ftrace: Synchronize the initialization of ftrace_opsgrafted

There's some internal state that ftrace_ops needs to have set, but since
it can be declared outside of the ftrace.c code, it calls
ftrace_ops_init() on the ops in every global function. The issue is that
if two tasks call it on the same ops at the same time it is possible to
have the initialization of one corrupt the initialization of the other
call.

Create a ops_mutex to use to synchronize every initialization of the
ftrace_ops. The mutex is taken within checking the ftrace_ops flag that
states it was initializied but the flag is checked again after the mutex
has been taken. Checking first outside the mutex allows it to shortcut
having to take the mutex. But then the check needs to be done again after
the mute is taken in case of races.

Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260902095501.6b59af20@gandalf.local.home
Fixes: f04f24fb7e48d ("ftrace, kprobes: Fix a deadlock on ftrace_regex_lock")
Reported-by: sashiko-bot@kernel.org
Close: https://lore.kernel.org/all/20260829025528.49A831F000E9@smtp.kernel.org/
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

1 files changed, 297 insertions, 0 deletions

diff --git a/Documentation/fb/viafb.rst b/Documentation/fb/viafb.rst
new file mode 100644
index 000000000..8eb7a3bb0
--- /dev/null
+++ b/Documentation/fb/viafb.rst
@@ -0,0 +1,297 @@
+=======================================================
+VIA Integration Graphic Chip Console Framebuffer Driver
+=======================================================
+
+Platform
+--------
+    The console framebuffer driver is for graphics chips of
+    VIA UniChrome Family
+    (CLE266, PM800 / CN400 / CN300,
+    P4M800CE / P4M800Pro / CN700 / VN800,
+    CX700 / VX700, K8M890, P4M890,
+    CN896 / P4M900, VX800, VX855)
+
+Driver features
+---------------
+    Device: CRT, LCD, DVI
+
+    Support viafb_mode::
+
+	CRT:
+	    640x480(60, 75, 85, 100, 120 Hz), 720x480(60 Hz),
+	    720x576(60 Hz), 800x600(60, 75, 85, 100, 120 Hz),
+	    848x480(60 Hz), 856x480(60 Hz), 1024x512(60 Hz),
+	    1024x768(60, 75, 85, 100 Hz), 1152x864(75 Hz),
+	    1280x768(60 Hz), 1280x960(60 Hz), 1280x1024(60, 75, 85 Hz),
+	    1440x1050(60 Hz), 1600x1200(60, 75 Hz), 1280x720(60 Hz),
+	    1920x1080(60 Hz), 1400x1050(60 Hz), 800x480(60 Hz)
+
+    color depth: 8 bpp, 16 bpp, 32 bpp supports.
+
+    Support 2D hardware accelerator.
+
+Using the viafb module
+----------------------
+    Start viafb with default settings::
+
+	#modprobe viafb
+
+    Start viafb with user options::
+
+	#modprobe viafb viafb_mode=800x600 viafb_bpp=16 viafb_refresh=60
+		  viafb_active_dev=CRT+DVI viafb_dvi_port=DVP1
+		  viafb_mode1=1024x768 viafb_bpp=16 viafb_refresh1=60
+		  viafb_SAMM_ON=1
+
+    viafb_mode:
+	- 640x480 (default)
+	- 720x480
+	- 800x600
+	- 1024x768
+
+    viafb_bpp:
+	- 8, 16, 32 (default:32)
+
+    viafb_refresh:
+	- 60, 75, 85, 100, 120 (default:60)
+
+    viafb_lcd_dsp_method:
+	- 0 : expansion (default)
+	- 1 : centering
+
+    viafb_lcd_mode:
+	0 : LCD panel with LSB data format input (default)
+	1 : LCD panel with MSB data format input
+
+    viafb_lcd_panel_id:
+	- 0 : Resolution: 640x480, Channel: single, Dithering: Enable
+	- 1 : Resolution: 800x600, Channel: single, Dithering: Enable
+	- 2 : Resolution: 1024x768, Channel: single, Dithering: Enable (default)
+	- 3 : Resolution: 1280x768, Channel: single, Dithering: Enable
+	- 4 : Resolution: 1280x1024, Channel: dual, Dithering: Enable
+	- 5 : Resolution: 1400x1050, Channel: dual, Dithering: Enable
+	- 6 : Resolution: 1600x1200, Channel: dual, Dithering: Enable
