KVM: SEV: Do cache maintenance on the source VM during intra-host migrationgrafted

Manually perform cache maintenance on the source VM during intra-host
migration to ensure no stale data is left in CPU caches after the VM is
destroyed.  Because the source VM is "converted" to a non-SEV VM, KVM's
memory reclaim flows won't trigger cache maintenance, e.g. when all guest
memory is reclaimed in response to detaching from the mmu_notifier.

Note, relying on the destination VM to do cache maintenance isn't an option
as KVM doesn't require identical guest memory configurations, i.e. the
source VM may have access to memory that the destination VM does not.
Enforcing equivalent memory configurations is infeasible, as it would
require a *deep* comparison of memslots, e.g. to verify that not only are
the memslot identical, but what the memslots point at is also identical.

Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration")
Cc: stable@vger.kernel.org
Reported-by: Stefan Teodorescu <fane@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260923163721.1584779-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 71 insertions, 0 deletions

diff --git a/Documentation/fb/efifb.rst b/Documentation/fb/efifb.rst
new file mode 100644
index 000000000..3d4aab406
--- /dev/null
+++ b/Documentation/fb/efifb.rst
@@ -0,0 +1,71 @@
+===================================
+efifb - Generic EFI platform driver
+===================================
+
+This is a generic EFI platform driver for systems with UEFI firmware. The
+system must be booted via the EFI stub for this to be usable. efifb supports
+both firmware with Graphics Output Protocol (GOP) displays as well as older
+systems with only Universal Graphics Adapter (UGA) displays.
+
+Supported Hardware
+==================
+
+- iMac 17"/20"
+- Macbook
+- Macbook Pro 15"/17"
+- MacMini
+- ARM/ARM64/X86 systems with UEFI firmware
+
+How to use it?
+==============
+
+For UGA displays, efifb does not have any kind of autodetection of your
+machine.
+
+You have to add the following kernel parameters in your elilo.conf::
+
+	Macbook :
+		video=efifb:macbook
+	MacMini :
+		video=efifb:mini
+	Macbook Pro 15", iMac 17" :
+		video=efifb:i17
+	Macbook Pro 17", iMac 20" :
+		video=efifb:i20
+
+For GOP displays, efifb can autodetect the display's resolution and framebuffer
+address, so these should work out of the box without any special parameters.
+
+Accepted options:
+
+======= ===========================================================
+nowc	Don't map the framebuffer write combined. This can be used
+	to workaround side-effects and slowdowns on other CPU cores
+	when large amounts of console data are written.
+======= ===========================================================
+
+Options for GOP displays:
+
+mode=n
+        The EFI stub will set the mode of the display to mode number n if
+        possible.
+
+<xres>x<yres>[-(rgb|bgr|<bpp>)]
+        The EFI stub will search for a display mode that matches the specified
+        horizontal and vertical resolution, and optionally bit depth, and set
+        the mode of the display to it if one is found. The bit depth can either
+        "rgb" or "bgr" to match specifically those pixel formats, or a number
+        for a mode with matching bits per pixel.
+
+auto
+        The EFI stub will choose the mode with the highest resolution (product
+        of horizontal and vertical resolution). If there are multiple modes
+        with the highest resolution, it will choose one with the highest color
+        depth.
+
+list
+        The EFI stub will list out all the display modes that are available. A
+        specific mode can then be chosen using one of the above options for the
+        next boot.
+
+Edgar Hucek <gimli@dark-green.com>