x86/kprobes: Fix crash when probing CS CALL instructionsgrafted

When using eBPF to probe CS CALL instructions within a function,
a crash can be triggered.

The eBPF tool probes offset 257 of the __hrtimer_run_queues()
function:

<__hrtimer_run_queues+249>:  nopl   0x0(%rax,%rax,1)
<__hrtimer_run_queues+254>:  mov    %r14,%rdi
<__hrtimer_run_queues+257>:  cs call <__x86_indirect_thunk_r12>
<__hrtimer_run_queues+263>:  mov    %eax,%r12d
<__hrtimer_run_queues+266>:  xchg   %ax,%ax
<__hrtimer_run_queues+268>:  mov    %r13,%rdi

Which triggers this crash:

  BUG: unable to handle page fault for address: 00000000000f41c9
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 0 P4D 0
  Oops: 0002 [#1] SMP NOPTI
  CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P
  RIP: 0010:__hrtimer_run_queues+0x106/0x230

Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is
at the 6th byte of the above CS CALL instruction. Since the CS CALL
instruction occupies 6 bytes, the exception occurred in the middle of that
call instruction.

The root cause is that when using eBPF tools to probe in the middle of a
function, a kprobe with INT3 is used as the underlying implementation.

During single-step emulation of the original CALL instruction,
int3_emulate_call() assumes that the probed CALL instruction is 5 bytes
long. However, the actual CS-prefixed CALL instruction occupies 6 bytes,
so it constructs an incorrect exception return address. When the CPU
returns from the kprobe handler, the next instruction to be executed is at
the address of the last byte of that CS CALL instruction. Coincidentally,
starting from that address, the CPU fetches and decodes a completely
different instruction, which ultimately triggers a kernel crash.

Fix the issue by using the actual instruction length obtained from
the instruction decoder when constructing the exception return
address, rather than relying on the hardcoded CALL_INSN_SIZE macro.

[ mingo: Refined the changelog ]

Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000

1 files changed, 126 insertions, 0 deletions

diff --git a/Documentation/filesystems/fuse/uapi/fuse-uapi-io-uring.rst b/Documentation/filesystems/fuse/uapi/fuse-uapi-io-uring.rst
new file mode 100644
index 000000000..8367be7ea
--- /dev/null
+++ b/Documentation/filesystems/fuse/uapi/fuse-uapi-io-uring.rst
@@ -0,0 +1,126 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================
+FUSE-over-io-uring uapi documentation
+=====================================
+
+Commands
+========
+
+``enum fuse_uring_cmd``:
+
+``FUSE_IO_URING_CMD_ADD_QUEUE``
+  Create a queue identified by ``fuse_uring_cmd_req.qid``. Queue-wide
+  options are passed in ``fuse_uring_cmd_req.flags``:
+
+  ``FUSE_URING_ZERO_COPY``
+    Enable zero-copy on this queue. Requires ``CAP_SYS_ADMIN`` and a buffer
+    pool, which is added separately via ``ADD_BUFPOOL`` before registering
+    entries (see `Zero-copy`_).
+
+``FUSE_IO_URING_CMD_ADD_BUFPOOL``
+  Register the payload buffer pool for an existing queue. The server provides
+  a single contiguous region in ``fuse_uring_cmd_req.bufpool.uaddr`` /
+  ``.len``. This command must be issued after ``ADD_QUEUE`` and before
+  registering any payload-carrying entries on that queue.
+  ``fuse_uring_cmd_req.flags`` must be 0. Submitting this command with
+  ``IORING_URING_CMD_FIXED`` marks the pool as registered, which avoids per
+  i/o pinning/unpinning and mapping overhead (see `Buffer pools`_).
+
+``FUSE_IO_URING_CMD_REGISTER``
+  Register a ring entry (a long-lived SQE that carries the request header
+  iovec). For a zero-copy queue, ``fuse_uring_cmd_req.ent_zero_copy_buf_index``
+  indicates the reserved registered buffer table slot this entry uses for
+  zero-copy (see `Zero-copy`_).
+
+``FUSE_IO_URING_CMD_COMMIT_AND_FETCH``
+  Commit the reply for a completed request and fetch the next one. The
+  request is identified by ``fuse_uring_cmd_req.commit_id`` (the value the
+  kernel reported in ``fuse_uring_ent_in_out.commit_id``).
+
+Structures
+==========
+
+``struct fuse_uring_cmd_req`` (80-byte SQE command area):
+
+============================  ==================================================
+Field                         Meaning
+============================  ==================================================
+``flags``                     Command-specific flags (see each command).
+``commit_id``                 Request id, for ``COMMIT_AND_FETCH``.
+``qid``                       Queue index.
+``bufpool.uaddr``             Pool base address, for ``ADD_BUFPOOL``.
+``bufpool.len``               Pool length in bytes, for ``ADD_BUFPOOL``.
+``bufpool.reserved``          Must be 0, for ``ADD_BUFPOOL``.
+``ent_zero_copy_buf_index``   Per-entry zero-copy slot, for ``REGISTER``.
+============================  ==================================================
+
+``struct fuse_uring_ent_in_out`` (reported by the kernel per request):
+
+============================  ==================================================
+Field                         Meaning
+============================  ==================================================
+``flags``                     ``FUSE_URING_ENT_ZERO_COPY`` if zero-copied.
+``commit_id``                 Id to echo back in ``COMMIT_AND_FETCH``.
+``payload_sz``                Total payload size in bytes (see `Zero-copy`_).
+``offset``                    Payload buffer offset within the pool.
+============================  ==================================================
+
+Buffer pools
+============
+Setup:
+
+* Issue ``ADD_QUEUE`` for the qid.
+* Issue ``ADD_BUFPOOL`` with ``bufpool.uaddr`` and ``bufpool.len`` pointing
+  at the region.
+* Register entries with ``REGISTER``.
+
+For every request that has a payload, the kernel reports where the payload
+lives in ``struct fuse_uring_ent_in_out`` (part of
+``struct fuse_uring_req_header``):
+
+``offset``
+  Byte offset, within the pool region, for this request's payload buffer.
+  The server adds this to the pool base address to locate the payload.
+
+``payload_sz``
+  Number of payload bytes for this request.
+
+To use registered buffers, the server registers the pool region with io_uring
+and submits ``ADD_BUFPOOL`` with ``IORING_URING_CMD_FIXED`` set in
+``sqe->uring_cmd_flags`` and the index of the registered bufpool in
+``sqe->buf_index``. Every SQE the server submits afterwards must follow the
+same fixed-buffer protocol, carrying ``IORING_URING_CMD_FIXED`` and that same
+``sqe->buf_index``. The same registered buffer can be reused for the server's
+backing-store I/O as well (e.g. ``IORING_OP_READ_FIXED`` /
+``IORING_OP_WRITE_FIXED``).
+
+Zero-copy
+=========
+Requirements:
+
+* The server must be privileged (``CAP_SYS_ADMIN``).
+* A zero-copy queue: ``ADD_QUEUE`` with the ``FUSE_URING_ZERO_COPY`` flag set.
+* A buffer pool: ``ADD_BUFPOOL``.
+* For each entry, ``REGISTER`` with ``ent_zero_copy_buf_index`` set to the
+  index this entry uses in the server's io_uring registered-buffer table.
+  This is where the kernel registers the request's pages for the server to
+  access (it is separate from the payload pool). On a non-zero-copy queue this
+  field must be 0.
+
+Zero-copy is selected per open file. The server sets the open-file flag in
+the ``FUSE_OPEN`` / ``FUSE_CREATE`` reply:
+
+``FOPEN_IO_URING_ZERO_COPY``
+  Reads/writes on this open file should use zero-copy.
+
+For a request that is zero-copied, the kernel sets ``FUSE_URING_ENT_ZERO_COPY``
+in ``fuse_uring_ent_in_out.flags`` and places the request's pages at the
+entry's ``ent_zero_copy_buf_index``. The server then issues
+``IORING_OP_READ_FIXED`` / ``IORING_OP_WRITE_FIXED`` against that index to
+transfer the data directly to/from the client's pages.
+
+For such a request, ``payload_sz`` includes the zero-copied page bytes
+(transferred via the registered buffer at ``ent_zero_copy_buf_index``). Any
+non-page-backed args (e.g. op headers) are still copied through the pool
+payload buffer at ``offset``.