Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 75 insertions, 0 deletions

diff --git a/Documentation/driver-api/tty/index.rst b/Documentation/driver-api/tty/index.rst
new file mode 100644
index 000000000..c1ffe3d1e
--- /dev/null
+++ b/Documentation/driver-api/tty/index.rst
@@ -0,0 +1,75 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===
+TTY
+===
+
+Teletypewriter (TTY) layer takes care of all those serial devices. Including
+the virtual ones like pseudoterminal (PTY).
+
+TTY structures
+==============
+
+There are several major TTY structures. Every TTY device in a system has a
+corresponding struct tty_port. These devices are maintained by a TTY driver
+which is struct tty_driver. This structure describes the driver but also
+contains a reference to operations which could be performed on the TTYs. It is
+struct tty_operations. Then, upon open, a struct tty_struct is allocated and
+lives until the final close. During this time, several callbacks from struct
+tty_operations are invoked by the TTY layer.
+
+Every character received by the kernel (both from devices and users) is passed
+through a preselected :doc:`tty_ldisc` (in
+short ldisc; in C, struct tty_ldisc_ops). Its task is to transform characters
+as defined by a particular ldisc or by user too. The default one is n_tty,
+implementing echoes, signal handling, jobs control, special characters
+processing, and more. The transformed characters are passed further to
+user/device, depending on the source.
+
+In-detail description of the named TTY structures is in separate documents:
+
+.. toctree::
+   :maxdepth: 2
+
+   tty_driver
+   tty_port
+   tty_struct
+   tty_ldisc
+   tty_buffer
+   tty_ioctl
+   tty_internals
+   console
+
+Writing TTY Driver
+==================
+
+Before one starts writing a TTY driver, they must consider
+:doc:`Serial <../serial/driver>` and :doc:`USB Serial <../../usb/usb-serial>`
+layers first. Drivers for serial devices can often use one of these specific
+layers to implement a serial driver. Only special devices should be handled
+directly by the TTY Layer. If you are about to write such a driver, read on.
+
+A *typical* sequence a TTY driver performs is as follows:
+
+#. Allocate and register a TTY driver (module init)
+#. Create and register TTY devices as they are probed (probe function)
+#. Handle TTY operations and events like interrupts (TTY core invokes the
+   former, the device the latter)
+#. Remove devices as they are going away (remove function)
+#. Unregister and free the TTY driver (module exit)
+
+Steps regarding driver, i.e. 1., 3., and 5. are described in detail in
+:doc:`tty_driver`. For the other two (devices handling), look into
+:doc:`tty_port`.
+
+Other Documentation
+===================
+
+Miscellaneous documentation can be further found in these documents:
+
+.. toctree::
+   :maxdepth: 2
+
+   moxa-smartio
+   n_gsm
+   n_tty