kbuild: rust: keep Rust objects out of Clang LTO with inline helpersgrafted

Under `CONFIG_LTO_CLANG` + `CONFIG_RUST_INLINE_HELPERS`, one may hit
`objtool` errors such as:

    vmlinux.o: error: objtool: _R..._3Gsp4boot+0xd6a:
    can't find jump dest instruction at .text._R..._3Gsp4boot+0x1dfd

The reason is that in such builds, the Clang invocation that compiles
the combined Rust plus helpers bitcode emits LLVM bitcode (again) --
the final code generation happens in the linker's LTO step, which the
`-mllvm` trap options passed to Clang do not reach.

This, in turn, means that unreachable traps are missing, and the
impossible paths do not merely fallthrough to the next symbol, but past
the end of their own section, since LTO builds place each function in
its own section.

Thus filter `CC_FLAGS_LTO` out of the Clang invocation, so that it always
emits machine code directly, with the traps in place.

Assisted-by: LLM
Cc: Gary Guo <gary@garyguo.net>
Cc: Boqun Feng <boqun@kernel.org>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Matthew Maurer <mmaurer@google.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Fixes: 3a2486cc1da5 ("kbuild: rust: provide an option to inline C helpers into Rust")
Acked-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260816133233.197500-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

1 files changed, 75 insertions, 0 deletions

diff --git a/Documentation/driver-api/tty/index.rst b/Documentation/driver-api/tty/index.rst
new file mode 100644
index 000000000..c1ffe3d1e
--- /dev/null
+++ b/Documentation/driver-api/tty/index.rst
@@ -0,0 +1,75 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===
+TTY
+===
+
+Teletypewriter (TTY) layer takes care of all those serial devices. Including
+the virtual ones like pseudoterminal (PTY).
+
+TTY structures
+==============
+
+There are several major TTY structures. Every TTY device in a system has a
+corresponding struct tty_port. These devices are maintained by a TTY driver
+which is struct tty_driver. This structure describes the driver but also
+contains a reference to operations which could be performed on the TTYs. It is
+struct tty_operations. Then, upon open, a struct tty_struct is allocated and
+lives until the final close. During this time, several callbacks from struct
+tty_operations are invoked by the TTY layer.
+
+Every character received by the kernel (both from devices and users) is passed
+through a preselected :doc:`tty_ldisc` (in
+short ldisc; in C, struct tty_ldisc_ops). Its task is to transform characters
+as defined by a particular ldisc or by user too. The default one is n_tty,
+implementing echoes, signal handling, jobs control, special characters
+processing, and more. The transformed characters are passed further to
+user/device, depending on the source.
+
+In-detail description of the named TTY structures is in separate documents:
+
+.. toctree::
+   :maxdepth: 2
+
+   tty_driver
+   tty_port
+   tty_struct
+   tty_ldisc
+   tty_buffer
+   tty_ioctl
+   tty_internals
+   console
+
+Writing TTY Driver
+==================
+
+Before one starts writing a TTY driver, they must consider
+:doc:`Serial <../serial/driver>` and :doc:`USB Serial <../../usb/usb-serial>`
+layers first. Drivers for serial devices can often use one of these specific
+layers to implement a serial driver. Only special devices should be handled
+directly by the TTY Layer. If you are about to write such a driver, read on.
+
+A *typical* sequence a TTY driver performs is as follows:
+
+#. Allocate and register a TTY driver (module init)
+#. Create and register TTY devices as they are probed (probe function)
+#. Handle TTY operations and events like interrupts (TTY core invokes the
+   former, the device the latter)
+#. Remove devices as they are going away (remove function)
+#. Unregister and free the TTY driver (module exit)
+
+Steps regarding driver, i.e. 1., 3., and 5. are described in detail in
+:doc:`tty_driver`. For the other two (devices handling), look into
+:doc:`tty_port`.
+
+Other Documentation
+===================
+
+Miscellaneous documentation can be further found in these documents:
+
+.. toctree::
+   :maxdepth: 2
+
+   moxa-smartio
+   n_gsm
+   n_tty