+
+	- 8 : Resolution: 800x480, Channel: single, Dithering: Enable
+	- 9 : Resolution: 1024x768, Channel: dual, Dithering: Enable
+	- 10: Resolution: 1024x768, Channel: single, Dithering: Disable
+	- 11: Resolution: 1024x768, Channel: dual, Dithering: Disable
+	- 12: Resolution: 1280x768, Channel: single, Dithering: Disable
+	- 13: Resolution: 1280x1024, Channel: dual, Dithering: Disable
+	- 14: Resolution: 1400x1050, Channel: dual, Dithering: Disable
+	- 15: Resolution: 1600x1200, Channel: dual, Dithering: Disable
+	- 16: Resolution: 1366x768, Channel: single, Dithering: Disable
+	- 17: Resolution: 1024x600, Channel: single, Dithering: Enable
+	- 18: Resolution: 1280x768, Channel: dual, Dithering: Enable
+	- 19: Resolution: 1280x800, Channel: single, Dithering: Enable
+
+    viafb_accel:
+	- 0 : No 2D Hardware Acceleration
+	- 1 : 2D Hardware Acceleration (default)
+
+    viafb_SAMM_ON:
+	- 0 : viafb_SAMM_ON disable (default)
+	- 1 : viafb_SAMM_ON enable
+
+    viafb_mode1: (secondary display device)
+	- 640x480 (default)
+	- 720x480
+	- 800x600
+	- 1024x768
+
+    viafb_bpp1: (secondary display device)
+	- 8, 16, 32 (default:32)
+
+    viafb_refresh1: (secondary display device)
+	- 60, 75, 85, 100, 120 (default:60)
+
+    viafb_active_dev:
+	This option is used to specify active devices.(CRT, DVI, CRT+LCD...)
+	DVI stands for DVI or HDMI, E.g., If you want to enable HDMI,
+	set viafb_active_dev=DVI. In SAMM case, the previous of
+	viafb_active_dev is primary device, and the following is
+	secondary device.
+
+	For example:
+
+	To enable one device, such as DVI only, we can use::
+
+	    modprobe viafb viafb_active_dev=DVI
+
+	To enable two devices, such as CRT+DVI::
+
+	    modprobe viafb viafb_active_dev=CRT+DVI;
+
+	For DuoView case, we can use::
+
+	    modprobe viafb viafb_active_dev=CRT+DVI
+
+	OR::
+
+	    modprobe viafb viafb_active_dev=DVI+CRT...
+
+	For SAMM case:
+
+	If CRT is primary and DVI is secondary, we should use::
+
+	    modprobe viafb viafb_active_dev=CRT+DVI viafb_SAMM_ON=1...
+
+	If DVI is primary and CRT is secondary, we should use::
+
+	    modprobe viafb viafb_active_dev=DVI+CRT viafb_SAMM_ON=1...
+
+    viafb_display_hardware_layout:
+	This option is used to specify display hardware layout for CX700 chip.
+
+	- 1 : LCD only
+	- 2 : DVI only
+	- 3 : LCD+DVI (default)
+	- 4 : LCD1+LCD2 (internal + internal)
+	- 16: LCD1+ExternalLCD2 (internal + external)
+
+    viafb_second_size:
+	This option is used to set second device memory size(MB) in SAMM case.
+	The minimal size is 16.
+
+    viafb_platform_epia_dvi:
+	This option is used to enable DVI on EPIA - M
+
+	- 0 : No DVI on EPIA - M (default)
+	- 1 : DVI on EPIA - M
+
+    viafb_bus_width:
+	When using 24 - Bit Bus Width Digital Interface,
+	this option should be set.
+
+	- 12: 12-Bit LVDS or 12-Bit TMDS (default)
+	- 24: 24-Bit LVDS or 24-Bit TMDS
+
+    viafb_device_lcd_dualedge:
+	When using Dual Edge Panel, this option should be set.
+
+	- 0 : No Dual Edge Panel (default)
+	- 1 : Dual Edge Panel
+
+    viafb_lcd_port:
+	This option is used to specify LCD output port,
+	available values are "DVP0" "DVP1" "DFP_HIGHLOW" "DFP_HIGH" "DFP_LOW".
+
+	for external LCD + external DVI on CX700(External LCD is on DVP0),
+	we should use::
+
+	    modprobe viafb viafb_lcd_port=DVP0...
+
+Notes:
+    1. CRT may not display properly for DuoView CRT & DVI display at
+       the "640x480" PAL mode with DVI overscan enabled.
+    2. SAMM stands for single adapter multi monitors. It is different from
