/ptl/ptl_format"
+
+Supported Formats
+-----------------
+File: `ptl_supported_formats`
+Type: Read-only (r)
+
+Read: Returns a comma-separated list of supported formats, e.g.
+`I8,F16,BF16,F32,F64`.
+
+Example::
+
+    # Check supported formats
+    cat /sys/class/drm/card1/device/ptl/ptl_supported_formats
+    # Output: I8,F16,BF16,F32,F64
+
+Behavioral Notes
+----------------
+- PTL formats can only be set when PTL is enabled.
+- If PTL is disabled, `ptl_format` returns `N/A`.
+- Only two formats can be set at a time, and they must be from the supported set and different..
+- All commands support per-GPU targeting.
+- Root permission is required to enable/disable PTL or change formats.
+- If the hardware does not support PTL, the PTL sysfs directory will not
+  be created.
+
+Implementation
+--------------
+The PTL sysfs nodes are implemented in `drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c`.