Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 145 insertions, 0 deletions

diff --git a/Documentation/driver-api/virtio/virtio.rst b/Documentation/driver-api/virtio/virtio.rst
new file mode 100644
index 000000000..7947b4ca6
--- /dev/null
+++ b/Documentation/driver-api/virtio/virtio.rst
@@ -0,0 +1,145 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _virtio:
+
+===============
+Virtio on Linux
+===============
+
+Introduction
+============
+
+Virtio is an open standard that defines a protocol for communication
+between drivers and devices of different types, see Chapter 5 ("Device
+Types") of the virtio spec (`[1]`_). Originally developed as a standard
+for paravirtualized devices implemented by a hypervisor, it can be used
+to interface any compliant device (real or emulated) with a driver.
+
+For illustrative purposes, this document will focus on the common case
+of a Linux kernel running in a virtual machine and using paravirtualized
+devices provided by the hypervisor, which exposes them as virtio devices
+via standard mechanisms such as PCI.
+
+
+Device - Driver communication: virtqueues
+=========================================
+
+Although the virtio devices are really an abstraction layer in the
+hypervisor, they're exposed to the guest as if they are physical devices
+using a specific transport method -- PCI, MMIO or CCW -- that is
+orthogonal to the device itself. The virtio spec defines these transport
+methods in detail, including device discovery, capabilities and
+interrupt handling.
+
+The communication between the driver in the guest OS and the device in
+the hypervisor is done through shared memory (that's what makes virtio
+devices so efficient) using specialized data structures called
+virtqueues, which are actually ring buffers [#f1]_ of buffer descriptors
+similar to the ones used in a network device:
+
+.. kernel-doc:: include/uapi/linux/virtio_ring.h
+    :identifiers: struct vring_desc
+
+All the buffers the descriptors point to are allocated by the guest and
+used by the host either for reading or for writing but not for both.
+
+Refer to Chapter 2.5 ("Virtqueues") of the virtio spec (`[1]`_) for the
+reference definitions of virtqueues and "Virtqueues and virtio ring: How
+the data travels" blog post (`[2]`_) for an illustrated overview of how
+the host device and the guest driver communicate.
+
+The :c:type:`vring_virtqueue` struct models a virtqueue, including the
+ring buffers and management data. Embedded in this struct is the
+:c:type:`virtqueue` struct, which is the data structure that's
+ultimately used by virtio drivers:
+
+.. kernel-doc:: include/linux/virtio.h
+    :identifiers: struct virtqueue
+
+The callback function pointed by this struct is triggered when the
+device has consumed the buffers provided by the driver. More
+specifically, the trigger will be an interrupt issued by the hypervisor
+(see vring_interrupt()). Interrupt request handlers are registered for
+a virtqueue during the virtqueue setup process (transport-specific).
+
+.. kernel-doc:: drivers/virtio/virtio_ring.c
+    :identifiers: vring_interrupt
+
+
+Device discovery and probing
+============================
+
+In the kernel, the virtio core contains the virtio bus driver and
+transport-specific drivers like `virtio-pci` and `virtio-mmio`. Then
+there are individual virtio drivers for specific device types that are
+registered to the virtio bus driver.
+
+How a virtio device is found and configured by the kernel depends on how
+the hypervisor defines it. Taking the `QEMU virtio-console
+<https://gitlab.com/qemu-project/qemu/-/blob/master/hw/char/virtio-console.c>`__
+device as an example. When using PCI as a transport method, the device
+will present itself on the PCI bus with vendor 0x1af4 (Red Hat, Inc.)
+and device id 0x1003 (virtio console), as defined in the spec, so the
+kernel will detect it as it would do with any other PCI device.
+
+During the PCI enumeration process, if a device is found to match the
+virtio-pci driver (according to the virtio-pci device table, any PCI
+device with vendor id = 0x1af4)::
+
+	/* Qumranet donated their vendor ID for devices 0x1000 thru 0x10FF. */
+	static const struct pci_device_id virtio_pci_id_table[] = {
+		{ PCI_DEVICE(PCI_VENDOR_ID_REDHAT_QUMRANET, PCI_ANY_ID) },
+		{ 0 }
+	};
+
+then the virtio-pci driver is probed and, if the probing goes well, the
+device is registered to the virtio bus::
+
+	static int virtio_pci_probe(struct pci_dev *pci_dev,
+				    const struct pci_device_id *id)
+	{
+		...
+
+		if (force_legacy) {
+			rc = virtio_pci_legacy_probe(vp_dev);
+			/* Also try modern mode if we can't map BAR0 (no IO space). */
+			if (rc == -ENODEV || rc == -ENOMEM)
+				rc = virtio_pci_modern_probe(vp_dev);
+			if (rc)
+				goto err_probe;
+		} else {
+			rc = virtio_pci_modern_probe(vp_dev);
+			if (rc == -ENODEV)
+				rc = virtio_pci_legacy_probe(vp_dev);
+			if (rc)
+				goto err_probe;
+		}
+
+		...
+
+		rc = register_virtio_device(&vp_dev->vdev);
+
+When the device is registered to the virtio bus the kernel will look
+for a driver in the bus that can handle the device and call that
+driver's ``probe`` method.
+
+At this point, the virtqueues will be allocated and configured by
+calling the appropriate ``virtio_find`` helper function, such as
+virtio_find_single_vq() or virtio_find_vqs(), which will end up calling
+a transport-specific ``find_vqs`` method.
+
+
+References
+==========
+
+_`[1]` Virtio Spec v1.2:
+https://docs.oasis-open.org/virtio/virtio/v1.2/virtio-v1.2.html
+
+.. Check for later versions of the spec as well.
+
+_`[2]` Virtqueues and virtio ring: How the data travels
+https://www.redhat.com/en/blog/virtqueues-and-virtio-ring-how-data-travels
+
+.. rubric:: Footnotes
+
+.. [#f1] that's why they may be also referred to as virtrings.