+       multi-head since SAMM support multi monitor at driver layers, thus fbcon
+       layer doesn't even know about it; SAMM's second screen doesn't have a
+       device node file, thus a user mode application can't access it directly.
+       When SAMM is enabled, viafb_mode and viafb_mode1, viafb_bpp and
+       viafb_bpp1, viafb_refresh and viafb_refresh1 can be different.
+    3. When console is depending on viafbinfo1, dynamically change resolution
+       and bpp, need to call VIAFB specified ioctl interface VIAFB_SET_DEVICE
+       instead of calling common ioctl function FBIOPUT_VSCREENINFO since
+       viafb doesn't support multi-head well, or it will cause screen crush.
+
+
+Configure viafb with "fbset" tool
+---------------------------------
+
+    "fbset" is an inbox utility of Linux.
+
+    1. Inquire current viafb information, type::
+
+	   # fbset -i
+
+    2. Set various resolutions and viafb_refresh rates::
+
+	   # fbset <resolution-vertical_sync>
+
+       example::
+
+	   # fbset "1024x768-75"
+
+       or::
+
+	   # fbset -g 1024 768 1024 768 32
+
+       Check the file "/etc/fb.modes" to find display modes available.
+
+    3. Set the color depth::
+
+	   # fbset -depth <value>
+
+       example::
+
+	   # fbset -depth 16
+
+
+Configure viafb via /proc
+-------------------------
+    The following files exist in /proc/viafb
+
+    supported_output_devices
+	This read-only file contains a full ',' separated list containing all
+	output devices that could be available on your platform. It is likely
+	that not all of those have a connector on your hardware but it should
+	provide a good starting point to figure out which of those names match
+	a real connector.
+
+	Example::
+
+		# cat /proc/viafb/supported_output_devices
+
+    iga1/output_devices, iga2/output_devices
+	These two files are readable and writable. iga1 and iga2 are the two
+	independent units that produce the screen image. Those images can be
+	forwarded to one or more output devices. Reading those files is a way
+	to query which output devices are currently used by an iga.
+
+	Example::
+
+		# cat /proc/viafb/iga1/output_devices
+
+	If there are no output devices printed the output of this iga is lost.
+	This can happen for example if only one (the other) iga is used.
+	Writing to these files allows adjusting the output devices during
+	runtime. One can add new devices, remove existing ones or switch
+	between igas. Essentially you can write a ',' separated list of device
+	names (or a single one) in the same format as the output to those
+	files. You can add a '+' or '-' as a prefix allowing simple addition
+	and removal of devices. So a prefix '+' adds the devices from your list
+	to the already existing ones, '-' removes the listed devices from the
+	existing ones and if no prefix is given it replaces all existing ones
+	with the listed ones. If you remove devices they are expected to turn
+	off. If you add devices that are already part of the other iga they are
+	removed there and added to the new one.
+
+	Examples:
+
+	Add CRT as output device to iga1::
+
+		# echo +CRT > /proc/viafb/iga1/output_devices
+
+	Remove (turn off) DVP1 and LVDS1 as output devices of iga2::
+
+		# echo -DVP1,LVDS1 > /proc/viafb/iga2/output_devices
+
+	Replace all iga1 output devices by CRT::
+
+		# echo CRT > /proc/viafb/iga1/output_devices
+
+
+Bootup with viafb
+-----------------
+
+Add the following line to your grub.conf::
+
+    append = "video=viafb:viafb_mode=1024x768,viafb_bpp=32,viafb_refresh=85"
+
+
+VIA Framebuffer modes
+=====================
+
+.. include:: viafb.modes
+   :literal: