selftests/bpf: Test packet range of pointers sharing an idgrafted

Add tests where two packet pointers share an id and tightening one
pointer's umax from its var_off would put it less than their constant
distance from the other's umax: with an index & 0x38 capped at 50, the
base pointer keeps umax 50, so the pointer 8 bytes further on must keep
umax 58, even though its known bits allow at most 56.

These refused a valid program or accepted an out-of-bounds access before
the fix:

- check the advanced copy, load through the base: valid, was refused;
- check the base, load the byte at base + 1 through a copy advanced by
  8: was accepted;
- check base + 4, load 4 bytes at base + 2 through base + 8: reads two
  bytes past the checked range, was accepted;
- the same as the second with data_meta pointers checked against data:
  was accepted.

These pass with and without the fix and cover nearby paths:

- subtract an unknown scalar from a checked pointer and load below it
  (the range is kept across a new id);
- reach a load through two paths whose checks cover 8 and 7 bytes after
  the loaded pointer; the second path must not be pruned by the first;
- spill a copy of a pointer, check the pointer, fill the copy and load
  one byte past the checked range: the load is refused, and the copy
  has the range of the check.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20261001145255.855630-2-alexei.starovoitov@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>

1 files changed, 54 insertions, 0 deletions

diff --git a/Documentation/driver-api/tee.rst b/Documentation/driver-api/tee.rst
new file mode 100644
index 000000000..4d58ac071
--- /dev/null
+++ b/Documentation/driver-api/tee.rst
@@ -0,0 +1,54 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============================================
+TEE (Trusted Execution Environment) driver API
+===============================================
+
+Kernel provides a TEE bus infrastructure where a Trusted Application is
+represented as a device identified via Universally Unique Identifier (UUID) and
+client drivers register a table of supported device UUIDs.
+
+TEE bus infrastructure registers following APIs:
+
+match():
+  iterates over the client driver UUID table to find a corresponding
+  match for device UUID. If a match is found, then this particular device is
+  probed via corresponding probe API registered by the client driver. This
+  process happens whenever a device or a client driver is registered with TEE
+  bus.
+
+uevent():
+  notifies user-space (udev) whenever a new device is registered on
+  TEE bus for auto-loading of modularized client drivers.
+
+TEE bus device enumeration is specific to underlying TEE implementation, so it
+is left open for TEE drivers to provide corresponding implementation.
+
+Then TEE client driver can talk to a matched Trusted Application using APIs
+listed in include/linux/tee_drv.h.
+
+TEE client driver example
+-------------------------
+
+Suppose a TEE client driver needs to communicate with a Trusted Application
+having UUID: ``ac6a4085-0e82-4c33-bf98-8eb8e118b6c2``, so driver registration
+snippet would look like::
+
+	static const struct tee_client_device_id client_id_table[] = {
+		{UUID_INIT(0xac6a4085, 0x0e82, 0x4c33,
+			   0xbf, 0x98, 0x8e, 0xb8, 0xe1, 0x18, 0xb6, 0xc2)},
+		{}
+	};
+
+	MODULE_DEVICE_TABLE(tee, client_id_table);
+
+	static struct tee_client_driver client_driver = {
+		.probe		= client_probe,
+		.remove		= client_remove,
+		.id_table	= client_id_table,
+		.driver		= {
+			.name		= DRIVER_NAME,
+		},
+	};
+
+	module_tee_client_driver(client_driver);