drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

2 files changed, 99 insertions, 0 deletions

diff --git a/Documentation/features/sched/membarrier-sync-core/arch-support.txt b/Documentation/features/sched/membarrier-sync-core/arch-support.txt
new file mode 100644
index 000000000..7425d2b99
--- /dev/null
+++ b/Documentation/features/sched/membarrier-sync-core/arch-support.txt
@@ -0,0 +1,69 @@
+#
+# Feature name:          membarrier-sync-core
+#         Kconfig:       ARCH_HAS_MEMBARRIER_SYNC_CORE
+#         description:   arch supports core serializing membarrier
+#
+# Architecture requirements
+#
+# * arm/arm64/powerpc/s390
+#
+# Rely on implicit context synchronization as a result of exception return
+# when returning from IPI handler, and when returning to user-space.
+#
+# * riscv
+#
+# riscv uses xRET as return from interrupt and to return to user-space.
+#
+# Given that xRET is not core serializing, we rely on FENCE.I for providing
+# core serialization:
+#
+#  - by calling sync_core_before_usermode() on return from interrupt (cf.
+#    ipi_sync_core()),
+#
+#  - via switch_mm() and sync_core_before_usermode() (respectively, for
+#    uthread->uthread and kthread->uthread transitions) before returning
+#    to user-space.
+#
+#  The serialization in switch_mm() is activated by prepare_sync_core_cmd().
+#
+# * x86
+#
+# x86-32 uses IRET as return from interrupt, which takes care of the IPI.
+# However, it uses both IRET and SYSEXIT to go back to user-space. The IRET
+# instruction is core serializing, but not SYSEXIT.
+#
+# x86-64 uses IRET as return from interrupt, which takes care of the IPI.
+# However, it can return to user-space through either SYSRETL (compat code),
+# SYSRETQ, or IRET.
+#
+# Given that neither SYSRET{L,Q}, nor SYSEXIT, are core serializing, we rely
+# instead on write_cr3() performed by switch_mm() to provide core serialization
+# after changing the current mm, and deal with the special case of kthread ->
+# uthread (temporarily keeping current mm into active_mm) by issuing a
+# sync_core_before_usermode() in that specific case.
+#
+    -----------------------
+    |         arch |status|
+    -----------------------
+    |       alpha: | TODO |
+    |         arc: | TODO |
+    |         arm: |  ok  |
+    |       arm64: |  ok  |
+    |        csky: | TODO |
+    |     hexagon: | TODO |
+    |   loongarch: | TODO |
+    |        m68k: | TODO |
+    |  microblaze: | TODO |
+    |        mips: | TODO |
+    |       nios2: | TODO |
+    |    openrisc: | TODO |
+    |      parisc: | TODO |
+    |     powerpc: |  ok  |
+    |       riscv: |  ok  |
+    |        s390: |  ok  |
+    |          sh: | TODO |
+    |       sparc: | TODO |
+    |          um: | TODO |
+    |         x86: |  ok  |
+    |      xtensa: | TODO |
+    -----------------------
diff --git a/Documentation/features/sched/numa-balancing/arch-support.txt b/Documentation/features/sched/numa-balancing/arch-support.txt
new file mode 100644
index 000000000..984601c7c
--- /dev/null
+++ b/Documentation/features/sched/numa-balancing/arch-support.txt
@@ -0,0 +1,30 @@
+#
+# Feature name:          numa-balancing
+#         Kconfig:       ARCH_SUPPORTS_NUMA_BALANCING
+#         description:   arch supports NUMA balancing
+#
+    -----------------------
+    |         arch |status|
+    -----------------------
+    |       alpha: | TODO |
+    |         arc: |  ..  |
+    |         arm: |  ..  |
+    |       arm64: |  ok  |
+    |        csky: |  ..  |
+    |     hexagon: |  ..  |
+    |   loongarch: |  ok  |
+    |        m68k: |  ..  |
+    |  microblaze: |  ..  |
+    |        mips: | TODO |
+    |       nios2: |  ..  |
+    |    openrisc: |  ..  |
+    |      parisc: |  ..  |
+    |     powerpc: |  ok  |
+    |       riscv: |  ok  |
+    |        s390: |  ok  |
+    |          sh: |  ..  |
+    |       sparc: | TODO |
+    |          um: |  ..  |
+    |         x86: |  ok  |
+    |      xtensa: |  ..  |
+    -----------------------