drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 33 insertions, 0 deletions

diff --git a/Documentation/gpu/amdgpu/flashing.rst b/Documentation/gpu/amdgpu/flashing.rst
new file mode 100644
index 000000000..bd745c42a
--- /dev/null
+++ b/Documentation/gpu/amdgpu/flashing.rst
@@ -0,0 +1,33 @@
+=======================
+ dGPU firmware flashing
+=======================
+
+IFWI
+----
+Flashing the dGPU integrated firmware image (IFWI) is supported by GPUs that
+use the PSP to orchestrate the update (Navi3x or newer GPUs).
+For supported GPUs, `amdgpu` will export a series of sysfs files that can be
+used for the flash process.
+
+The IFWI flash process is:
+
+1. Ensure the IFWI image is intended for the dGPU on the system.
+2. "Write" the IFWI image to the sysfs file `psp_vbflash`. This will stage the IFWI in memory.
+3. "Read" from the `psp_vbflash` sysfs file to initiate the flash process.
+4. Poll the `psp_vbflash_status` sysfs file to determine when the flash process completes.
+
+USB-C PD F/W
+------------
+On GPUs that support flashing an updated USB-C PD firmware image, the process
+is done using the `usbc_pd_fw` sysfs file.
+
+* Reading the file will provide the current firmware version.
+* Writing the name of a firmware payload stored in `/lib/firmware/amdgpu` to the sysfs file will initiate the flash process.
+
+The firmware payload stored in `/lib/firmware/amdgpu` can be named any name
+as long as it doesn't conflict with other existing binaries that are used by
+`amdgpu`.
+
+sysfs files
+-----------
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c