iio: proximity: vl53l0x-i2c: claim direct mode for raw readsgrafted

vl53l0x_read_raw() starts a single-shot ranging measurement and reads
back the result. Once the triggered buffer is enabled the sensor runs in
continuous mode and its data-ready interrupt is routed to the trigger,
so a concurrent in_distance_raw read disturbs the streaming setup and
never gets its completion, returning -ETIMEDOUT.

The original submission claimed direct mode here, but it was dropped
during review because the driver had no buffer support at the time [1].
Continuous (buffered) mode was later added without restoring the
claim [2], reintroducing the conflict.

Reject direct reads while buffered capture is active by claiming direct
mode around the measurement, as the vl53l1x sibling already does.

Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1]
Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2]
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

1 files changed, 86 insertions, 0 deletions

diff --git a/Documentation/filesystems/ecryptfs.rst b/Documentation/filesystems/ecryptfs.rst
new file mode 100644
index 000000000..1f2edef4c
--- /dev/null
+++ b/Documentation/filesystems/ecryptfs.rst
@@ -0,0 +1,86 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================================
+eCryptfs: A stacked cryptographic filesystem for Linux
+======================================================
+
+eCryptfs is free software. Please see the file COPYING for details.
+For documentation, please see the files in the doc/ subdirectory.  For
+building and installation instructions please see the INSTALL file.
+
+:Maintainer: Phillip Hellewell
+:Lead developer: Michael A. Halcrow <mhalcrow@us.ibm.com>
+:Developers: Michael C. Thompson
+             Kent Yoder
+:Web Site: http://ecryptfs.sf.net
+
+This software is currently undergoing development. Make sure to
+maintain a backup copy of any data you write into eCryptfs.
+
+eCryptfs requires the userspace tools downloadable from the
+SourceForge site:
+
+http://sourceforge.net/projects/ecryptfs/
+
+Userspace requirements include:
+
+- David Howells' userspace keyring headers and libraries (version
+  1.0 or higher), obtainable from
+  http://people.redhat.com/~dhowells/keyutils/
+- Libgcrypt
+
+
+.. note::
+
+   In the beta/experimental releases of eCryptfs, when you upgrade
+   eCryptfs, you should copy the files to an unencrypted location and
+   then copy the files back into the new eCryptfs mount to migrate the
+   files.
+
+
+Mount-wide Passphrase
+=====================
+
+Create a new directory into which eCryptfs will write its encrypted
+files (i.e., /root/crypt).  Then, create the mount point directory
+(i.e., /mnt/crypt).  Now it's time to mount eCryptfs::
+
+    mount -t ecryptfs /root/crypt /mnt/crypt
+
+You should be prompted for a passphrase and a salt (the salt may be
+blank).
+
+Try writing a new file::
+
+    echo "Hello, World" > /mnt/crypt/hello.txt
+
+The operation will complete.  Notice that there is a new file in
+/root/crypt that is at least 12288 bytes in size (depending on your
+host page size).  This is the encrypted underlying file for what you
+just wrote.  To test reading, from start to finish, you need to clear
+the user session keyring:
+
+keyctl clear @u
+
+Then umount /mnt/crypt and mount again per the instructions given
+above.
+
+::
+
+    cat /mnt/crypt/hello.txt
+
+
+Notes
+=====
+
+eCryptfs version 0.1 should only be mounted on (1) empty directories
+or (2) directories containing files only created by eCryptfs. If you
+mount a directory that has pre-existing files not created by eCryptfs,
+then behavior is undefined. Do not run eCryptfs in higher verbosity
+levels unless you are doing so for the sole purpose of debugging or
+development, since secret values will be written out to the system log
+in that case.
+
+
+Mike Halcrow
+mhalcrow@us.ibm.com