ftrace: Synchronize the initialization of ftrace_opsgrafted

There's some internal state that ftrace_ops needs to have set, but since
it can be declared outside of the ftrace.c code, it calls
ftrace_ops_init() on the ops in every global function. The issue is that
if two tasks call it on the same ops at the same time it is possible to
have the initialization of one corrupt the initialization of the other
call.

Create a ops_mutex to use to synchronize every initialization of the
ftrace_ops. The mutex is taken within checking the ftrace_ops flag that
states it was initializied but the flag is checked again after the mutex
has been taken. Checking first outside the mutex allows it to shortcut
having to take the mutex. But then the check needs to be done again after
the mute is taken in case of races.

Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260902095501.6b59af20@gandalf.local.home
Fixes: f04f24fb7e48d ("ftrace, kprobes: Fix a deadlock on ftrace_regex_lock")
Reported-by: sashiko-bot@kernel.org
Close: https://lore.kernel.org/all/20260829025528.49A831F000E9@smtp.kernel.org/
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

1 files changed, 172 insertions, 0 deletions

diff --git a/Documentation/filesystems/ntfs.rst b/Documentation/filesystems/ntfs.rst
new file mode 100644
index 000000000..4bfa392da
--- /dev/null
+++ b/Documentation/filesystems/ntfs.rst
@@ -0,0 +1,172 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=================================
+The Linux NTFS filesystem driver
+=================================
+
+
+.. Table of contents
+
+   - Overview
+   - Utilities support
+   - Supported mount options
+
+
+Overview
+========
+
+NTFS is a Linux kernel filesystem driver that provides full read and write
+support for NTFS volumes. It is designed for high performance, modern
+kernel infrastructure (iomap, folio), and stable long-term maintenance.
+
+
+Utilities support
+=================
+
+The NTFS utilities project, called ntfsprogs-plus, provides mkfs.ntfs,
+fsck.ntfs, and other related tools (e.g., ntfsinfo, ntfsclone, etc.) for
+creating, checking, and managing NTFS volumes. These utilities can be used
+for filesystem testing with xfstests as well as for recovering corrupted
+NTFS devices.
+
+The project is available at:
+
+  https://github.com/ntfsprogs-plus/ntfsprogs-plus
+
+
+Supported mount options
+=======================
+
+The NTFS driver supports the following mount options:
+
+======================= ====================================================
+iocharset=name          Character set to use for converting between
+                        the encoding is used for user visible filename and
+                        16 bit Unicode characters.
+
+nls=name                Deprecated option.  Still supported but please use
+                        iocharset=name in the future.
+
+uid=
+gid=
+umask=                  Provide default owner, group, and access mode mask.
+                        These options work as documented in mount(8).  By
+                        default, the files/directories are owned by root
+                        and he/she has read and write permissions, as well
+                        as browse permission for directories.  No one else
+                        has any access permissions.  I.e. the mode on all
+                        files is by default rw------- and
+                        for directories rwx------, a consequence of
+                        the default fmask=0177 and dmask=0077.
+                        Using a umask of zero will grant all permissions to
+                        everyone, i.e. all files and directories will have
+                        mode rwxrwxrwx.
+
+fmask=
+dmask=                  Instead of specifying umask which applies both to
+                        files and directories, fmask applies only to files
+                        and dmask only to directories.
+
+showmeta=<BOOL>
+show_sys_files=<BOOL>   If show_sys_files is specified, show the system
+                        files in directory listings.  Otherwise the default
+                        behaviour is to hide the system files.
+                        Note that even when show_sys_files is specified,
+                        "$MFT" will not be visible due to bugs/mis-features
+                        in glibc. Further, note that irrespective of
+                        show_sys_files, all files are accessible by name,
+                        i.e. you can always do "ls -l \$UpCase" for example
+                        to specifically show the system file containing
+                        the Unicode upcase table.
+
+case_sensitive=<BOOL>   If case_sensitive is specified, treat all filenames
+                        as case sensitive and create file names in
+                        the POSIX namespace (default behavior). Note,
+                        the Linux NTFS driver will never create short
+                        filenames and will remove them on rename/delete of
+                        the corresponding long file name. Note that files
+                        remain accessible via their short file name, if it
+                        exists.
+
+nocase=<BOOL>           If nocase is specified, treat filenames
+                        case-insensitively.
+
+disable_sparse=<BOOL>   If disable_sparse is specified, creation of sparse
+                        regions, i.e. holes, inside files is disabled for
+                        the volume (for the duration of this mount only).
+                        By default, creation of sparse regions is enabled,
+                        which is consistent with the behaviour of
+                        traditional Unix filesystems.
+
+errors=opt              Specify NTFS behavior on critical errors: panic,
+                        remount the partition in read-only mode or
+                        continue without doing anything (default behavior).
+
+mft_zone_multiplier=    Set the MFT zone multiplier for the volume (this
+                        setting is not persistent across mounts and can be
+                        changed from mount to mount but cannot be changed
+                        on remount).  Values of 1 to 4 are allowed, 1 being
+                        the default.  The MFT zone multiplier determines
+                        how much space is reserved for the MFT on the
+                        volume.  If all other space is used up, then the
+                        MFT zone will be shrunk dynamically, so this has no
+                        impact on the amount of free space.  However, it
+                        can have an impact on performance by affecting
+                        fragmentation of the MFT. In general use the
+                        default.  If you have a lot of small files then use
+                        a higher value.  The values have the following
+                        meaning:
+
+                        =====   =================================
+                        Value   MFT zone size (% of volume size)
+                        =====   =================================
+                          1             12.5%
+                          2             25%
+                          3             37.5%
+                          4             50%
+                        =====   =================================
+
+                        Note this option is irrelevant for read-only mount.
+
+preallocated_size=      Set preallocated size to optimize runlist merge
+                        overhead with small chunck size.(64KB size by
+                        default)
+
+acl=<BOOL>              Enable POSIX ACL support. When specified, POSIX
+                        ACLs stored in extended attributes are enforced.
+                        Default is off. Requires kernel config
+                        NTFS_FS_POSIX_ACL enabled.
+
+sys_immutable=<BOOL>    Make NTFS system files (e.g. $MFT, $LogFile,
+                        $Bitmap, $UpCase, etc.) immutable to user initiated
+                        modifications for extra safety. Default is off.
+
+nohidden=<BOOL>         Hide files and directories marked with the Windows
+                        "hidden" attribute. By default hidden items are
+                        shown.
+
+hide_dot_files=<BOOL>   Hide names beginning with a dot ("."). By default
+                        dot files are shown. When enabled, files and
+                        directories created with a leading '.' will be
+                        hidden from directory listings.
+
+windows_names=<BOOL>    Refuse creation/rename of files with characters or
+                        reserved device names disallowed on Windows (e.g.
+                        CON, NUL, AUX, COM1, LPT1, etc.). Default is off.
+discard=<BOOL>          Issue block device discard for clusters freed on
+                        file deletion/truncation to inform underlying
+                        storage.
+
+native_symlink=raw|rel  Configure how absolute symbolic links and mount
+                        points (junctions) are handled. Under "raw"
+                        (default), the absolute target path is returned
+                        as-is without translation. Under "rel", it is
+                        rewritten as a relative path anchored at
+                        the volume root.
+
+symlink=wsl|native      Configure how symbolic links are created. Under
+                        "wsl" (default), WSL (Windows Subsystem for
+                        Linux) compatible symlinks are created. Under
+                        "native", Windows native symbolic links are
+                        created.
+======================= ====================================================