Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 54 insertions, 0 deletions

diff --git a/Documentation/driver-api/tee.rst b/Documentation/driver-api/tee.rst
new file mode 100644
index 000000000..4d58ac071
--- /dev/null
+++ b/Documentation/driver-api/tee.rst
@@ -0,0 +1,54 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============================================
+TEE (Trusted Execution Environment) driver API
+===============================================
+
+Kernel provides a TEE bus infrastructure where a Trusted Application is
+represented as a device identified via Universally Unique Identifier (UUID) and
+client drivers register a table of supported device UUIDs.
+
+TEE bus infrastructure registers following APIs:
+
+match():
+  iterates over the client driver UUID table to find a corresponding
+  match for device UUID. If a match is found, then this particular device is
+  probed via corresponding probe API registered by the client driver. This
+  process happens whenever a device or a client driver is registered with TEE
+  bus.
+
+uevent():
+  notifies user-space (udev) whenever a new device is registered on
+  TEE bus for auto-loading of modularized client drivers.
+
+TEE bus device enumeration is specific to underlying TEE implementation, so it
+is left open for TEE drivers to provide corresponding implementation.
+
+Then TEE client driver can talk to a matched Trusted Application using APIs
+listed in include/linux/tee_drv.h.
+
+TEE client driver example
+-------------------------
+
+Suppose a TEE client driver needs to communicate with a Trusted Application
+having UUID: ``ac6a4085-0e82-4c33-bf98-8eb8e118b6c2``, so driver registration
+snippet would look like::
+
+	static const struct tee_client_device_id client_id_table[] = {
+		{UUID_INIT(0xac6a4085, 0x0e82, 0x4c33,
+			   0xbf, 0x98, 0x8e, 0xb8, 0xe1, 0x18, 0xb6, 0xc2)},
+		{}
+	};
+
+	MODULE_DEVICE_TABLE(tee, client_id_table);
+
+	static struct tee_client_driver client_driver = {
+		.probe		= client_probe,
+		.remove		= client_remove,
+		.id_table	= client_id_table,
+		.driver		= {
+			.name		= DRIVER_NAME,
+		},
+	};
+
+	module_tee_client_driver(client_driver);