x86/kprobes: Fix crash when probing CS CALL instructionsgrafted

When using eBPF to probe CS CALL instructions within a function,
a crash can be triggered.

The eBPF tool probes offset 257 of the __hrtimer_run_queues()
function:

<__hrtimer_run_queues+249>:  nopl   0x0(%rax,%rax,1)
<__hrtimer_run_queues+254>:  mov    %r14,%rdi
<__hrtimer_run_queues+257>:  cs call <__x86_indirect_thunk_r12>
<__hrtimer_run_queues+263>:  mov    %eax,%r12d
<__hrtimer_run_queues+266>:  xchg   %ax,%ax
<__hrtimer_run_queues+268>:  mov    %r13,%rdi

Which triggers this crash:

  BUG: unable to handle page fault for address: 00000000000f41c9
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 0 P4D 0
  Oops: 0002 [#1] SMP NOPTI
  CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P
  RIP: 0010:__hrtimer_run_queues+0x106/0x230

Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is
at the 6th byte of the above CS CALL instruction. Since the CS CALL
instruction occupies 6 bytes, the exception occurred in the middle of that
call instruction.

The root cause is that when using eBPF tools to probe in the middle of a
function, a kprobe with INT3 is used as the underlying implementation.

During single-step emulation of the original CALL instruction,
int3_emulate_call() assumes that the probed CALL instruction is 5 bytes
long. However, the actual CS-prefixed CALL instruction occupies 6 bytes,
so it constructs an incorrect exception return address. When the CPU
returns from the kprobe handler, the next instruction to be executed is at
the address of the last byte of that CS CALL instruction. Coincidentally,
starting from that address, the CPU fetches and decodes a completely
different instruction, which ultimately triggers a kernel crash.

Fix the issue by using the actual instruction length obtained from
the instruction decoder when constructing the exception return
address, rather than relying on the hardcoded CALL_INSN_SIZE macro.

[ mingo: Refined the changelog ]

Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000

1 files changed, 75 insertions, 0 deletions

diff --git a/Documentation/firmware-guide/acpi/aml-debugger.rst b/Documentation/firmware-guide/acpi/aml-debugger.rst
new file mode 100644
index 000000000..a889d43bc
--- /dev/null
+++ b/Documentation/firmware-guide/acpi/aml-debugger.rst
@@ -0,0 +1,75 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+================
+The AML Debugger
+================
+
+:Copyright: |copy| 2016, Intel Corporation
+:Author: Lv Zheng <lv.zheng@intel.com>
+
+
+This document describes the usage of the AML debugger embedded in the Linux
+kernel.
+
+1. Build the debugger
+=====================
+
+The following kernel configuration items are required to enable the AML
+debugger interface from the Linux kernel::
+
+   CONFIG_ACPI_DEBUGGER=y
+   CONFIG_ACPI_DEBUGGER_USER=m
+
+The userspace utilities can be built from the kernel source tree using
+the following commands::
+
+   $ cd tools
+   $ make acpi
+
+The resultant userspace tool binary is then located at::
+
+   tools/power/acpi/acpidbg
+
+It can be installed to system directories by running "make install" (as a
+sufficiently privileged user).
+
+2. Start the userspace debugger interface
+=========================================
+
+After booting the kernel with the debugger built-in, the debugger can be
+started by using the following commands::
+
+   # mount -t debugfs none /sys/kernel/debug
+   # modprobe acpi_dbg
+   # tools/power/acpi/acpidbg
+
+That spawns the interactive AML debugger environment where you can execute
+debugger commands.
+
+The commands are documented in the "ACPICA Overview and Programmer Reference"
+that can be downloaded from
+
+https://acpica.org/documentation
+
+The detailed debugger commands reference is located in Chapter 12 "ACPICA
+Debugger Reference".  The "help" command can be used for a quick reference.
+
+3. Stop the userspace debugger interface
+========================================
+
+The interactive debugger interface can be closed by pressing Ctrl+C or using
+the "quit" or "exit" commands.  When finished, unload the module with::
+
+   # rmmod acpi_dbg
+
+The module unloading may fail if there is an acpidbg instance running.
+
+4. Run the debugger in a script
+===============================
+
+It may be useful to run the AML debugger in a test script. "acpidbg" supports
+this in a special "batch" mode.  For example, the following command outputs
+the entire ACPI namespace::
+
+   # acpidbg -b "namespace"