diff options
| author | Fuad Tabba <fuad.tabba@linux.dev> | 2026-09-22 19:14:30 +0100 |
|---|---|---|
| committer | Will Deacon <will@kernel.org> | 2026-09-23 12:34:30 +0000 |
| commit | 2bc6b218717b9d08f466f88209251d54bc09b207 (patch) | |
| tree | cb91c941eccb15f94cbec4e96aa3a9c8736b5d66 /Documentation/driver-api/xilinx | |
| download | linux-stable-2bc6b218717b9d08f466f88209251d54bc09b207.tar.gz linux-stable-2bc6b218717b9d08f466f88209251d54bc09b207.zip | |
arm64/boot: Disable trapping of PMZR_EL0 writes to EL2grafted
__init_el2_fgt2() writes one mask to both HDFGRTR2_EL2 and HDFGWTR2_EL2.
PMZR_EL0 is write-only, so its trap bit, nPMZR_EL0, exists only in
HDFGWTR2_EL2 and is therefore never set: a PMZR_EL0 write from the host
traps to EL2, where the nVHE hypervisor has no handler and BUG()s. The
kernel never writes PMZR_EL0, but kernel.perf_user_access=1 has the PMU
driver set PMUSERENR_EL0.UEN for a task with a user-read event, so a
write from EL0 reaches the trap and takes the host down without a panic
message.
Accumulate the HDFGWTR2_EL2 bits separately, as __init_el2_fgt() already
does for HDFGWTR_EL2, and set nPMZR_EL0 with the other FEAT_PMUv3p9
bits.
Fixes: 858c7bfcb35e1 ("arm64/boot: Enable EL2 requirements for FEAT_PMUv3p9")
Cc: stable@vger.kernel.org
Signed-off-by: Fuad Tabba <fuad.tabba@linux.dev>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Diffstat (limited to 'Documentation/driver-api/xilinx')
| -rw-r--r-- | Documentation/driver-api/xilinx/eemi.rst | 40 | ||||
| -rw-r--r-- | Documentation/driver-api/xilinx/index.rst | 9 |
2 files changed, 49 insertions, 0 deletions
diff --git a/Documentation/driver-api/xilinx/eemi.rst b/Documentation/driver-api/xilinx/eemi.rst new file mode 100644 index 000000000..c1bc47b90 --- /dev/null +++ b/Documentation/driver-api/xilinx/eemi.rst @@ -0,0 +1,40 @@ +==================================== +Xilinx Zynq MPSoC EEMI Documentation +==================================== + +Xilinx Zynq MPSoC Firmware Interface +------------------------------------- +The zynqmp-firmware node describes the interface to platform firmware. +ZynqMP has an interface to communicate with secure firmware. Firmware +driver provides an interface to firmware APIs. Interface APIs can be +used by any driver to communicate with PMC(Platform Management Controller). + +Embedded Energy Management Interface (EEMI) +---------------------------------------------- +The embedded energy management interface is used to allow software +components running across different processing clusters on a chip or +device to communicate with a power management controller (PMC) on a +device to issue or respond to power management requests. + +Any driver who wants to communicate with PMC using EEMI APIs use the +functions provided for each function. + +IOCTL +------ +IOCTL API is for device control and configuration. It is not a system +IOCTL but it is an EEMI API. This API can be used by master to control +any device specific configuration. IOCTL definitions can be platform +specific. This API also manage shared device configuration. + +The following IOCTL IDs are valid for device control: +- IOCTL_SET_PLL_FRAC_MODE 8 +- IOCTL_GET_PLL_FRAC_MODE 9 +- IOCTL_SET_PLL_FRAC_DATA 10 +- IOCTL_GET_PLL_FRAC_DATA 11 + +Refer EEMI API guide [0] for IOCTL specific parameters and other EEMI APIs. + +References +---------- +[0] Embedded Energy Management Interface (EEMI) API guide: + https://www.xilinx.com/support/documentation/user_guides/ug1200-eemi-api.pdf diff --git a/Documentation/driver-api/xilinx/index.rst b/Documentation/driver-api/xilinx/index.rst new file mode 100644 index 000000000..c95bda55d --- /dev/null +++ b/Documentation/driver-api/xilinx/index.rst @@ -0,0 +1,9 @@ + +=========== +Xilinx FPGA +=========== + +.. toctree:: + :maxdepth: 1 + + eemi |