KVM: SEV: Do cache maintenance on the source VM during intra-host migrationgrafted

Manually perform cache maintenance on the source VM during intra-host
migration to ensure no stale data is left in CPU caches after the VM is
destroyed.  Because the source VM is "converted" to a non-SEV VM, KVM's
memory reclaim flows won't trigger cache maintenance, e.g. when all guest
memory is reclaimed in response to detaching from the mmu_notifier.

Note, relying on the destination VM to do cache maintenance isn't an option
as KVM doesn't require identical guest memory configurations, i.e. the
source VM may have access to memory that the destination VM does not.
Enforcing equivalent memory configurations is infeasible, as it would
require a *deep* comparison of memslots, e.g. to verify that not only are
the memslot identical, but what the memslots point at is also identical.

Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration")
Cc: stable@vger.kernel.org
Reported-by: Stefan Teodorescu <fane@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260923163721.1584779-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 75 insertions, 0 deletions

diff --git a/Documentation/driver-api/tty/index.rst b/Documentation/driver-api/tty/index.rst
new file mode 100644
index 000000000..c1ffe3d1e
--- /dev/null
+++ b/Documentation/driver-api/tty/index.rst
@@ -0,0 +1,75 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===
+TTY
+===
+
+Teletypewriter (TTY) layer takes care of all those serial devices. Including
+the virtual ones like pseudoterminal (PTY).
+
+TTY structures
+==============
+
+There are several major TTY structures. Every TTY device in a system has a
+corresponding struct tty_port. These devices are maintained by a TTY driver
+which is struct tty_driver. This structure describes the driver but also
+contains a reference to operations which could be performed on the TTYs. It is
+struct tty_operations. Then, upon open, a struct tty_struct is allocated and
+lives until the final close. During this time, several callbacks from struct
+tty_operations are invoked by the TTY layer.
+
+Every character received by the kernel (both from devices and users) is passed
+through a preselected :doc:`tty_ldisc` (in
+short ldisc; in C, struct tty_ldisc_ops). Its task is to transform characters
+as defined by a particular ldisc or by user too. The default one is n_tty,
+implementing echoes, signal handling, jobs control, special characters
+processing, and more. The transformed characters are passed further to
+user/device, depending on the source.
+
+In-detail description of the named TTY structures is in separate documents:
+
+.. toctree::
+   :maxdepth: 2
+
+   tty_driver
+   tty_port
+   tty_struct
+   tty_ldisc
+   tty_buffer
+   tty_ioctl
+   tty_internals
+   console
+
+Writing TTY Driver
+==================
+
+Before one starts writing a TTY driver, they must consider
+:doc:`Serial <../serial/driver>` and :doc:`USB Serial <../../usb/usb-serial>`
+layers first. Drivers for serial devices can often use one of these specific
+layers to implement a serial driver. Only special devices should be handled
+directly by the TTY Layer. If you are about to write such a driver, read on.
+
+A *typical* sequence a TTY driver performs is as follows:
+
+#. Allocate and register a TTY driver (module init)
+#. Create and register TTY devices as they are probed (probe function)
+#. Handle TTY operations and events like interrupts (TTY core invokes the
+   former, the device the latter)
+#. Remove devices as they are going away (remove function)
+#. Unregister and free the TTY driver (module exit)
+
+Steps regarding driver, i.e. 1., 3., and 5. are described in detail in
+:doc:`tty_driver`. For the other two (devices handling), look into
+:doc:`tty_port`.
+
+Other Documentation
+===================
+
+Miscellaneous documentation can be further found in these documents:
+
+.. toctree::
+   :maxdepth: 2
+
+   moxa-smartio
+   n_gsm
+   n_tty