openrisc: fix arbitrary kernel memory access via or1k_atomic syscallgrafted

sys_or1k_atomic() (syscall 244 in the "or1k" ABI) takes two user
pointers, v1 and v2, and swaps the words they point to in hand-written
assembly.

    l.lwz   r29,0(r4)
    l.lwz   r27,0(r5)
    l.sw    0(r4),r27
    l.sw    0(r5),r29

The pointers are not checked with access_ok(). The four memory
accesses also have no exception table entries.

A caller passes a kernel address as either pointer, and the syscall
reads from and writes to it directly.

This gives an unprivileged process a kernel read/write primitive. It
overwrites kernel data such as the sys_call_table, gaining code
execution in kernel context.

Check both pointers before entering the critical section. Add fixups
for the four memory accesses so faults on valid but unmapped user
addresses return -EFAULT.

[shorne@gmail.com: fix comment style]
Fixes: 9d02a4283e9c ("OpenRISC: Boot code")
Cc: stable@vger.kernel.org
Signed-off-by: Ali Ahmet Memis <ali@iusegentoo.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>

2 files changed, 49 insertions, 0 deletions

diff --git a/Documentation/driver-api/xilinx/eemi.rst b/Documentation/driver-api/xilinx/eemi.rst
new file mode 100644
index 000000000..c1bc47b90
--- /dev/null
+++ b/Documentation/driver-api/xilinx/eemi.rst
@@ -0,0 +1,40 @@
+====================================
+Xilinx Zynq MPSoC EEMI Documentation
+====================================
+
+Xilinx Zynq MPSoC Firmware Interface
+-------------------------------------
+The zynqmp-firmware node describes the interface to platform firmware.
+ZynqMP has an interface to communicate with secure firmware. Firmware
+driver provides an interface to firmware APIs. Interface APIs can be
+used by any driver to communicate with PMC(Platform Management Controller).
+
+Embedded Energy Management Interface (EEMI)
+----------------------------------------------
+The embedded energy management interface is used to allow software
+components running across different processing clusters on a chip or
+device to communicate with a power management controller (PMC) on a
+device to issue or respond to power management requests.
+
+Any driver who wants to communicate with PMC using EEMI APIs use the
+functions provided for each function.
+
+IOCTL
+------
+IOCTL API is for device control and configuration. It is not a system
+IOCTL but it is an EEMI API. This API can be used by master to control
+any device specific configuration. IOCTL definitions can be platform
+specific. This API also manage shared device configuration.
+
+The following IOCTL IDs are valid for device control:
+- IOCTL_SET_PLL_FRAC_MODE	8
+- IOCTL_GET_PLL_FRAC_MODE	9
+- IOCTL_SET_PLL_FRAC_DATA	10
+- IOCTL_GET_PLL_FRAC_DATA	11
+
+Refer EEMI API guide [0] for IOCTL specific parameters and other EEMI APIs.
+
+References
+----------
+[0] Embedded Energy Management Interface (EEMI) API guide:
+    https://www.xilinx.com/support/documentation/user_guides/ug1200-eemi-api.pdf
diff --git a/Documentation/driver-api/xilinx/index.rst b/Documentation/driver-api/xilinx/index.rst
new file mode 100644
index 000000000..c95bda55d
--- /dev/null
+++ b/Documentation/driver-api/xilinx/index.rst
@@ -0,0 +1,9 @@
+
+===========
+Xilinx FPGA
+===========
+
+.. toctree::
+    :maxdepth: 1
+
+    eemi