iio: proximity: vl53l0x-i2c: claim direct mode for raw readsgrafted

vl53l0x_read_raw() starts a single-shot ranging measurement and reads
back the result. Once the triggered buffer is enabled the sensor runs in
continuous mode and its data-ready interrupt is routed to the trigger,
so a concurrent in_distance_raw read disturbs the streaming setup and
never gets its completion, returning -ETIMEDOUT.

The original submission claimed direct mode here, but it was dropped
during review because the driver had no buffer support at the time [1].
Continuous (buffered) mode was later added without restoring the
claim [2], reintroducing the conflict.

Reject direct reads while buffered capture is active by claiming direct
mode around the measurement, as the vl53l1x sibling already does.

Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1]
Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2]
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

1 files changed, 44 insertions, 0 deletions

diff --git a/Documentation/filesystems/ext4/about.rst b/Documentation/filesystems/ext4/about.rst
new file mode 100644
index 000000000..cc76b577d
--- /dev/null
+++ b/Documentation/filesystems/ext4/about.rst
@@ -0,0 +1,44 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+About this Book
+===============
+
+This document attempts to describe the on-disk format for ext4
+filesystems. The same general ideas should apply to ext2/3 filesystems
+as well, though they do not support all the features that ext4 supports,
+and the fields will be shorter.
+
+**NOTE**: This is a work in progress, based on notes that the author
+(djwong) made while picking apart a filesystem by hand. The data
+structure definitions should be current as of Linux 4.18 and
+e2fsprogs-1.44. All comments and corrections are welcome, since there is
+undoubtedly plenty of lore that might not be reflected in freshly
+created demonstration filesystems.
+
+License
+-------
+This book is licensed under the terms of the GNU Public License, v2.
+
+Terminology
+-----------
+
+ext4 divides a storage device into an array of logical blocks both to
+reduce bookkeeping overhead and to increase throughput by forcing larger
+transfer sizes. Generally, the block size will be 4KiB (the same size as
+pages on x86 and the block layer's default block size), though the
+actual size is calculated as 2 ^ (10 + ``sb.s_log_block_size``) bytes.
+Throughout this document, disk locations are given in terms of these
+logical blocks, not raw LBAs, and not 1024-byte blocks. For the sake of
+convenience, the logical block size will be referred to as
+``$block_size`` throughout the rest of the document.
+
+When referenced in ``preformatted text`` blocks, ``sb`` refers to fields
+in the super block, and ``inode`` refers to fields in an inode table
+entry.
+
+Other References
+----------------
+
+Also see https://www.nongnu.org/ext2-doc/ for quite a collection of
+information about ext2/3. Here's another old reference:
+http://wiki.osdev.org/Ext2