KVM: SEV: Do cache maintenance on the source VM during intra-host migrationgrafted

Manually perform cache maintenance on the source VM during intra-host
migration to ensure no stale data is left in CPU caches after the VM is
destroyed.  Because the source VM is "converted" to a non-SEV VM, KVM's
memory reclaim flows won't trigger cache maintenance, e.g. when all guest
memory is reclaimed in response to detaching from the mmu_notifier.

Note, relying on the destination VM to do cache maintenance isn't an option
as KVM doesn't require identical guest memory configurations, i.e. the
source VM may have access to memory that the destination VM does not.
Enforcing equivalent memory configurations is infeasible, as it would
require a *deep* comparison of memslots, e.g. to verify that not only are
the memslot identical, but what the memslots point at is also identical.

Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration")
Cc: stable@vger.kernel.org
Reported-by: Stefan Teodorescu <fane@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260923163721.1584779-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 75 insertions, 0 deletions

diff --git a/Documentation/filesystems/udf.rst b/Documentation/filesystems/udf.rst
new file mode 100644
index 000000000..f9489ddbb
--- /dev/null
+++ b/Documentation/filesystems/udf.rst
@@ -0,0 +1,75 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============
+UDF file system
+===============
+
+If you encounter problems with reading UDF discs using this driver,
+please report them according to MAINTAINERS file.
+
+Write support requires a block driver which supports writing.  Currently
+dvd+rw drives and media support true random sector writes, and so a udf
+filesystem on such devices can be directly mounted read/write.  CD-RW
+media however, does not support this.  Instead the media can be formatted
+for packet mode using the utility cdrwtool, then the pktcdvd driver can
+be bound to the underlying cd device to provide the required buffering
+and read-modify-write cycles to allow the filesystem random sector writes
+while providing the hardware with only full packet writes.  While not
+required for dvd+rw media, use of the pktcdvd driver often enhances
+performance due to very poor read-modify-write support supplied internally
+by drive firmware.
+
+-------------------------------------------------------------------------------
+
+The following mount options are supported:
+
+	===========	======================================
+	gid=		Set the default group.
+	umask=		Set the default umask.
+	mode=		Set the default file permissions.
+	dmode=		Set the default directory permissions.
+	uid=		Set the default user.
+	bs=		Set the block size.
+	unhide		Show otherwise hidden files.
+	undelete	Show deleted files in lists.
+	adinicb		Embed data in the inode (default)
+	noadinicb	Don't embed data in the inode
+	shortad		Use short ad's
+	longad		Use long ad's (default)
+	nostrict	Unset strict conformance
+	iocharset=	Set the NLS character set
+	===========	======================================
+
+The uid= and gid= options need a bit more explaining.  They will accept a
+decimal numeric value and all inodes on that mount will then appear as
+belonging to that uid and gid.  Mount options also accept the string "forget".
+The forget option causes all IDs to be written to disk as -1 which is a way
+of UDF standard to indicate that IDs are not supported for these files .
+
+For typical desktop use of removable media, you should set the ID to that of
+the interactively logged on user, and also specify the forget option.  This way
+the interactive user will always see the files on the disk as belonging to him.
+
+The remaining are for debugging and disaster recovery:
+
+	=====		================================
+	novrs		Skip volume sequence recognition
+	=====		================================
+
+The following expect a offset from 0.
+
+	==========	=================================================
+	session=	Set the CDROM session (default= last session)
+	anchor=		Override standard anchor location. (default= 256)
+	lastblock=	Set the last block of the filesystem/
+	==========	=================================================
+
+-------------------------------------------------------------------------------
+
+
+For the latest version and toolset see:
+	https://github.com/pali/udftools
+
+Documentation on UDF and ECMA 167 is available FREE from:
+	- http://www.osta.org/
+	- https://www.ecma-international.org/